Recently picked this 10T up… Am I correct in thinking that this is one of the last runs of the original 10T design? Chassis is a C stamp and has all black parts as you can see.
Last post
That high of ratio ehh? I was thinking around 21-22t. It’s. Reedy radon 15t motor
The original 10T has a 2.25:1 transmission ratio, while newer trucks have 2.4 or 2.6 ratios. So you can't directly compare the pinion size to that of newer trucks....
I can't seem to get an answer from JConcepts so I thought I would ask here. I bought the JConcepts RC10GT Authentic Body - 6131 and I did not realize it did not come with decals, and my question is what decals are supposed to be used with this...
Last post
Hi
Thanks, I was looking at the MCI decals before posting but didn't know for sure if those were the ones I would need. As for the other body I'm planing on getting would I need to get the MCI 1/10TH ASSOCIAT - RC10 T3 / GT3 DECALS?
Composite Craft #10210 RC10T Pro Mod Double Decker Set. This is the version of the chassis I have wanted for a long time. I love the lines of the lower deck, and upper deck, which extends all the way forward and mounts with a custom brace. I feel...
Last post
I would also wote for the green shocks. The black shocks are nice, but I think you're losing more of the identiy of the car. Also, all of a sudden the entire setup turned very modern with the black ones.
Green looks fantastic, stealthy and...
See post #43 for current pictures. All other pictures lost…..
Going to base this off of what someone would have built in the beginning of the nitro craze before conversion kits were available. Only sacrifice to original parts will be a used...
Last post
Skinny tires and cut windows. Now it needs a windshield banner to cover up the scratch I made.
Does anyone still make 2.2 aggressive knobby ST tires? I'm looking for something similar to the old Tracktagators, I'm not having any luck finding any descant big knobby tires.
Last post
I remember seeing the TracTaGators in the catalogs back in the day, and how ridiculous they were to me even as a kid. :lol: Never forgot the name though!
It looks like there was a broken aluminum screw that broke and someone tried to remove. Unfortunately it looks like someone tried to drill it out but the screw is partially there. For the hole i was thinking a out trying a 4-40 heat insert but...
Last post
z4TVnbuy4Lw
Wow! I wonder if it would cause any issues with residue if I put a steel screw back into the hole after? There must be some sort of neutralizer that can be put on it after.
Far as I know it's only ally that gets eaten, it's on the...
Hey guys, as im going through parts i noticed in the team truck manual the 3 degree rear suspension mounts were shaped lime this:
20230215_174016.jpg
But ive also seen them as a 3 degree optiin with tbis shape:
20230215_174030.jpg
Has...
Last post
Also found a variation when i bought a single universal to replace a bemt one that I had. The newer universals at the end of production on the team truck didnt use that collar at the end where the joint of the dogbone/axle is. Picture attached....
This started as a very inexpensive purchase. I decided to keep it that way but not investing a ton of parts.
C4BE3B34-E66E-4143-A597-D522A4F273D7.jpeg 9EBA2E36-4520-4BF4-80F7-22FABCEAE90E.jpeg
It was a challenging disassemble. There was a lot of...
I have a RC10GT and I need to get replacement front axle nuts but the manual is not clear on the size I need to get. I can't find them locally so I have to order them, so are they 6-40 or 5-40, the manual shows both as the size.
Last post
And don't over-tighten them. The threaded section will snap off.
I have shared some photos of this in another thread years ago, but since then I've done more work to it. This is my RC10GT blue chassis I bought new like 20 years ago.
I converted it to a mid-motor, transverse battery electric
The motor bolts to...
Last post
Hi
Thanks for posting that chart I was looking for something like that. I'm also building a E-GT and almost done, just need some electrics and to paint the body.
First off let me be clear. This is not mine. It could be. It may not be, but before it may quietly go into the rc abyss I figured I should get the pictures and question up. 07D367C1-490E-413C-9387-8FF502D8DED1.jpeg...
Last post
Yea now that you mention it, it looks like everything up front is closer together on the worlds style lower…
This build is starting with a nearly new FT T3. I placed a half assed bid on eBay, and won. I was surprised, and actually a little mad at myself for buying it. When it showed up, I didn't even open it for a couple of days. However once I did I...
Last post
I figured since the FT turnbuckles were asked about, this would be a good place for this 8) 8F67CC06-6EEE-4EB2-88B9-E454C35401A2.jpeg
382DC00E-DCA5-446B-8491-DA59FC32D57C.jpeg 50FC9EFE-0C06-4362-BF9D-C272E469498E.jpeg 30601915-3351-4C9E-BC80-7C5D95311162.jpeg F5B2EFD3-9AF3-491B-BE4E-869100C4800C.jpeg 98195991-E654-4F73-8EDA-5FAE4C67217E.jpeg
Finally had the chance to check this...
Last post
RPM didn't have a truck bulkhead that accepted nose tubes. The one you have is it, so ultra molded or carbon chassis is about it.
This is a GT I found in Switzerland of all places!
It was up for auction on a classifieds page for a low starting price and nobody was bidding on it :shock:
So I thought I‘ll just quickly sign up and put in a bid.
But it wasn’t that easy…
To sign...
Last post
…
I also deanodized and polished the stinger pipe because I didn’t care for the purple. Not sure if everyone is going to like it, but I sure do. 8)
Just saw a stinger kit sell for almost 100 bucks on eBay :shock:
I have been in RC for a long time and only have for the love of the hobby. I knew I had a couple of old car/truck stored but haven't had a reason to get them out because I run the modern ones. I came across the RC10 DS I got for one of my sons back...
Last post
Its awesome that you are looking to update a very very cool car, the RC10DS.
Ive restored three electric DS cars with Castle Creation's Sidewinder 3 brushless motor/esc combo units and was totally happy with performance.
Spent some time at jwscab's house yesterday. My wife's car was at the dealership for service and it's real close to his place. On the way home I decided to swing in to the hobby shop in side a farmers market to see the owner. I've known him since I...
My RC10GT brushless conversion still has the original slipper. The spur gear is kind of wobbly as the assembly doesn't sit perfectly against the split pin, and the clutch is a very narrow thin ring around the perimeter of the clutch pad with very...
Last post
If she takes a #6585 slipper you can use one of my Carbon Slipper pads bud.
As the title says, I'm looking for the RC10T kit #7035 manual. PDF copy is good. Please let me know if you have one available or know where to find it. I've had no luck with google.
Cheers
Last post
here is the parts list..
and the manual...
sorry, I dont have any of the 20 or so supplement papers that went along with the manual. As mentioned above, things changed almost by the month
Thanks for posting this! I have been looking all...
Just what I need another GT. I’m going to keep this one very basic, very simple. Under all the grime I could see this is actually not a bad truck. And to the chassis and engine mounts credit, I had a little hand in the breakage. The chassis had a...
Last post
I would love it if they did another run of those! 8)
I recently picked this up from a FB post after wanting a 10T since the 90's. Plan is to go through it and get it running on modern electronics.
z_IMG_3343.png z_IMG_3344.png z_IMG_3348.png
It looks like an RTR to me that someone has been...
Last post
front bumper looks rpm sc10t-ish...or traxxas rpm slash. picture really isn't good enough for me to see it straight on so its guessing.
Does the tire choice change as the dampness of a track changes?
I’m looking to run a race tomorrow and it’s actually lightly raining here. I know they wet the track before races but I would expect that it would be much more damp in the morning and...
Last post
Holeshots will work on about 90% of tracks so they are a good tire to bring, they may not be the fastest tire but they work well.
The flipout is a good tire when traction is low and the holeshot doesn't have enough grip. When traction improves the...
I am in the rare position of having time to go to a track, a working car and a race to go to.
I'm going to take my rc10t to Hotrod Hobbies this Saturday and race. It's an outdoor dirt track. I have no idea what the surface will be like.
right now...
Last post
Since you already have #2 pistons in the front/rear maybe bring a #1 piston rear with 30 - 32wt and a #3 front with 30 - 32wt for some quick tuning options.
Can anyone shed some light on these clutch springs? I have only ever seen two, maybe three in total. They are bent too nice to be home made and I have never seen literature anywhere about them. None of my manuals show them.
Last post
Purchased another truck, as I’m cleaning out the box and putting all the little loose things floating in the box into a baggie. I noticed something most would overlook. Yep, that’s the factory clutch spring laying there. I looked in the manual and...
So, is it impossible these days to find tires for the old 3-piece wheels? Starting to realize from threads that most modern tires apparently don’t work. Was hoping I wasn’t going to have to convert my 10t over to 3/16, but is that the only or best...
Last post
So, is it impossible these days to find tires for the old 3-piece wheels? Starting to realize from threads that most modern tires apparently don’t work. Was hoping I wasn’t going to have to convert my 10t over to 3/16, but is that the only or best...
I am finishing up the details on my rc10 build based off a specific setup.
setup_ChrisVanAir_RC10T
The sheet specifies 0degree hubs, but doesn't mention what mounts were used. Looking at the 7001 manual the truck shipped with 1 1/2 degree mounts...
Last post
Look at the rear hubs from the top down view, you can see the angle change at the hub. The other hub that has a similar design has zero degrees. so you can easily see the difference.
On the rear arm mount, the 3 degree has two different newer style...
I planed on doing a simple rebuild with a new engine and modern electronics. This is my second r/c from when I was 17 so it was in storage since about 2000. I bought it as a new roller off a neighbor kid. I put my Traxxas Pro .15 in it that I took...
Last post
Here's some renderings of the bigger parts I designed.
My builds are going out of sequence. My 6 yo kid had enough fun with my team at build and asked to build a truck. I just happened to have the parts from an eBay find washed and hydrated. I was going to finish my team car first but, I wanted to jump...
Last post
So in getting more details on the build. The decals were originally printed by Complex Ink. The chassis protector is going to be a challenge. It was from Scvrc which is now closed. Apparently the dog was called carter and winners of club races...
Even though this is technically a buggy, I'm doing a truck conversion with it.
The plan is to build as much of it from my parts/junk boxes as possible. Of what you see here, the transmission ($40 parts trans)and rear control arms are the only...
Last post
Lookin' good! At first I thought this was gonna be a straight 10T build but it's more of an old school conversion! I fondly remember the truck conversion wars from bitd. I snapped up an Eagle right when they came out. Looking back on it now, all it...
With many thanks to Todd I picked this up a little while ago off ebay. From the photos it looked pretty tidy but when it arrived it was actually a bit rough. I don’t think it was used a whole lot but it appears that it had a pretty hard life in that...
Last post
The T2 got a bit of a workout today and man was it fun, the size of the park was unreal. Traction was very low on the polished concrete and the truck was sliding around a lot, but everything flowed excellently. Please excuse the crappy video capture...
I am not sure why but I was compelled to get an rc10t2. I managed to be offered one at a darn reasonable price so I picked it up.
I spent the afternoon fitting it up.
So far I have 12mm front hexes on the b4 25degree caster blocks and some t5m big...
Last post
So the new gears came today.
54 tooth spur and a 13t pinion. I also added got the proper 3/16 4-40 bhcs for the spur hold down. I was thinking that maybe at high speeds the spur could wobble.
I'm pretty happy with the proTek pinion packaging . It...
I just received this GT in the mail.
It has nitro grime all over it and 20 year old duct tape, but I can tell its in good shape underneath.
Ill post pics of the restoration as I go.
I'll disassemble it, right down to each screw, clean each part...
Last post
This one turned out great. Almost makes me want to clean up my hpi hellfire. Good job
Been collecting parts for the past couple months to build a Factory Team T4 from scratch. Finally got all the parts, hardware and whatnot, so the logical thing to do before I start slapping it together is to down a few captains and create a build...
Has anyone done a mid motor conversion on the T or T2? I couldn't find a thread.
Last post
Very true. If you were keeping it a truck, it's a matter of a dynotech motor plate, some battery trays of some type, and some creative bracing and you are on the way.
thanks to daryl lane for this very special opportunite to buy this truck/chassis from him. its a custom a&l team truck which this is #5 of 5 made. here is some info about his truck:
These are some pictures of a every dirty A&L Custom Team Truck...
Last post
These old Trucks are so much cooler than any of the modern stuff.
The RC10T2, one of the rarest Team Associated vehicles in the line-up, now has some option parts. JConcepts is spot on with the release of a Carbon Fiber option for the rear shock tower....
Last post
Those are nice looking, VintageRC on EBay sells 3mm Carbon towers also.
Hey all, welcome to my A&L Team Truck builds, I wasn't sure where to put this but since #5 of 5 is here I thought I would keep them in the same area. The trucks are #2 of 5 and what I’m guessing is #1 of 5. This is a special one for me, I’ll be...
Last post
Took another look at the extra chassis last night and it is NOT the same as the numbered versions. It isn't drilled for the upper deck stiffener and when I overlaid the upper deck onto the lower, the holes needed break into the skeletonized pockets...
So this is my hot trick, proline truck conversion with vintage mip trans with hot trick trans brace a mcallister dakota t truck body and trinity monster motor. WOW WHAT A MOUTH FULL!!! lol! IMG_7159.jpg IMG_7160.jpg IMG_7161.jpg
Last post
well its done. IMG_7183.jpg IMG_7185.jpg IMG_7182.jpg IMG_7184.jpg
I am rebuilding the trans on my rc10t...the bushings wiped all the shafts out...i decided to upgrade to the rpm 2.65 and avid bearings. I am trying to locate the stock 6577 and 6578 outdrives for the diff but I find that very little are available...
From the outside it's a throwback to his truck but this one runs dual Lethal Weapons with off the shelf components instead of the hand built chain drive single motor setup. I also went with buggy components and...
Last post
Hey MachV, did you ever get this thing going? May need to get the trucks together for a photo shoot sometime.
Hey Adam, never did get it going but maybe one day!
It looks like there were 3 versions of shocks that came with this truck:
Gold - Basis & Sport Kits
Hard anodized, PTFE coated gray - Team & Factory Team Kits
Blue - RTR Kit
Does anyone know if there are differences in these shocks outside of the...
Last post
I just use a shock shaft with a downstop limiter under the piston and pull it. I'll normally go back with a nut driver or similar tool to make sure it is seated properly.
Related topic, what's the current easiest way then to get 3/16 stub axles in rear with pin drive? All mine are dogbones stock 1/4 axles. I know JC racing will be out shortly with 3/16 universals and solve the problem but what else for now?
I saw this RC10t on ebay for a price that seems about right to turn it into parts. wreck1.jpg s-l1600.jpg wreck3.jpg wreck4.jpg wreck5.jpg wreck6.jpg wreck7.jpg This truck looks like it was a white arm rc10t that was 'upgraded'
Some of the parts...
Last post
Things are starting to come together.
The chassis is is much better shape that it first appeared.
875DF3E1-6042-4517-9755-0A6A4CBB9E02.jpeg
After some deanodizing it appears nearly all the scratches were light. The tub was also really well cast...
Does anyone know if there are currently and CVD's (3/16 wheels) on the market that will fit a T3?
Will the Custom Works Medium kit fit?
Last post
As well welcome. when you get a chance It's be great to see your project in progress.
Thanks for the info and the welcome. I'll have to figure out how to post pictures. I have an RC10 A-Stamp and RC10L from when I was a kid and recently picked up...
Users browsing this forum: No registered users and 26 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
