This is a tribute to the great line of RC10 buggies produced since 1984-2009 (RC10 - RC10B4). This is a work in progress. It will take some time and help from fellow members, as we all learn new things about the different versions. So please be...
Last post
Question I haven't found a firm answer for... it seems some RC10's have much whiter Nylon than others. I'm not talking about dirt or oxidation/aging etc.. just simply as they came some cars had much whiter nylon. I know this because I was fortunate...
I've seen a previous post about putting B2 CVD's on a gold tub to use B2 tires and wheels. But what do you need for a gold tub to use B4 tires and wheels??
Does anybody know if machined aluminum suspension parts for the original, b2 or b3 buggies is available anywhere? The front and rear arms are available here but I would like to get the rest of the pieces like the suspension mounts, carriers and...
Last post
Thank you Pete and TallPaul. I had forgotten about Inet. I think that there are a few pieces there that will work. Looks like Kranzels also has some machined aluminum. Thanks for the links and if anybody else has additional info or companies please...
The nose tubes are bent on a crazy angle has this thing taken a hit or what?
Last post
The chassis appears to be taco'd some too, at the point where it starts tapering wider towards the center. I have a 10T tub that has the same affliction.
Hi guys, it's been a while since I didn't post a new project here, though I have tons of unfinished projects waiting for me to be retired, LOL
So, I bought this car years ago from a SoCal racer, received it, opened the cardboard to inspect it and...
Last post
I have learned a few things about running on higher grip surfaces like grass and carpet since I returned to Belgium: main goal is to keep enough grip to move forward as it should, but reduce sideways grip to prevent rolling over.
- lower the CG as...
I'm a newbie to this forum, based here in good old blighty (that's the other side of the pond). I've recently bought myself an original RC10 and an original RC10 CE both of which are in mint/unused condition. I always wanted one of these...
Last post
1. how do I restore the whiteness to the white plastic parts? They are a little yellowey and I'd like to bring them back to looking like new...
Painted a body for my B3 runner today, the lighting doesn't do the colors justice though. Turned out better than the last one :roll: but I messed up in a few areas, let me know what you all think.
B3 body start!
B3 body finished!
Top view:...
Last post
Got some photo's of it outside but the lighting wasn't the best since I got home so late. It looks so much better in person though.
Just about to start getting this one ready for some track time. The B3 by far is my favorite buggy of all to...
I painted a new body for my original B4 (first one since I bought it back in 2003) to race with over the summer. It's not perfect but it turned out good enough for me :D. Anyhow, here's some pics!
I've been going pretty heavy on the Losi's for a while but last week I was at home waiting to go to the dentist to have a wisdom tooth pulled - not much fun any time. I needed a distraction do I jumped up on evil bay to see what was going on. I...
Last post
Were there ever black wheels on the CE or are those dyed as well?
you could get them (white, black, and yellow), but only white was included in the kits.
Last night, our last local indoor offroad track ran its final race. We have a couple tracks that are outdoor but they are over an hour away.
Daves place: ( ) has a beautiful outdoor offroad area as well as a dirt oval. I've never had experience...
Last post
A standard rc 10 chassis will work i have one that I toy with at the races, however they are heavy. As far as dirt oval car you have dominator parts which I think are custom work cars but you also have losi. You can take a standard car or truck and...
Hi guys,
I have an RC10 'WORLDs' car and after cleaning it up I'd like to ask for some advise on what parts i should be looking for.
I realy dont like the tie rods that are on this car. They look identical to the early gold pan items and the ball...
Last post
Losi makes a nice natural white (but not RPM white) heavy 4/40 ball cup, same length as the
RPM ones, and easy to find if you look hard the bottom worlds car in the pic has em' (before I found NIP AE ones--
New project, finally have all three of the ascot's by bbt Vindicator, Desperado, and the Challenger. I also came across these down tubes not sure what they went to says that they are for the rc10 anybody seen these before?
Last post
Here is a pic of the 1st version ascot and a pic of the (challenger is the top pic) that I started a while back but I think I might take it apart and have the frame powder coat black not sure yet
what are my options? i am looking for something after market, and period correct. Was thinking a Hotbodies Stealth Bomber (uni-window one) because the stealth fighter body i have wont fit.
any suggest anything? willing to buy also if for sale lol
Last post
yea i have a stealth fighter, way to narrow. the stealth bomber (which i have a crappy painted one) fits perfectly perfectly.. just cant seem to find one lol
I'm starting to build my A&L chassis and want to do something a little different atleast. I have a buggy with what I believe is a A&L front shock tower for the RC10T. My question is, would it look alright on a A&L glass chassis kit?
Last post
Yeah, I thought it would help smooth out jumps a bit but this one will only do shelf duty. The buggy pictured though has a very interesting future I shall share soon ;).
I need some advice, I just picked up this A stamped goldpan, originally I was going to powdercoat and drill for a stealth but upon seeing the A stamp now i'm not so sure. One other thing that troubles me is that there are many scratches in the...
Last post
I've got the CRP collars shown in the first pics that I won't use and they do fit the associated shocks, I may consider selling them if there is any interest in them, they are in great shape, also may consider trades for a chassis or parts.
I hadn't checked into eBay for a day or two and when I did,I found that I had won this MIP tranny for the RC10 for the pittance of US$20!
It's totally complete,apart from the three bolts that hold it together (thankfully) and even includes a NIP...
Last post
Wow,nice XR!
I really like the XT and XR Falcons...The XW GTHO with the 351 Windsor would have to be my fave Falcon,though.
Don't let Bearrickster see that-He has a serious yen for an XA Falcon hardtop,Mad Max style!
A friend and I once welded a...
I'll admit that I'm a lifelong Tamiya nut, having built my first RC car in 1983 or '84 -- the Hornet, because it was all I or my family could afford. I never had money for a Team Associated RC10, but was always in awe of how much more advanced they...
Last post
Hey Steve,
Welcome to the forum. Congrats on your new purchase. I do have to say that if you got the buggy from Dave that you could not have gotten it from a nicer guy. Dave is a true asset to the hobby. It sounds like you have some cool plans for...
Can someone tell me what wheels are featured on the RC10 in this gallery? They're very sharp. Oh, lots of other neat pictures from the recent Japanese hobby show are featured here as well.
Last post
Thanks Jeff -- that's the wheels! Great flyer. Those wheels seem hard to find. I've looked for them in the past, not realizing they were the same wheels in that Time Tunnel photo.
My latest addition to the family. Sweet rolling chassis and white parts acquired from KvilleKrawler,Body and wing from Atlas,and the alloy rims from GMC572.Real happy with it.Looks great on my shelf.Got a new unpainted body with it.Gonna have to...
Last post
that is one sweet tub....i wish i could find one like that....please don't bring it within 100 yards of dirt or concrete.
As promised from my other thread. Here are some pics of my other car: Im far from finished. One question I have is the fact of, if I need to make some braces like aeiou did HERE about a quarter of the way down the page. Also when the suspension is...
I picked one of these up over the weekend. It's brand new but has a horrible pro paint job . I can't seem to find anything on it, anybody got the scoop on what it fits?
Last post
I don't know anything about it. I was hoping it was for RC10
Got my NIP Tekin ESC and receiver installed in my RC10 and it's ready to roll.
Finished the decals,too.
Just a few small items left and it'll be all good. :D
Last post
cool rubber what tires are they on the front?
Vintage Pro-line V-Groove front tires, PN: 019F or 1022.
Want something better than the stcok servo saver in my goldpan and was wondering who (besides associated-have had 0 luck finding any) made ball bearing bellcrank steering kits for the RC10?
Last post
Standoff height is determined by placing the hex portion of the aluminum on the top or bottom
of the bellcrank, and the Putnam ones won't work on a older car because they have a fore/aft
hole system for ackerman & bump steer that will connect with...
just wondering what is the toe-in angle on the rc10 rear arm mounts? ive read references to 3deg,1.5deg and 0deg in other threads and am wondering what is the kit standard.or is it the outer hub that changes? :?
Here is some pics of my shelf queen. I have owned her from new. To give you a little history, My mom and dad bought the car when I was a kid and built it, we ran it very little. It was never raced and has spent most of its life in boxes. It is and...
Last post
You say the 80's had one hit music??? Have you listened to music lately?? :lol:
here my vintage A chassis rc 10 that i bought from transamman about 5 months ago, it started as a just a resto but turned in to a runner. after taking it to my local outdoor 1/8th scale track, the faster bug has bitten me and after upgrading it i...
Last post
sounds like you're having big fun. Good for you!
Get someone to make some track-action pics for us , please.
I picked this car up from a friend, in a roundabout way I have bngiles to thank. Since he found it for the guy I got it from. It's nothing special right now, just a stock Team Car that hasn't been run very much. It's got a worlds car steering setup...
Last post
Very nice runner.
Its funny how bringing one of these oldies to the track will get the talk of vintage racing going.
Could you provide me more informations about this car.
The main chassis, fit a Losi Rear End and a AE front.
But I'm not sure about the year of this chassis, The right rear End was from the Pro or the Pro SE ?
Thanks for any strong help...
Last post
Iwant to be sure about the period, before or after the Pro SE ?
The chassis is from before both the pro and pro-se.
The ad below was taken from the january 1990 rc car action magazine(the year the JRX-2 won the car of the year award). The...
I have a sillyish question-I have an RC10T2 and I'm using my T4 a lot more,now.
I'd love to put a clean chassis on it (mine has a hole for a servo saver cut into it :roll: )-Would a 'B' stamped black RC10 chassis fit,or is the T2 chassis itself...
Last post
Rats...Thans,scr8p.
Guess I'll just have to keep an eye out for a new T2 chassis.
That truck is one of my fave's.Atom bomb proof!
Im looking at buying a body with 6164 part number.Ive never seen one before,can someone shed some light?
Last post
Ok,thanks heaps for letting me know.I think Ill give it a miss.The guy wants $50 AU for it on ebay Australia but Im not that keen on that type of sprint car.
First a little about me. I have been racing r/c cars for about 16 years. I started driving r/c cars at about 6 y/o, some of my ealiest memories are driving figure 8's with my dads old Tamiya Rough Rider. When I was 8 y/o, my dad got me a Kyosho...
I have an RC10 (of course) that I've been slowly restoring. The car I now have is made up from 2 complete cars plus a new mint chassis. One of the cars came with a clear body that some clown had decided to cut an extra hole in along with a bad...
Last post
Almost finished just need the right wing and some decals
Picked up a CE chassis that has been sitting for a while . I put a protech body and some electrics on it and some pargo rims that I pruchased . My question was the AB chassis the same as a B chassis . I have two CE chassis that are drilled for both...
weather was bad last couple of days so i finished off one of my pro tech bodies i had
lieing around for some time. it is one old skool paint job as i always do. ok some of you will think it's boring
but i simply don't like multi color paint jobs...
Last post
Looks great. It will look good sitting next to your Pennzoil GT too. 8)
Are the 6608 gear covers still available for the early RC10's like the 6 gear tranny & the Championship edition? I've been looking and can't find any. Have Associated changed the part number to a newer design that's backward compatible with early...
Last post
Jason, you must ask nicer than me, I got a point blank refusal to ship to the UK! Monster - can you let me know if you're happy to post on to the UK, if not I can jump in with the Oz lot and ask Jason to forward some. I'm after two covers, one type...
I'm on oOple.com, newish member there (same username) who has recently got into vintage RC's. In particular i liked the RC10's i been seeing. Some of the examples on there look amazing, the original 80's box art looks so cool, proper...
Last post
Beware of what you read on eBay, it's ok to ask here about the cars you see there. That is not a 1994 Worlds car
because it doesn't not have the special black chassis which had grooves milled in the bottom of the tub I suspect for
lightening...
I just finished up one of my current resto's. I started with a mint A chassis and some new tires.I used the speed control I recieved from scr8p I just had to find new wiring the soldering job isn't the best I need a hotter iron. I dyed most of the...
Last post
No they were a set of good used white ones I had . The only parts I didn,t dye are the battery cups and rear a arms those came from tower. All the other parts were either nip (trans case) or good used parts no slop, cracks, stripped out holes ect....
What is it?
and did they come pre painted or pre printed ?
Picked it up locally a while back, and going to sell it on, but would like to know what I am selling !
I am fairly sure the car is CE version though, right guys?
Last post
I've posted this pic before in another thread and I prefer this 1/8 Proline Baja body on a chassis thats extended by one inch.
I've searched through a few posts and found a lot of confusing info on what works and what doesnt. I'm a member on RCC and Scale4x4 so I know how to search for things, but am just utterly confused. I saw that in this post: there was a lot of info. I...
Last post
gula for the dynotech arms you need to run a rc10t front kickup and bulkhead. they will replicate the old rpm 'worlds' front end.
not only are the arms too wide for the traditional buggy kickup, but the space on the arms to mount to the bulkhead is...
My new project. I just picked-up this small lot over the weekend , it was listed for $50 on Craiglist. The buggy is in pretty good shape and just needs a good cleaning. Looks like the off-road tires were not used , also came with a wing and I...
Last post
Sway bar problem fixed with a paper clip , just have to order a body from Tower to finish the build. Time to put the foams and bumper back on and take a spin :D
Users browsing this forum: Amazon [Bot], Facebook [Bot] and 39 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum