RC10Talk - The Net's Largest Vintage R/C Community

Pics say it all. Never seen anything like this before. Epic.

Screenshot_20210116-205639.jpg

Screenshot_20210116-205949.jpg

Screenshot_20210116-205849.jpg

Screenshot_20210116-210102.jpg

Screenshot_20210116-210549.jpg

I need some help from you guys.
Is there a Yokomo wheel that has a offset that is between ZC-827C and ZC-835?
I have a pair of ZC-827C and they rub the steering knuckles and at full steer the shocks.
and I tested a pair of ZC-835 and then the car...

Hi there,

I’m currently in the process of cleaning up a ‘94 (that seems the have a fair bit of pavidis spec parts on it) and I’m not sure where to look for parts. Even eBay seems slim and searching google for stores I am coming up blank.

Any tips?

Hey was thinking about having my buddy make some sets of wheel adapters to use the JC racing Yokomo adapters and was wondering what everyone thought.

Does anyone know the technical specs of this vintage brushed motor? Can't find anything in the Web so far.

Team Yokomo Pro Stock S-117 Single

Thank you!

I've recently become interested in early Yokomo products and was lucky enough to score an RPS Yokomo YZ-834B off eBay. It is a bit of a rough example, but a survivor nonetheless.

Almost as important as the car itself is the documentation that came...

So I’ve been on the fence ready to pull the trigger on a rere XLS or Optima but for some reason I just could not bring myself to fire. As the last few years have passed I’ve kind of fallen out of love with the entire rere thing. It kind of happened...

Hi all, found this tidy car but confused about its origins.
I didnt think the YZ-10 had an upper deck, but this one does also it has gold anodised shocks which i thought was team associated? If i remember right yokomo has a purply blue anodising on...

Hi, does anyone know if these are arms for the Yokomo 870c and YZ10? Or will they work? Thanks.

I'm not as familiar with the early Yokomo off-road cars and have started reading up on it (and checking the forum). Regarding the 1987 YZ870C Super Dog Fighter and YZ10, I understand that some parts are interchangeable. How far does it go where...

HEllo folks,

I just just completed this one yesterday evening, this will be the last of my covid-projects as the track has reopened and the racing season has resumed.

I was gifted this car (and a few others!) about two decades ago by my racing...

Hello,

I have given up trying to find 834b wing buttons and am now going to have a set made. Could anybody who owns a Yokomo 834B be kind enough to provide me with the measurements in mm and some close up pics so I can have them machined? I know...

So there’s plenty of information on converting to hex drives which I don’t want to do.

I’m looking for a driveshaft solution for my 870C where I can retain the existing square drive, are there any readily available options that don’t mess with...

Here is a photo of my 92 works build. I need to modify the topdeck slightly to fit the 870c body correctly. I also have a new wing, wing wire and wing buttons. I just installed the used wing to see what it looked like.

Hi all,
Picked up a nice stock 870C and it had RPM Bulkheads along with stock magnesium ones, does anyone know where I could source some NOS RPM Yokomo associated parts?
Thank you in advance
Crutchy

Hi,
I just found these parts and I would like to know if these parts from Andy's only fits the Yokomo YZ10 or another car too?
Also how do you distinguish if they are the long or the short version?
Thanks to all from Canada.
frenchboomer

Hey everyone,

I am trying to find out the difference in length between the MX-4 and MR-4BC. Specifically from the lower gearbox/bulkhead mounting holes. I dont have a MX-4 chassis on hand.

I am going to have a longer MR-4TC Special chassis cut to...

Hi all, I want to lock the one way centre puller on my yz10 94. Does anyone have any suggestions how I can do this without ruining the one way. I wondered if any of the touring car parts would fit, but allow me to run the slipper still.
Any help is...

So I have a couple sets of tires that look the same but one set is labeled at Hot Laps and the other has Associated logo on it. I'm assuming they're all Hot Laps tires....just Associated wanted their name on some? What kit did the Assoc. tires come...

Hi guys,

New member here and thought I’d join as I’m getting back into the RC hobby after a 15 year break and catching up on what I’ve missed and finding out that all the models I used to race are now classed as vintage has certainly opened my eyes...

yokomo.jpg So I've been digging around for a bit and learned quite a bit but my car I came across has had a few mods from stock and I was wondering if anyone can identify what the other parts possibly are? I can post more pics later as well. Plus I...

Hi any of you have Instruction manual for Yokomo RC12L4Y 2006 World Edition?

I have posted this in my Works '92 thread as it will be going on to that build, but I just thought i would start a new item-specific thread in case anybody is researching these rare (and very beautiful) items and wants to search for info.

This is...

Hi guys, I have a runner 870c and I've broke a couple of rear hubs, I'm now down to my last few, I already have Andys front hubs but I'm after any rear hubs, plastic or nylon if anyone has any great ideas?
Searched the usual suspects but none...

hi all, i have another yz10 question! i want to upgrade the turnbuckles on my 94 yz10 to works titanium. struggling to find the genuine ones, does anyone know if anyone make a reproduction set that look similar?

Got this guy in a large lot of cars and I'm quite the Yokomo noob. Been getting a crash course on vintage Yokomo lately.
I think it may be a YZ-870C? But there appears to be multiple models of the 870C?
Any Identification help would be appreciated.

This one should end up being very close to stock spec.

Hey all, I'm new to this site. Came across these forums from a google search. Really enjoying reading about the old vintage RC cars.....
I raced BMX, religiously, from age 8-14. After the 2nd of 3 moto's, there was always an intermission and some...

As per the title I’m looking for a new bumper for my yz10 94, as the original zr-111 are very hard to find, I just wondered if reproduction ones are available from anywhere??

hi all,
im in the process of restoring my yz10 94, which has the white frp shock towers (at least i think they are frp?). does anyone know if these are available as a reproduction ?
i have found some places that make the carbon ones, but not the...

What tires came stock on the 94 yz10?

Hi i'm getting corrosion on my Yokomo shelve queens magnesium parts, what could be doing this as they have been in cabinets for years & only just noticed the other day the corrosion. Any help with stopping this would be appreciated.

hi
im looking to restore a yz10 94 that i have, i just wondered what / if companies out there offer any reproduction or aftermarket parts similar to the originals?
decals, the wheel disc decals and also the screws which hold the wheels on mainly,...

Just got an email from John at JC racing products and he said he is almost done with the mold for the deeper offset 870c wheels. He said he hopes to have them for sale by first or second week of January.

Hi all

I need some inspiration to get this battery layout done, can someone give me the correct way to resolder C cells to make this work.

Also where to mount the esc? with no top plate these are a pain to fit all the electrics in especially with...

Looking for the YS-2R and YS-2F spring sets. Really just need the copper springs. For a Works 91 and Works 93.

I do have several sets of the springs in other finishes. Might try to get them copper plated.

Thanks

93E58FCD-27B1-4376-82CA-1E1EE92B7F2C.jpeg Hi all! First time post (new member) for me. I received a box of old RC cars from when I was a young lad. In the box was my Yokomo RPS SE and an Airtronics XL2P controller. I wanted to see what battery...

Since I had a lot of parts laying around, i figured to try and built an shaft driven mx-4. The MX-4 has always been my favourite looking car. The used parts are either from different brands or self designed and built. Chassis is laser cut from...

Hello,

I have what I believe to be a Team Associated graphite chassis for the 1988 YZ10, are these chassis made to be used with the middle chassis spine and tensioner ?

Thanks

Finally got around to cleaning up this beat up old yok. Looking a little better now- fresh pulleys, rear and center caps, tough belts, rebuilt diffs, Robinson spur, and some Hot Trick red g10. Still need to cut the custom upper brace, make a bumper,...

This has found its way to me in the past couple of days.... from what i gather it is a Losi Hydradrive on a Team Suzuki shaft. Having researched them a little I have found a handful of examples fitted onto Works '91, '93 and Pavadis cars.

Does...

Just picked these up - pretty pleased to get hold of them. Listed on eBay as 'Thresher arms'!

Does anybody happen to know where I could find a Drescher front bulkhead or front shock tower to match by any chance? If someone could lead me to some...

This was a fun resto.
One of my favorite bodies, Parma Chenowth.

Hi all,

Half of the fun of these finds is the story

A friend of mine overheard a conversation regarding old RC cars and chimed in that he has something at home that's collecting dust.

Well what he had, was this piece of history!

It came with a...

Hello.

Can anyone help me out with a manual for the Works-91?

I have the manual for the -93 but I really want the -91 instructions as I see some differences.

Friendly

Arne-P. Flesvik

Here is my new custom cnc machined 870c suspension arms for my runner. These are machined out of delrin.

Yeah i was thinking anyone tried modern diffs in the yz10/870 since the bulkheads are pretty wide like modern touring cars.

Does anyone know of a alternative to the stock part or have done a modification. I have not been able to source the OEM part anywhere, but there are similar parts on Ebay for other cars. Thanks.

Derek

Hi guys and dolls here’s my finished yokomo yz10 it was a pleasure to do this as I normally only restore Tamiya’s but I’ve been after one of these for a good few years and finally I have one and it looks rather special I think you’ll agree!! It came...

Just wondering if anyone has run the fine pitch belts in there runner? I'm going to try them in my runner with a 13.5 motor.