RC10Talk - The Net's Largest Vintage R/C Community

I've got an old six gear transmission that I wanted to run in an older gold pan. It is almost all there but missing the spur gear and diff balls. I've got an 83 tooth 48 pitch spur gear from Associated/. Can I use a regular Team Associated spur that...

Do the Jconcept rulux wheels have a pin or hex drive for say, a B4, and B44?

can anyone take a quick offset measurement on the b4 rear and/or b44 front wheel?

thanks in advance!

Well, i have some Andy's parts and want to know what all came w/ the conversion, and if someone has a pic of individual oarts, post them up :!: :!: :P

hi ive just finished my worlds car all new built and also a fluro green tub(almost) hope ya's like them.

So I fully remember back in the day when guys took their gold pans and cut all kinds of holes in them to reduce weight. I had a buddy who raced a lot and I watched him do it. Thank god I wasn't much of racer so I never vandalized my gold pan in that...

I Know there was some talk of this some time back. I am trying to get to the VONATS this year, hopefully work and everything else ($$) works out.

I'm going to build this Team Car just like I built my team car in 93 ( a little less dremil maybe, I...

hi all,

going to order a pair of nose brace for a RC10 tub chassis from towerhobbies and while I was there I thought to get some other spares as well to make the shipping cost worthwhile (non-US resident).
Here's the list...

LX2774 Associated Team...

Ok, here is my labor of a year-- aaa 6010 001.jpg My nicer gold pans, left to right-new built 6016, new built 6010, restored 6016-I like the color change as the production went on aaa 6036 001.jpg Three of my graphite cars L-R, 6036, 6030 box art,...

Howdy guys. New to the site, but not new to RC. Just came across this forum a couple days ago, and having been a big RC10 fan my whole life it seems lol I figured I should sign up and get involved in the goings on here. Just this past friday I made...

I dont have any RC10's anymore, I have seen the Light Losi has my heart now. please dont hold this against me their has to be a good and bad side. either way I have my original RC10 manual , I wish I had the car still it was a early one with...

HELLO I thought I would share something that I have change. I took my RC 10 pan that I was useing as my oval car. I was able to fine parts to do full oval change over. THE only problem I have is I dont have the track to try it on and we now have our...

I have alot of RC10's they are my favorite. Here in dearborn at hemlock park I have seen a group of guys running some tamiya buggies. They just bash the hell out of them . I am not a basher but looked like alot of fun to take a car and try to...

I've been cruising all over this site as well as a few others, and I don't see many gold pans with the old wiper arm speed control. I know even back in the day they were worthless right out of the box. Most everyone I knew put an aftermarket...

I dusted off my old 1990 RC10 graphite sprint car with the Kyosho sideways cage and made a few updates and ran it at two local tracks in the St. Louis area in the modified sprint class. I put wide front CW axles and castor blocks on it and some...

this is my runner i havent used it yet because most of the tracks in the uk are on polished floor and a bit off carpet its like raceing on ice .

Picked this car up a few weeks ago off eBay. The overall condition looked promising. When I received the car it was 100% intact and in good shape. The car was covered in leaking shock oil, dust, and rust. The tires were unused but marred with old CA...

Any pictures of a box art TQ10 out there?

I recently decided to re-build an RC-10 to what I once used to own.
What I had though wasn't a simple gold pan but a fully tricked out graphite (D&D) chassis, A&L arms rear, Andy's front, graphite towers, MIP gearbox (pre-stealth), fully polished...

I rarely get a chance to post up my builds. Mostly due to my parts being in storage and my wife not wanting to share me with my builds. Here we go. Here is my version of an Old but Newer car.

I was fortunate to find this car at a local hobby shop....

Guys, I have some old front RC10 rims that are painted. I want to strip the paint and dye them. What can I use to strip the paint that won't hurt the nylon? Any suggestions?

Thanks

Matt

Hi all. :)

After seeing slotcarrod´s thread about his B2 runner I did feel an urge to (try) re-build mine which obviously was a mix between a B2 and a B3.
Have been trying to suck in as much info as possible about the B2 and this is todays stand,...

I was not going to build it but I had the parts laying around so I decided to get started on it not complete yet but I am working on it

hi im a new guy on the fourm been reading posts here for a while posted my fleet in the off topic chat section so i though i would post my 6 gear rc10 with original ae blue tube i bought from ae back when they were on there clearance web site along...

My old great carpet racer.

//U.p

hope these q's aint to boring for ya's :roll:

1. when did black nylon parts come out? year?
2. when were titanium coated shock shafts released
3. were universals out for the rc10 in 92
4. when did cvd's come out
5. worlds car manual shows dog...

Hi everyone,

So I just moved across the country from Massachusetts to Oregon. While we were packing up the house back east, I ran across my old RC-10 and decided to throw it on the moving truck figuring I'd give it to my boys someday. So here we...

Anyone know what body tis this? :)

OddBod1.jpg
OddBod2.jpg

.........being deeply poisoned by this site for a long time..........& after getting a gold tub, A&L conversion not long ago........my next target is the graphite tub...........:)

lucky enough to get one in the bay at a reasonable price...

Hello everyone. I'm new here, but not new to Rc10s. I bought a world's car when they first came out years ago, and later sold it.The one i have now was a basket case when i bought it over 10 years ago.It was literally in pieces in a box, but I only...

i know this is a long shot but has anyone got setups for a rc10 team/worlds on grass or carpet?

Hello all. I was wondering if anyone knew of any online retailers that still stock parts for the 2.25 stealth tranny? I looked at another post on this forum that had some links to Tower Hobbies and I searched tower but to no avail.

If there's...

as the title says what are the advantages.have noticed alot of guys running them on there old is new cars and was considering whether or not to get one for mine(in progress),any insight would be great :D

look at these neat trinity traid tires that i got off the bay !! 2.2 just what i wanted!!!! yay

i am going to compile a massive rc10 website/blog.. basically a all in one spot to go to look up bearing sizes, turnbuckle lengths, bearing sizes, part numbers, part availability, etc etc etc.

What i need everyone's help with is ANY and all...

Can anyone tell me if the rear carrier\axle bearings are still available from associated in the stock gold pan size? What are the measurements? MIP still makes cvd's for the stock length arms(i think) so I'm going to grab a set and would like to...

traded a box of parts for this. realy dont know what im gonna do with it, so its in the BST section!! it has a kyosho frame, and rc10 a arms, and stealth trans. plastic nerf bars. i think i seen this chassy on a older kysoho sprint car from back in...

can someone tell me when these chassis where released? thanks

Does anyone still sell the original small rear wing? or does anyone repop them?
Tower has only the larger 6 inch rear wings and other stores the same.
Thanks
Qball

Does anyone know what this is?

Template for 6 gear to stealth 2.25 conversion?

Hi all

I'm back here again after regretably selling my worlds RC10 last year. I have just aquired an old 6 gear. Whats diff parts and gearbox parts like to get hold of nowadays as I'd like to give it a decent rebuild?

Thanks
TJF

alright guys an gals here is the start of my newest build.. my version of the old but new twist,
i like to call it ..... XXthe modern maniacXX The Purple People Eater

this would have been my Vnats rig but cash flow fell short.. getting from the...

OK Can one of you tell me if there is gear change between the Buggie and RC 10 Truck trannys. Would I see a difference in gearing. If I put a truck stelth into an RC 10 Gold pan?

I have taken THE Top shaft compleat out of a T 4 counted the number...

I just bought a black tub RC10 buggy from tbfoto in the BST section. It has some greenish blue nylon parts. What's the story with these? When I got out of the hobby in the 90's, they still had white parts. How long were they in kits?

I just about went crazy trying to find parts for my Yokomo MR-4BXF,so after managing to sell it on for enough dough to buy a new B44 FT kit,that's just what I did.
It's running a new Mamba Max,a new Orion 7500kv brushless motor,a 5000mah 20C LI-PO...

I've recently got bittern by the RC10 bug & brought from Ebay.US a very nice original RC10, which I think has only been run perhaps once or twice, judging by the minimal scratching on the chassis. The car came with the box, instructions (including a...

got this from redscampi. along with another goldpan and red one. this one is a A stamp tub, i had built it up half way, decided to put on black andys a arms from another car. didnt like it so i built it up with all white nylon,and front wide track...

anyone knows the timeline starting from the 1st generation RC10 till B4 ??........

many thanks !!........:)

found this kit at a estate sale . It is all there but the body,wing,decals, driver and intructoins. It even has a parma reverse switch and bearing kit. I have a used body from racer8838 for it. I was just out for a ride on my mountain bike and came...

HELLO This is Don. THE Rustbucket.
I have a question that someone may be able to help with. I am changing my RC 10 gold pan with the stelth over to brushless. I have a 87 tooth spure, Also setting it up with a 17 .5 novak any add vice on pinions....