I keep coming across this site while researching my reassembly effort so I thought I would make a few posts about it while I am at it.
It started life when my dad bought a Jrx pro se In I think 92 then decided that he needed a better one which...
Last post
That's cool. I don't think I trust my 3d printer to print parts like that though. What are you using? PLA? Printer?
PLA filament Anycubic Vyper. The 3d print is obviously not ideal but should work for what I'm doing at the moment. When I started...
I scraped my Jrx@ project for a something a bit more modern, a Pro SE. Thanks to Bearrickster for the body as well as the chassis for this build. I have a retro fit tranny that will be installed in this car. The shock bodies and motor plate were...
Last post
.... Man I need to get some new pics up don't I?
Jake
I love it the way related topics are suggested, no matter how old they are.
@ Jake, so were 12 years enough to make some newer pics?
I'm embracing the big ass battery idea.
Created some battery hold downs, swapped the 3d printed standoffs for aluminum ones, got some fresh JConcepts tires demounted and put onto a set of my Pro wheels.
IMG_20240319_001253429.jpg...
Hey all, I picked up a JRX2 a couple weeks back originally with the intention of just restoring it but now I’ve decided to get her running in the local 17.5 class. First, a little backstory about myself: I started racing off road Production class...
Last post
The screws would most likely fit the RC10 just fine, but since AE and Team Losi 8/32 countersunk holes/screws used different angles for some reason, not ideal for Losi stuff.
Main reason is 100deg is lower profile than standard 82deg hardware...
Well, as the builds progress for the Pro and Pro SE, I am still locating parts. My Pro SE is complete with a completely restored slipper and hydra drive, but for my Pro I am looking to add a slipper that has a little more capacity...
Last post
Well, I ordered all the necessary parts already from all over the web and now i just need the A-3120 shaft. After that I should be ready to assemble. I ended up using an 86T Losi 22 Kevlar spur since the article says anything from a 22 will work. at...
I just joined today and appreciate having this be my first post of hopefully several. I have been in and out of RC since I was a young teen and now that I am 46, I feel like that young teen again working on my Pro SE. Long story...
Last post
I stripped and recoated the links and ball studs for my pro and pro se last night using a Caswell black oxide system. It works great as long as parts are thoroughly clean and dry.
Does anyone know a place where I could get titanium upgrades in...
Anyone know where I can find the really thin orings used inside the shock cap? I searched all over last night and found nothing. I think it’s same size for all Jrx models.
I came across this kit but wasn’t sure if it included the oring. Any help?...
Last post
Appreciate the dimensions. At the $5 for 50 price on Amazon, my great grandkids would have replacements. Thanks for the voice of reason.
I'm dusting off my Team Losi Junior T and I'd like to replace it's NICD ZipPak with a Li-ion battery preferably with a longer run time. Previously I remember getting 15 minutes or so of run time.
Any recommendations or changes to the...
Last post
Hi Everyone,
I'm dusting off my Team Losi Junior T and I'd like to replace it's NICD ZipPak with a Li-ion battery preferably with a longer run time. Previously I remember getting 15 minutes or so of run time.
The machine cut decals for the xx and xxt are sorta scarce. I was fortunate to have found a pair in yellow and pink for the xxt 17 years ago. My question is, were those the only colors available
All i can find on the Google machine is this picture...
Last post
Pink and yellow XX and XXT was all they sold. I believe the team drivers got theirs cut in a variety of colors not available to the public.
I've put a request in the wanted section for some parts I need for a NIB LosiXX build - as a result i've been told of a possible source for some of them, however I need the part number for the Blue Trinity brace that goes across the inner hingepins...
Last post
14 years later, I hope he got an answer before this lol.
Does anyone know if the outer piece of a XXX-S and a XXX-4 Front axle are the same.
I know they have different part # in the manual ,but I'm thinking that's because they are sold as axle sets.
Thanks for any help.
Last post
Somewhat related question...
Does the JRX-S LCD rebuild kit fit the XXX-4 LCDs?
Looking at pics, the axle and bone interface look the same, but the JRX barrel looks much shorter. Is that an illusion because it is also thicker than the X4 version?
I bought this JRX-T from another forum member years ago - it may have been from Bearickster(?), I'm not entirely sure.
Anyhow, I never found the time to do anything with it, so I am making plans to sell it on to another member.
This model has a...
Last post
Brilliant! Thanks very much for the detailed response.
I am planning to use this on an LXT where the tower sits flush with the bulkhead, so this should bolt right on (after I massively enlarge the standoff holes to account for my poor measuring and...
I thought it would be great to have a STICKY thread here where everyone posts their favorite pictures of all their Losi vehicles. This can help make up for all the lost pictures from Photo bucket.
Last post
These are 90% of my Losi buggies, the Heavy Metal body is mounted on a XX4 WE.
Need to finish painting my BK2 & Junior T and do another shoot with the trucks.
If anyone knows where I can get a Dodge Stratus body to replace the monstrosity on my new...
Since my other car projects are about 90% done, it makes sense that I forget about them and dive into another.
Here's my JRX Pro-SE. My parents bought it for me very late in my RC car racing phase so I raced it very little and did very poorly...
Last post
So I have a XXX buggy I overpaid for that I'm in the process of collecting parts and, in research, I saw there were a number of rare aluminum parts made for it. While finding those for a reasonable amount seems futile at this point, I got the idea...
So I picked up another used Losi LXT. This one seems in decent shape over all with one major issue. The right rear driveshaft is broken/missing (pictures attached). I got a few accessories that included rear universal shafts and I think they...
Last post
You ordered the correct dogbone. The telescoping driveshafts can be used with the retrofit trans if you get the A-3095 outdrives.
Thank you!
Do you know if bodies from other LOSI 1/10 scale trucks fit the LXT or even if a body from other brands...
Hello I have recently received a losi XX, This is my first real vintage buggy and I have putting many hours of work into this to make this as close to my Dads 1998 reedy race winning buggy I have already replace all the screws and ball studs with...
Last post
Gluing the hydradrive together sounds kite destroying the hydradrive. What would be the purpose of that? To make it so it can't slip?
I personally do not know but I have to order a lot of stuff now
Hello, I am looking for a replacement Ford focus body for my Losi Rally Weapon. I have read this body was made by Parma, so I am thinking other ford focus models may have used the same body. Any input is greatly appreciated.
Decided to take the Factory Works comical chassis out of it's bag and strap some parts to it. More to come later but since the parts car had JRX-T wheels on it decided to see how silly a Mini JRX-T body looks on it. fun fact it's almost the same...
Last post
Truck tires go well with a comical buggy. I'm confused though about this:
I have some ideas for how I'm going to arrange the electronics to keep the nose down.
Keep the nose down? I think the goal should be just finding a way to keep it from...
So I recently got this Losi buggy that I am fixing up and it says JRX2 on the front of it in the plastic molding but it does not have the weird rear suspension arms of a JRX2. It guess it is pretty JRX Pro like but it does not have the big socks up...
Last post
That poor motor is overgeared like crazy, good thing it has that heat sink :mrgreen:
It ran really good! I went hard for like 5 min straight on a baseball field before it started to get hot. It went 33 mph on pavement which was quicker than I...
Hey guys, I always had Kyosho RC cars growing up but I recently had a chance to get 2 Losi RC's and I was able to get both of them for a total of $100. I had to give them a try! They are by no means shelf queens but that is good because I am going...
Last post
Thank you! It has the same part number A-3124 for 133 and 136. So this looks like everything?
Yep, looks like you'll need the longer spring as well then you should be good to go.
Ok been a long time, I’m on the FB some but figured I’d post a build thread here as I’ll have questions. I didn’t get into Losi until the XX car.
Backstory: At the races and I pit next to my buddy that also owns a LHS. One of his regulars, an...
Last post
I like that they're so complete, even has the electronics connected. Like they came right off the track and into a storage box a few decades ago. Congrats, they look like fun projects!
This is my first post on the board. I figured it would be appropriate to share some photos of my Losi XX. This is the form it was in circa 1995 when I stopped racing. It has just followed me around through multiple houses and...
Last post
Great looking car. Glad you hung onto it all these years. You have some nice and hard to find upgrades on it.
Hi guys , I've just purchased what ive been told is a psi racing xxxt conversion, any one give me any info ? Screenshot_20231005_081444_eBay.jpg Screenshot_20231005_081437_eBay.jpg cheers all.
First and foremost, a HUGE shoutout and appreciation to Larry Doe for helping me make this dream a reality. Larry was kind enough to bring my car down with him for the IFMAR worlds this past week at Hobby Action Raceway in Chandler, AZ for me to...
Here goes my first XX4 build. I recently bought Shoman24v's beautiful XX4. I have long since admired this build, and could not resist the chance to own it. It is a nearly all new build.
However, after I received it I decided it had to have all the...
Last post
the only thing with the older buggy, is to work on them it a lot longer then the new buggy
I built this XX4 for a friend. I wasn't too concerned about having era correct equipment, but I loosely based it on something you may see in the early 2000's. I mostly just built it to what I thought looked nice.
I was building a pair of runners from several incomplete cars and my used parts stash and noticed some variations among the parts.
There are 3 types of rear bulkhead. The upper left one has been hacked up by the previous owner, but you can see on...
Last post
Early shocks also had a longer 'tab' on top, with the hole closer to the upper portion (not centered top to bottom). I don't have a picture as a comparison.
Hello gentlemen!
Here's my latest FB marketplace score! From the looks of it, there are a number of upgrades on this beast but I've never ran a jrxt before so I can't say for certain. That being said, I think I'm going to just clean this one up as...
Last post
Nice truck! That should clean up good. The upgrades that I see are.. Tecnacraft turnbuckles, ball bearing steering arms, Pure-Tech battery strap, Lightspeed Litesink and A&L Powerclutch. Also has AE antenna mount and AE battery box used as a esc...
Not going to be much more newbie than this series of questions.
This vehicle is a JRX2 or a JRXT? I know the wheels should be a dead giveaway, but there are a couple of things (body mounts) going on with this rig that say it ain't a T.
LOSI JRX...
Last post
Thank all!
Anyone have a Pro SE chassis sitting around that could take some dimensions for me? I am thinking about narrowing this plate down to SE specs, like the Cox Bros. and later Lavigna did, so that I can run an A&L body that I have for a SE....
Interested in buying some RPM wide rear links for the JrxT I’m working on, but I’ve got the retro XX trans which uses dog bones vs. the telescoping stock driveshafts. I’m worried with the additional width they might put the drive pins to...
Last post
If anyone has some they’d be willing to part with let me know! Thx
I am building this JRXT to go with an amazing painted A&L Roadkill body I have. I plan to build it in sort of a vintage oval racer manner, with short shocks and Factory Works towers. I think the 5 link rear suspension will go great with the body.
I...
Last post
That is one cool build! The stance, colors, and carbon just look right, truly is functional art.
Not sure where to put this so since the wheels are going on my JrXT I’ll ask here…. Got a set of front HPI super star wheels with the purchase of the JRXT, but the 3/16x3/8 bearings from the stock front wheels are too small for the HPI wheels….The...
Last post
Could someone please provide information on the front wheel bearing size for the HPI MT Super Star? Thanks!
It depeds on which adapter you have to use. Look at the above pictures.
So I’m putting together a runner JRXT and the original shocks that came with it had the normal broken shock collars and one of the shock cartridges is leaking a bit….
Wanted to know if I could use these shock bodys with shock cartridge A5015 and...
Last post
The JRXT uses .9 shocks front and rear (assuming 5-link suspension and shock tower). The original shock seal cartridges are a different length inside and out though, so when you use the newer style cartridge, you need to use the included spacers to...
Hey all, thanks for the help with all my noob questions so far here!! I just purchased a spare parts lot and I’m hoping y’all can help me identify some of these parts.
Came with this motor plate says JRx2 and it’s like a flat blue anodizing…. This...
Last post
Appreciate the reply!
So x2 and xT have same rear bulkhead but the x2 has wing tubes? Thats the only difference?
Yes, they're both the same part. The wing tubes just press in.
Picked these up but no nothing about them. What years were these made, how rare are they, were they a decent shock?
DSCF4142.JPG DSCF4143.JPG DSCF4144.JPG
Last post
Since nobody mentioned a date, these are in a Trinity 1992 catalog. I'd need to dig more to see if they came out earlier. I do know that Trinity had blue ano Clod shocks back in 1990, but they have a different design.
Picked up a very rough JRXT I’m working on restoring for a runner and it has a retrofit trans which is cool, but what does everyone do for the rear body mount?
The parts gathering for this build has achieved a critical mass and is ready for some assembly.
Last post
Replaced the used front axles, spindles, uprights and king pins with new parts. Also upgraded all the ball studs with Losi A-9945 & A-9947 titanium ones.
The last byggy I raced was a XX CR back in -97. I still have it, but I can´t get myself to drive it.
So when a XX showed up on a local auction site I waited patiently until the last 15 seonds and placed my bid. Won it at $90!
The Tekin charger was...
Users browsing this forum: Bing [Bot] and 62 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Bing [Bot] and 62 guests