So after a good weekend camping i found my new body blowing around in the yard (even though i stopped my mail :shock: :roll: ) so no damage done i have a few Qs did the body have the back cut out to match the original car and do any of you know if i...
Last post
So i did a trail ano strip tonight ,and man that is some tough ass red
I have striped alot of anno but this was hard work it ended up taking three try,s
First 15mins no efect then 20 mins a slight change but still red then an hour soak .i used...
I found one of these RC10L SS kits sitting on the shelf at a hobby shop and was wondering if they are still common to find in kit form. I remember when this car came out years ago but not sure when they stopped production. The same shop had a couple...
I decided to rebuild the shocks on a DS I picked up recently and didn't like the scratches on them. First stop was the manual for part #'s and then Tower which had it, #8845, in limited quantities so I ordered 4 and got the bounce back that only 2...
Last post
Put the gold shafts in front,makes it look nicer and the front tends to move up and down more than the rear.The rears you really cant see so who would notice the difference.DON
so i picked this up recently very intresting car the seller said TRC parma
the car is new there are a couple of faint lines on the under side but very intresting design
the see,s wheels look like someone put rears on the front and im haveing a...
Last post
thanks scr8p can you tell me if there was a brace on the top of the pod ?
Paul
it was a bent piece of kydex that served as a brace/body mount.
so i like the on road stuff speed is good 8)
i have kept my BIN finger in my pocket for good reasons ,but this i just had to have .
i will post some more pics when the posty drop it off
i also have a thing for the old gtp bodys so when this...
Last post
so the posty lefr this for me today
im pleased it only looks dirty ,all it will need is a good strip down and clean .
looks like a kyosho shock dont think i will change it just a rebuild
Paul
i have just finished a new build on a nds.looking for a body that will fit the chassis.tried several touring car bodies.just didn't really want one. i built this form the ds racer kit 8076,so it came without the body.if i can't find a body i like it...
Guys, i won 2 rc10l cars on the bay.........my narrow car is a graphite chassis..my wide 10L has a fiberglass chassis.....i want the fiberglass chassis to be black also........i dyed the t-plate and other small glass parts in my crock-pot black in...
Last post
i put a t cup of salt in a pan with the dye
lay some table knifes in the bottom to keep the parts of the direct heat .then rolling boil for about ten mins then simmer for an hour
then serve up with a sprig of parsley and some fresh black...
so i finally came into 2010 and got myself a touring /pan car i can get spares for.
i will run it narrow but will probably get the 235 conversion
and a bonus it came with a thunderpower 5000 lipo 1s
what ever that is :lol: i know its not a car...
Last post
Just FYI, if you wat to convert to 235mm, I would not recomend the CRC conversion, there is a conversion from europe, that replaces the lower pod plates, and you dont have to run the hub extensions (Which SUCK!!!!!!!!! - they add quite an unbalance...
I haven't seen too many DS's on the on road forum, so I thought I'd add one to the mix.
I've owned this one since it was brand new. I sold my original rebuilt RC10 truck conversion & Bolink Legends car to buy it. I think it's one of the coolest...
Last post
Maybe I'll get mine done before spring time comes around. Its only been an unfinished project for something like seven years now. :?
Ok i am getting this RC10L** im thinking its a RC10LSS but im not sure, Id like to mount a 1/10 NISSAN ZX-GTP from Mr Lexan, Does the RC10LSS have the same wheelbase and width as the original RC10L, Or is the car in the pics a different car?
Thanks
Last post
Not sure it came attached to a Tomy intruder buggy as onroad conversion, not got it now, was maybe 235mm though looked same as one came on my RC10L spares chassis
This old 80's wedge has been in my closet for many years. It's clearly got Andy's RC10 arms on it, but the chain drive is perhaps a conversion? Lot's of things throwing me off on this one........
I originally took dirt tires off of it when I got it...
Last post
My keen eye sees one universal axle and one dog bone axle. Maybe an oval thing or just a needed repair between races. :idea:
Anyway, it looks like a quality car that will clean up good. Nice that it has a good body still. I agree with ERouge keep...
Any photos of the car yet? :D
no, not yet :roll: I just threw everything together for a test run. Now that I know what I need to change (and replace :lol: ) I'm in the process of a tear down, cleaning and re-build :wink:
They were on the same team back then, so I figured a good place to post. Here is my Yokomo YRX-10, with some Yokomo Option Parts installed. It is still a work in progress. It has the optional carbon fiber arms, carbon fiber upper deck, carbon pod...
Last post
Part two. As I am still waiting on the brace, I have come across a second car, all original. It came over the big pond from Germany.
I need the dimensions of the front and rear wheels on the 10L? I am about to machine a set of aluminum wheels and I sold my 10L before I got measurements.
I need the outside diameter of the front and rear wheels. I also need the off set of the...
Last post
I have my boring bar figured out but my machine does not like boring and it is taking forever to get the right size. Becuase I am persistent, I am going to continue making a set of wheels for my 10L I just recently got.
I just picked up one and its sweet.Its the only one ive seen for the DS CARS.Now if i had all the DS alloy parts to bling it out.HMMMMMM Don :lol: Havent seen any hopped up ds cars around cept for few standard hopups or powdercoated chassis.Mine...
Last post
Yeah id like some of them when can afford them lol DON
Well I am not familiar with these cars at all and I don't understnad what makes the cars different from one another. I just recently bought a 10L and the box says it is a 10L Super Speedway.
I have been looking at the Proline bodies and I really...
Last post
everything is 10lss. the car and both extra chassis'.
Looked liked it was going to rain this morning and almost decided not to go to the flea market . Its been a long time since I found anything decent there but came across this box mixed together with several Tyco cars for $20 . Looks like a good mix...
Last post
Thanks guys, almost done with 10t . Gave it a good cleaning and then let the parts soak in an aluminium baking pan for 2 days in peroxide . I actually put all the white parts in at first but ran outside to grab the rpm transimission case after...
Here is my new DS. I found it on Craigslist in a lot. I got the DS fully loaded with Novak electronics, box, and all paperwork, a Losi JRXT, Losi XXTCR, a Traxxas Nitro Sport, tons of motors, speed controls, bodies, wheels, tires, and misc. parts...
Last post
I was afraid of that. I am attempting to strip one of the bodies I have, so we will see how that goes.
i have been getting more involved in on road and as i live in a fenced in acre of black top it only made sense
i already have mamba max thanks to the guy with one thumb
Paul
Hi, Im new here :)
I have this RC200, and I searched a little bit in the internet to find some informations.
But all RC200 that i've seen have grey boxes with a picture on top.
My RC200 have Box like the RC100, is it a very early version?
The...
Last post
RC200 box never opened. Depends if you are going to build it or sell it. Worth more if it definitely hasn't been opened. Amazing collection you have here. Any stories behind how you found them?
hi i am hoping that someone can please help me out i bought an rc 10 and it was raced back in the day by hamm racing team it has a team pit stop rear end ik know nothing about it except i was told they were mostly used in sprint cars im not a huge...
I finally put together my RC12L from parts stolen from other cars. It has a Hacker C40 6T motor that barely fits. It has a LT-200A ESC(overkill), cheapo Turnigy Lipo battery and a micro servo. I am looking for a cheapo 1/12 scale body to fit. It...
Last post
I finished up some more oldie pan cars. TRC Lynx and Composite Craft/rc12l hack job. Sad thing is, that the wife said to sell them.
I like the 12l set up for drag 8)
painting in the cold sucks and this is what I came up with for...
Hello all Happy Father's day to the father's on the forum.
This is ono project that I felt I had to change the rims on. Boy am I glad I did.
Let me know what you think?
Last post
Thank you guys for the comments.
I strayed away from tecnacrafts on this R/C model.
I wanted it to be closer to the original as possible.
These sees rims were the ticket.
Also some mbrs asked why I use Tecs so much.
I actually will be selling...
Went on a trip to the hobby shop to find a body for my clodbuster and saw these sitting on the counter . Yes , I know they wont fit on the clod :D but they were marked $5 plus an additional 70% off . Being an F1 fan and cheap , I couldnt pass them...
Last post
I have an Associated catalog from 1979 that shows the Wolf F1 is part # 2116 L (for Lexan) and the cars that it would fit would be an RC 1A (for Indy Car or F1 body) but probably would also fit an RC 2, RC 100 and RC 200. In other words a very early...
I'm trying to figure out if the RC10 DS front arms are the same length as the early narrow buggy arms. Are they longer or shorter. I'm trying to get a narrow width to fit an HPI Charger body on.
This is really a question for Mrlexan and maybe others who dabble in lexan or vacu-forming.
I have a few older out-of-production bodies (from various manufacturers) and I'm wondering if they can be donated to someone interested in remaking them as...
Last post
Mr. Lexan,
Have you tried to make a mold from a NIB vintage body for reproductions? If so, what material do you recommend using? I have two other related questions. Did you build your own vaccuform or do you have an industrial machine? And Lastly,...
I'm converting an old buggy to a dual sport style on road car and need some new wheels and tires. I'm looking for something other that plain dish wheels. I want to fit them under a 200mm body. Does anyone know of any new tires and wheels or how to...
Hey, I acquired one these differentials several years ago and just recently realized what I had. I own several RC300BD's cars, but now I would like to set this up on one of my cars. Does any one have any literature, exploded views or photo's of one...
Last post
Great! What I have is the version from your first two photo's posted. What I have is a assembled differential, some spare parts and a couple of hubs. I thinking that because the housing is a larger diameter than a standard axle, I need to find a...
Here is my one and only onroad car. Berrickster threw it together for me to mount this old skool TOJ on. I think it turned out well but it needs taller tires in the front and I would like the rims to match the back. Any help with that is...
Last post
That's nice!, I don't know if it was correct or not but I cut up a buggy driver for my TOJ ( after he was done taking a leak )
I am building a new RC10L and wanted to know what I can use to get the front tires to extend out to the same as the back??? I could turn something on the lathe but figured I would ask here first.
Scott
Last post
You could buy Bolink or similar on-road front wheel adapters, then use narrow or wide rear wheels on the front to get the right width. I did this on my RC10 and M.A.N.E. Eclipse with rear BSR caps mounted on all four corners.
Was wondering what body I can buy for the 10L cars?? I would like a stock car and road car body
Thanks
Scott
Last post
It depends if you need the body for a wide (10L) or narrow (10LSS) chassis. You will probably find more variety for the narrow cars. PM coming your way.
I just got a great lot of cars, I have a 12L, 12I, and 10L are their manuals on line? thanks
Last post
I have some 0mm offsets on my RS4 sport and I had planned to try those first. Looking at it without measuring, it appears that any offset should work and it will come down to personal preference.
That is an impressive DS you got there, and a great...
Seems like I have been working on this for 10 years. I've always had major glitching issues. So after a complete electronics transplant from an SC10 its about done. Just need a battery cup and a gear cover. This was a DS Conversion kit that I...
Last post
Wow that is sweet both of them, I love Nova's my dad had about 7 of them when I was growing up, you did a real nice job with the RC10 I love it :wink:
Users browsing this forum: No registered users and 4 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
