Some of you guys may recognize this truck. We pre-ordered this kit from Tower Hobbies back in 2009 when the SC10 platform first came out. Tried to do this back then, got our hand smacked, and it's been in...
Last post
fwiw I appreciate you guys kicking back the money I paid to get that rig.
If you find RC10Talk to be an invaluable resource, please help contribute by making a donation. All donations received go back into keeping the site operational. This ensures we will be able to continue going and growing!
I can see this thread falling into the either in front of my eyes but that's OK. I thought I would start a DSLR thread as I am considering moving from my 35mm EOS to my first digital a 400D. If anyone has an opinion I would be interested, my budget...
Last post
Thanks Mel... those are a couple years old now as most of my newer stuff is on CD.... that was all I had on my hard drive. The Maseratis are from the Monterey Historics in 2003. That year was the Ford 100 Year Anv. and Ford was the marquee. Being a...
I am a college employee in NC and we get to take 1 free class a semester. The Dean of engineering thinks I can take the CNC class without the prereqs because of my years with Caterpillar as long as I do it as an audit and not for credit. I am...
Last post
Thanks guys for the info. I have a lot to consider before I buy a machine. Hopefully the cnc class this summer will answer a lot of them, particularly do I need a cnc machine. Well I don't need one but I want one. I may find I don't want one after...
Well, it seems to be official. We are moving to the warmer climate of Huntsville, Alabama. Looks like I am officially leaving the Michigan area on March 14. I am going to have to put all my RC junk on hold for at least three months, until I figure...
Last post
Same here Steve, I too should have made a better effort. Looks like I am going to have to start over trying to find some new RC buddies in the South.
There are a bunch of people (Ford guys) DONE on this Wed, those buy outs that they talked about...
ok, international addresses confuse me. mostly due to my ignorance from not ever sending an international anything.
i'm writing out envelopes with int. addresses on them for the rc10talk stickers and dont wanna screw them up. some of these...
Last post
I would go USPS, as I think FedEx international is probably expensive. At the PO, use the little green slip LH side/white RH side and fill out both sides... declare a small value so that they don't have to pay import duties. You can you use the...
I was fixing a misplaced hole on a rally car body by gluing a piece of lexan inside with epoxy with the plan to make a new hole in that piece... I did not notice but the body touched my jeans and left epoxy on it... CALISS! (French canadian sware...
Last post
Yep, had the same results with one of my favorite shirts. Unfortunately, a couple weeks later, the fiber started breaking, the glue made it brittle. With-in a couple months, there was a hole in my shirt were the epoxy was. That was 2 years ago,...
i'm sure to some the name on the fender will give it away, but then again if you know the name you have to have recognized the paint first.
Last post
I bought mine new in fall 01 and rolled 12,000 miles on it around summer of 04. My boy was born in the spring of the same year and my girl was born about 16 months ago. It has 12,500 on it now. I swore I was a biker but things change when you have...
Anyone know what the website is for the forum that all the cool pro's used to go to and post on. It was kinda oldschool website, but had lots of knowledge and locations of races. I havent been there in several years. It was a great place that didnt...
all because I wanted to show my sons that I could build an RC10 blindfolded....I can't be the only one who has tried it. I started back in 88 when I got my first rc10 and been loyal every since. I tell her that I know them down in my soul (she got...
Last post
yep it took a little more than an hour. I have built so many it usually takes about 30 to 40 minutes.....now I'm not talking diff balls and shock oil and all the major stuff, most of that was already assembled, I basically put it together. You can...
Well. if I need money, I just have to do something about it. Specially if you need to buy something for your other hobby or should I say your No.1 hobby., which for me is Vinyl (records) and Hi-fi:D ...I need a new turn table and a record...
To those whom contacted me about Van's Invent, they have not returned my email or my phone message yet. I am persistant and will keep trying. I will let you know if and when they call me back. Stay Tuned.
Last post
Ira Dahm sold the Dahm's name quite a while ago... I wanna say two maybe three years ago (maybe longer, I can't remember). Van's Invent took everything over and from what everyone seems to deduce, at least around here, things have gone downhill...
If anyone is interested I started a fantasy deal with yahoo racing for the 2007 season, anyone here is welcome to sign up. I have invted everyone from TDODC and DODC also so if there is a cap on the amount of entries per room it is first come first...
My name is Tom (<--- as you can see :) ) and I'm a vintage RC fan boy!!
I have a Gold Tub RC10 currently being restored and a Mint FT B3 (not really vintage, but I love 'em. I also have a bunch of other classic RC cars including nearly...
Last post
Ahh, another Tamiyaclub member sucked into the allure of the Golden Oldies community! Cheers 8)
Hi all, me again with a quick ebay question. If I see an auction on ebay, and am wondering if it is something I can use, or if it is a good deal, am I out of line posting a link here and asking? I am wondering because I am a 70's-80's skateboard...
Last post
Simple rule to live by Don't bring your feelings
I think we get along real well (even though I too am a relatively new user).
Hey guys, Not sure if this is the correct place in the forum or if you even care, but feeling like a part of a family here (a tear rolls down my eye) :cry: , I figured I would share another passion of mine with all of you, Photography. This is from...
well, i'm into old cars and nostaglia drag racing. i saw this on one of gasser forums i'm on. it just wasn't time for this guy to go yet.
give it a sec. to load up. :shock:
Last post
I just did like two days ago. I'm still running win98, I think it's as good as it gets right now. Then again, I really don't know anything about computers, so maybe I'm just missing something.
hi
can anyone tell me why when i look for some parts on ebay for my gold pan rc10 , when i find what i want i look at shipping and it said u.s. only , are these guys scared to sent overseas or over to australia where i am from , as its hard to find...
Last post
hi guys
thanks for replying to message i hav a list of parts i need it will take time to get what i like to get, so if ya can help me out that would be great .
when you go to the hobby shop to buy parts, get there, look around, buy some stuff, and come home. then, you realize that you didn't get the parts that you needed, and they were the whole reason for going in the first place. :x
i guess i know...
Last post
and it's even worse when your smoking while your painting the car. :lol:
ok guys. i've decided to end the giveaway a little earlier, like i said yesterday. so, not to make you guys wait any longer.................
the winner...........of scr8p's new year's giveaway............is the one...........the...
Last post
The print shop has the artwork. I should have some idea of when they will be available in the next couple of days. I asked for three white sheets and three black sheets, each with two of each of the logos hoop sent me (total of six logos). The...
Man am I ever happy I was reffered to this site. read for 3 straight hours before I even registered. Glad to know that there are plenty of folks out there that are nuts about these cars also. Anyways look forward to reading and buying selling some...
Last post
Head south on 41 passed the boatramp, Showtime is on the left. You ever check the races out at East Bay?
No, unfortunately I wasn't doing much R/C at the time. The only hobby shop I ever went to while I lived in FL was one on US19 a little south...
Hi , I search a pic I have seen in the RC10TALK site, but I didn't find .
The pics have the driver and RC10 with white/pink body and TRINITY sticker ???
Thanks in advance
PRP
Last post
Yes, it's that, but I don't know why i'm sure to be is a RC10 and not an ULTIMA.
Thanks a lot
PRP
One thing that has bugged me is that I can hardly ever find my RC-10 auctions when i do a search on ebay. What keywords do you guys usually search for when loking for RC-10 parts?
Last post
Hey guys,
One thing to check.........I absolutely use the *exclude these words* function, under the advaned searches, and it works phenomenally well. However, there were times, where I just bypassed the advanced searches auctions, and used for...
Some times I think I spend too much on my hobbies. Then I see this and feel good all over again.
Last post
Just let me know. I would be more than happy to help (time and workload permitting).
Thanks again for the offer. I really really want a graphite chassis RC10 and a trailing arm car. Both hard to find here in the UK. Don't have to be new condition...
Hey All,I haven't been around much lately,but always try to stop in when I can.Anyhoot Hope everyone had a great Christmas,and have a safe and Happy New Year!!
alright, this is for anyone that wants to play along. i have a used nose plate, chassis, and motor plate. they are striped and almost ready to be painted. they are in nice condition, but not perfect. i also made a pair of nose brace tubes that will...
Last post
420 on T-shirts and on the net is a code for marijuana.
Hi all, by ways of an introduction this is bald ugly me with my car and my bike in my romper suit. I’m 35 years old (hence the bald) and from the North East of England (hence the ugly). I have been involved with RC of many types since 1978. My...
Last post
Welcome to the board.8)
I’m 35 years old (hence the bald)
35? Does that mean I've only got 4 more years of hair left? :shock: Well, as long as I don't get a beer belly. Oh wait, what's this...... oh crap. :x
I realized I was at my 99th post so I decided to use my 100th to share some love although some people (Jay) tend to shy away from warm and fuzzy things while others (Hoopty) is like a moth to a flame when it comes to love lol. So I'd like to wish...
Last post
Bscotti, I'm from Nassau County in Elmont. If you come down from Freeville, its definitely a trek!
Hi I just joined the forum, Ive been into vintage rc for a few years mostly Tamiya. I know a couple of the guys here shodog, Inetrc and Mr lexan, all fellow tamiya guys. I just snagged a really nice championship edition off the bay and hoping to get...
Last post
Thanks for the tips guys, Skidrowe YGM :wink:
those aluminum wheels really look sweet, I really like the 6 hole 2.2 he had. Might really be good for some street tires for racing the kids on the cul de sac in my neighborhood :lol:
I donno about you guys, but I'm online almost all of the time, and can be reached in a variety of ways if something might need immediate attention. :D I figured that considering that this is such a small group, it might be advtantageous to have...
what's the one thing, be it a new kit, a rare hard to find part, the last piece you need for that perfect resto, whatever. what is the one r/c thing you'd like to have under the tree this year, above all others. here's mine:
a custom works gbx...
Last post
all i want is the freaking front belt guide for my mip legends 4x4!
might as well want in one hand and poop in the other as my grandpa used to say. :wink:
also like to have more technacraft rc10 turnbuckle kits than i could possibly use. (cause...
build a sacrificial rc10, then serve it up off something crazy with the intention of a spectacular/devastating wreck, and post a pic of the aftermath. (video would be cool)
i think it would kinda fun. insteada building these damn queens all the...
Last post
i know my in-laws have a video cam, but i don't know if i'll be able to download it into the computer. i think you need some sort of memory stick, or something? i don't know. it's all greek to me.
here's my crash test dumbie.......................
Just my first post should be a hello to all. Asso_man! indirectly turned me on to the site after he contacted me about an ebay auction win of mine (I was the guy who won the Carbon Tub RC10.... Asso_man! I will let you know if it does not suite my...
Last post
Has this place lowered its standards so much that they would let a character like Jay in here????
Nice to see you on here Jay!! You're a great source of information for practically any vintage RC forum. I know you've been a great source of...
I was wondering if the site admin's might be interested in vBulletin software? Not that there is anything wrong with this one but I have an extra owned license that I do not need.
Last post
I don't know about it from an administrative standpoint, but as far as the end user standpoint I like this forum layout much better than the vbulletin layout. It seems like the VB layout always feels cluttered and overly-complicated, where as this...
Users browsing this forum: No registered users and 24 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum