This is a tribute to the great line of RC10 buggies produced since 1984-2009 (RC10 - RC10B4). This is a work in progress. It will take some time and help from fellow members, as we all learn new things about the different versions. So please be...
Last post
Question I haven't found a firm answer for... it seems some RC10's have much whiter Nylon than others. I'm not talking about dirt or oxidation/aging etc.. just simply as they came some cars had much whiter nylon. I know this because I was fortunate...
I just picked these bodies and rims up over the weekend at my local lhs. I am interest in building up the sprinter , it appears the exhaust and lower cage are molded already. Does it reguire a cage to complete the build and also how is the wing...
Last post
Just my opinion here but masking them then spraying would probually be best. I used to brush mine and if you are good enough you can do that. How ever it is best to spray it. Keep us posted on the progress man.
An another busted part. Man when will it ever end. Ok so here we go from the top just to get you guys updated. As you may recall I have a dirt oval rc10 buggy that I have been trying to get ready for saturdays race at the lhs. Any how I got a bolink...
Last post
oopppssss maybe this will help. Sorry about the pics being so big only way I could get them to go.
and its another fleebay special! this car will be modded over time. but i think its off to a good start. my wife asked the other day as we were talking about what we were going to change out on the car, Wouldn't it be cheaper to just buy a B4?...
Last post
Just make sure you got he weight in the right places: as low as possible and in the suspended, non rotating parts. And if possible well balanced. Otherwise that little bit extra weight might make things tuffer to drive
My NIP Associated chrome rims arrived today.
I sure wish I had a pair of fronts to match! :( And some new tires!!!
I have an extra set of NIP rears,if anyone wants them,or has some fronts to trade.
Love the look of them!
Might have to just get my...
Last post
Thanks man! :D
I laid down a few coats of Tamiya PS-17 Metallic Green,backed it with Tamiya PS-13 Gold,then backed everything with Tamiya PS-1 White.
The green really shimmers in the sun and gives it a nice depth under soft light.
Finally getting around to building this project. This is a buggy I have been wanting to build for awhile but other projects kept getting in the way. Base for this project is a nip A&L trailing arm conversion/ fiberglass chassis kit. I had a new...
Hello, I just stumbled across this forum. What a great place for all these vintage racers. I am just finishing off a couple of projects that I have been thinking about for a long time. Here is my 4wd RC10. Pretty basic build. I took a new built RC10...
Last post
It was an ebay auction from awhile back and I'm not sure who it was. I have been sourcing parts for the last year in order to finish or start builds and things are kind of a mess right now. If I run across another set I will let you know.
Ok fella's don't give me to hard of a time I am building my first Rc10 in 20 years. and I am not starting with much? this will be long and drawn out because of lack of funding. and waiting on parts? I have 2 chassis Not sure what one I am going to...
Last post
Yikes, those aren't the ones you got from me I hope! If so, I will make it right. If not, let me know what you need and I will get it for you anyway.
By the way, that body is going to look cool on there!
Greetings everyone. First time post for me. I would like to find a set of schumacher street GT style tires, (or something better) to fit on my sees aluminum wheels for my gold pan rc10. I think they are 2.1 size and although the front and rear...
Last post
my pleasure
show us some pics with the new footwear
I just found out that my gf of 4 years has a 6 gear gold chassis rc10 stashed in the back of her mom's shed. Her dad bought it new for her many years ago and it's in good shape still, just needs cleaned up. I need a wing/wire and them sweet old...
Last post
Very nice score indeed! Bonus on the extra shells too. The one closest to the buggy looks like a Jammin' Jumper and the further one possibly a Hot Bodies Stealth Fighter?
Either way both of them are very cool, not to mention the the lid already on...
Does anyone have or know of a place to get a template for drilling a gold pan for a stealth trans? Anybody have a rental :lol: .
I don't have the funds to buy a drilled chassis right now and it's the last thing I need to do to get the racer ready. I...
Last post
Thanks Jeff. The paper one worked out fine.
Thanks anyway.
I had this car that I got off ebag as an impulse buy. since i've been collecting Losi's like a madman lately I decided to let my wallet cool off and try to make something out of this car. My ground rules I set for myself were that I had to build it...
Last post
Thanks guys. I had to be selective about the photos I posted because I made the mistake of putting the silver down before I decided to paint the sides red. I had some red speckles in the silver in a few places. Rookie mistake. :oops: Good thinking...
I am back to rc after more than 10 years.
At this time, I rebuilt my RC10 graphite what was my first racing model (quite finished).
I wanted to sell my B2 witch is in godd shape, but it's market value seems to be lower than the tam grasshopper!!!!...
Last post
sorry i don't live in france.. LOL but to answer your question on the B2, YES it can handle whatever motor and battery combo you can throw at it. i have one that started with a 27T, then i put a 19T, 17T and now a 10.5 Brushless. the 10.5 is...
After a bit of indecision and looking at god knows how many Protech bodied RC10's I arrived at this!
I'm a happy chappy. :D
I'm waiting for a decal lot I won on eBay with plenty of old school A/RC10 decals included,before I add any more,no past...
Last post
I love all of them !!!!!!!!!!!!!!!!
...ain't it the truth! I too am an addict. I can't help myself. :mrgreen: :oops: :shock: :wink:
Oh, and thanks FasterLouder for the compliment on my avatar car. That paint job was done in about 2 hours total...
HELLO all.
Can any one out there tell me what wheels can I use to up date an RC 10 buggy so I can use the newer tires.??
Dose any body have any ideas or answers? I could use the help on this one. I have a stock RC 10 GOLD PAN . I cant fine tires...
Last post
HELLO to all of you on this board.
I want to say thankyou for your help and support on this problem. I new sooner or later I wouild get the answers I was looking for, With this information it will help me as well as my RC 10 Vintage drivers.
I...
I recently got my old gold pan running. I'm using a 15T brushed motor and a 7 cell battery. Under hard acceleration the cluth slips. Any ideas? I have tightened the nut as much as the e-clip could handle. I freshened up the trans with new idler...
Last post
I replaced the top shaft assembly with one that had the stock washers in place. It works much better. I'm not slipping anymore. Still have some more testing to due but I broke a turnbuckle running this evening and left it for now.
Hi guys, my name is Jim, and I'm new here, with a couple rc10 questions. A few years ago, my grandfather gave me a couple r/c cars, which I just found out (thanks to this site) one of them is an old rc10 with an A stamped into the chassis. I want to...
Last post
i have one of the older laniakea bamboo series sector 9 boards .its cool.my fav board is my comet. its an old school shape 36 inchs long and a little less then 9.5 inches wide and made with fiberglass i reall like the different and oldschool reissue...
Re-found my only vintage RC10 today :D I was told this is a Worlds '91 car?? It's in good working condition but terrible for a shelfer. Over the last 5 years I've collected various parts to start restoring it, including NIP replacement...
Last post
Cheers for the help guys. Think I'll run it for a bit as it is, then try and find some good nick used white arms & shelf it - it'll never be mint but I'd like it to be 100% original spec.
HELLO This is the Rustbucket, I have had this question come to me many times dealiing with the RC 10 buggies.
Maybe some one of you can answer this question, I dont know the buggie all that much, I know the RC 10 T trucks for the most part and...
Last post
OK what I ment to say what wheels and tires can I use on a stock RC 10 gold pan to up date so I can use the new wheels and tires for a gold pan buggie. Do I need to change anything to go to up date wheels and tires. I have no idea on what can be...
Here's My RC10 Racer Project. It Has a Traxxas 20 Turn Stinger Motor, a Duratrax Sprint 2 ESC, and a Vintage Futaba Radio (original).Its in Pretty Good Condition Other Than A Piece Of **** Body. It Has Bean In The Family For Years. My Dad Bought It...
I finally won an auction for a set of new in packet chrome OG RC10 wheels for my RC10 build and I just found out I got two sets of rears!
NOT HAPPY!!! :( My fault-I should have actually read the description of them closer :oops:
Anyone have a pair...
After a little body refurbishment I can call this one finished, I hope you all like :D
Last post
Peuge,
there are many different types of paint used on RC cars. Fuel will work for some paints, not for others. It really depends on what type of solvent is used with the paint.
Good examples:
- some newer paints for nitro cars specifically say...
I have been working the past couple of weeks off and on cleaning up and repairing an RC10 that my brother-in-law had originally gotten in the mid 80's. It was in pieces in boxes in his attic, but luckily most all the parts were there. I ordered a...
I know some think that BBT only had 2 different styles of sprint car chassis which I also thought to be true but when I started this build I noticed some differences with this buil here and my other bbt sprint and come to find out that bbt actually...
Last post
I miss racing at Ascot/RCRC....it was a blast. Wish I had the JRX2 set up. Your build looks like it is coming along very well.
I am looking at getting an RC 10 off the bay this weekend (I don't have access yet to BST).
I am looking for a gold tub with the correct suspension arms on it. But if I find one that has a stealth tranny in it already would that be a plus or a...
What should I look specifically when purchasing this chassis/rc? I know majority of the parts are available still from a bit of work done on my RC10 WE Black Tub but is there anything I should look for in the graphite variant? I know I may need to...
I AM LOOKING FOR A B3 ALUMINUM TRANS CASE - WAS THERE EVER ONE MADE BY SOMBODY, SOME PLACE ,SOME WHERE - I HAVE BEEN SEARCHING FOR A FEW MONTHE AND NO RESULTS - SO I VENTURED IN HERE TO TRY MY LUCK - ANY INFO WOULD BE AWESOME
THANKS
Last post
I AM A MEMBER OF DIRTOVAL.COM - POSTED IT ON THERE AND NO ONE KNOWS WHERE TO GET ONE OR IF ONE WAS EVER MADE - I HAVE A BRAND NEW STEALTH TRANS IN THE BOX FOR A B2 B3 PART NUMBER 9350 - SO I GUESS THE B2 TRANS IS THE SAME - THE NEVERENDING SEARCH...
What shock tower can I use the RPM rear bulkhead? It looks like a 10GT will work but I think its going to be to tall for a buggy and a body will not fit. Its for a RPM ulta Buggy.
Thanks
Last post
If you're doing a truck you use a normal 10T rear tower, use the bulkhead as a template for the upper holes, marking them with a small nail.
I was wondering what parts interchange w/ rc10 parts that I might be able to get in Korea.
Last post
there were some big shops at 90's. I'll check and update soon
EDIT:
I found 3. you need to get help from your hotel concierge. I don't think the showkeepers can speak english
051 is the area code. you don't need to push it actually at pusan
I was...
It only took me 20 years of wanting one! :shock:
I won an eBay auction on a Champ Edition,with a gold pan parts car,but the seller then informed me that he wouldn't post out of the US..Greeeat.
So,I dived in again and came up with this sucker for a...
Last post
think that's a dahm's warrior. I have one on my losi/traxxas hybrid, I'll try and snap a pic sometime to see how close it is....
I got these two from japan yesterday. and, it reminds me this tread
the left one is a Mirage SS, and the right one is a Turbo Mirage w/o scoop
DSCF4887.JPG
here goes some more pics. those two are slightly different from each other. the Mirage...
I have been primarily building oval cars recently but, I wanted to build an off road car!! Last nite I took my Rayborn oval car apart and built this!! It has RPM front and rear a-arms, ball bearing steering, and ball cups. CVD's, rebuilt Stealth,...
Last post
The ball bearing steering is sturdier, and less slop. I would highly recommend it! I've seen RPM, and MIP BB steering set ups on eBay for around $20 anyone try these $17+$5shipping (i like buy it now stuff) (anyone know why theres 4 metal pieces...
When I was a young racer I would build carpet and dirt oval cars all the time. I recently revisited the good ol' days and built a few. The EDM car has a Kipps body, Speedy's shock towers, RPM ball bearing steering and rear body mount! It is the...
Last post
the upstairs oval has been gone for a couple years. they installed batting cages. :roll:
they did put a small road course layout on the remaining area that wasn't covered. but, they only run the 1/16-1/18 scale up there. i guess their getting...
Considering it has never run this poor car has been through the mill :roll: This project is a classic case of learning as you go :oops: here are a few pictures to show where it's been.
This is how I received it from Coxben, a very nice car indeed...
Last post
Thanks for the comments, I'm very happy with how it's turned out.
Yes Scr8p I'm pretty sure it's a HB Stealth Fighter.
Just thought I'd share pictures of one of my cars. I'm working on the wing and waiting for decent weather to paint this buggy that I reassembled over the last few weeks. I'll be hunting for some nicer rear tires soon as well.
what are good gear sets for the RC10. I'll have to get stuff from local hobby shop here in Korea, just wondering what pitch and tooth are good for the rc10. thanks
Last post
sorry about that, yea I guess more info would be helpfull :oops: it's an A stamp car with the 6 gear tranny with 19T mod motor that I plan on just driving around. No place to race here in Korea that I have found yet
New here and was just curious about what is the deal with the shocks that have bleed off's on top with tube running between them? I got a set on an ebay buy and haven't seen anyone else with those types. It is an A stamp chassis w/Andy front and...
Last post
The B car is in worst shape than the older one, but has all white parts. No other reason really
wasnt someone selling/making a L shaped bracket made out of carbon to mount the esc to the shock tower for the rc10's.... was it on evilbay?? i cant remember where i saw it.......
I have yet to see any RAYBORN builds yet.I have an lto chassis with the rayborn rearend on it.Did they make any frontend parts from that company?Don 8)
Last post
It looks like a strange mix between RC10 on road and off road cars...
I had personally a raborn telescoping axle kit for my RC10 buggy. It was very unusual in france. The arms were very strong, but the axles gots worn very fast.
It was a great help...
Probably a stupid question, but where can I find a body (unpainted or painted)?
Last post
I believe any RC10 pan body will fit. IIRC, the only difference with the world chassis from the goldpan/blackpan is that it was milled. Still the same basic shape.
I have a worlds car and run a Viper body and a Protech II body on it. I still have...
Lookin to spend no more that $160 for a brushless system for a RC10 rebuild. I was lookin at Novaks and the Traxxas VXL. What do you think?
Last post
All Novaks are good for is putting on a smoke show for the spectators :lol:
Their motors are good though I run a 5.5t with Mamba Max.. I thought ROAR finally allowed sensorless?
If you don't wanna go completely nuts with 2.5t motors a Hobbywing...
Hello All, new member checking in... here are two pictures of the RC10...
Last post
chamberlain, are you the chamberlain that took first place at the 89 roar off road nats in 2wd stock? i was looking through some old rcca's and happened to notice it. just thought i'd ask. :wink:
Users browsing this forum: Ahrefs [Bot], DotNetDotCom.org [Bot], Google [Bot] and 29 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum