Not that we have tons of new members each day, but we thought we would restructure this forum a little bit and use this spot for new members to introduce themselves.
in 1985 i begged my parents to get me a Kyosho Pegasus. I really wanted an RC10, but that was too expensive for a 14 year old according to my parents (boo). after spending two summers completely trashing the Pegasus, it was stolen from our back...
Last post
Welcome to the forum , looks like your going to fit in great , very lucky to still have your cars .
while still having the cars is pretty cool, they were all very well used and abused. the least challenging to get back to running condition is the...
Hi everyone. I trash picked a couple boxes of RC stuff. One box had a gold pan rc10 with all kinds of extra stuff. Other boxes had plane and boat parts in them. All paperwork and receipts ranged from 83 to 89. Anyhow, i have never owned a remote...
Last post
You would be very welcome at any track with that car and electronics gear! :) That is a time capsule! Magnum radio, Novak, dyed nylon parts....
1/8 tracks tend to be a bit extreme for vintage cars. Sounds like you are up around Cleveland, so the...
Getting back into the hobby after over 20 years away from it. Can't wait to see what other people are up to and show some of my projects that I'm working on with you guys.
Last post
Welcome aboard, I've never seen an adapted 1:1 rig like yours. I bet that makes getting around a lot easier and way cooler than a mini van!
Good day
This is Mark from the Netherlands.
During the clean out of my basement I stumbled across my old flight cases packed with my vintage Hirobo Alien Mid 4 Incl. Had forgotten about it for a while but when I opened up the case my memories all...
Last post
Good day
This is Mark from the Netherlands.
During the clean out of my basement I stumbled across my old flight cases packed with my vintage Hirobo Alien Mid 4 Incl. Had forgotten about it for a while but when I opened up the case my memories all...
Hey all, just posting my first message. I'm getting back into the hobby after 25 years. I'm not interested in vintage RC stuff but I have an old RC truck (JrXT ?) that still runs and I was going to throw out, but then thought maybe someone would...
Last post
Welcome - fellow SoCal member here - vintage is a riot at the track, I still toss my vintage out against the modern guys just to have a blast. We have some small groups who have vintage only battles as well, before tossing it away, ask around, take...
Finally posting on this forum after just recently joining. I am not new to rc cars however you could say like a lot of us I’ve had an extend break from the hobby. I collected and read rc car magazines and catalogues religiously in the 90’s. As like...
Last post
Cool story Sean, thanks for sharing. I too enjoy reading/hearing how folks got into the hobby. As mentioned, earlier RC10's will likely be easier to source and build in lieu of the B2/3. Also, reproduced 3D printed RC10 parts are more common.
Hey guys new member here as of a week or so ago. Just thought I would introduce myself here..I was on clod talk which will shut down officially on the 1st. I love the site same format and the topics here are great. Hope all is well with everyone...
Hi, my name is Matt, I heard about this group from Scale Builders Guild on youtube. I have a couple vintage projects going and came looking for info on the rc10. I just got an A stamp buggy that needs to be gone through. Looking forward to posting...
Hi guys,
I am happy to join here. I am from Gemany and 1993 I have worked 4 years in R&D of the German RC manufacturer robbe modellsport which unfortunatley closed 2016.
So, my favorites are cars are always somehow linked with that company but sure...
Last post
Welcome Harry , I only in the last few years learned of Robbe and I think we'd all love to know more from someone inside the company , I'm hoping you have collected a few you can share with us ,the more pictures the better :D .
I wanted to introduce myself to everyone. A couple of you already know who I am, and maybe remember my sisters and I running around M&M Raceway as a kids picking up little parts (some broken), packaging them with my dad’s equipment, and trying to...
Last post
Hey Adam...what were you racing at the Hobby Shack parking lot races? Was it a Bolink Legend spec car? I remember you racing with us but can't remember what car...lol...
Good memory, Dave! That was the first car my dad got me. I’ve got pictures...
I've been out of the hobby for atleast a decade. Some old school guys might remember me. I helped start something you all use..... lol. Always been into Clodbusters mainly. Figured it was a good time to try getting my old RC's going. Missed the...
Last post
Thanks guys, got 3 out of 4 rcs going today. Then broke all 3! Haha.
Hi guys,
Happy to join this forum. I'm Mathieu, living in Cannes France, 43yrs old. I've been a RC fan when I was 12-15yrs. My first RC was a Grasshopper and then a Kyosho Raider Pro.
I decided afterwards to move to a nitro on track with a Kyosho...
Last post
Nice job. Its very cool that you have your original car from childhood.
New to the forum, stumbled across it when I was looking for parts for my old RC car, I have a Losi XX, its been sat around for a while but with my daughter showing an interest I thought I would dust it off and we could both use it.
Hi Guys, my name is Dimitri, and I'm from Brisbane, Australia.
I've browsed the forum on and off for years when it pops up in my google searches. had an on and off interest in RC since an early age. I had a couple of Tamiya buggies, a Traxxas, and...
Last post
Welcome to the forum all are welcome (even Traxxas lovers :lol: )
Hello all! After being out of the hobby since the early 90’s I just recently got back in…got tired of paying $50-75 for the junk cars at Walmart and my boys destroying them in a couple of weeks so I bit the bullet…all 5 of my boys got 1/10 hobby...
Last post
It wasn’t cheap but I wouldn’t consider it terribly expensive either…I got them rtr cars at about $200 a piece…of course then I had to buy fast chargers and extra batteries on top of that but cars ain’t fun if you have to charge them for 8 hours to...
Hello RC10 fans.
My name is Vincent Leclerc, I live in France near Perpignan, almost at the Spanish border.
I started the RC car in 1980, with a Stock car Mardave.
Stock car Mardave.jpg
Then a copy of SG Futura made at the technical school....
Last post
Hi Vincent - am loving the pictures of your old cars, especially the Mardaves.
We have a summer home in Carcassonne which isn't exactly a million miles away from Perpignan. We head down that way occasionally via Narbonne and sometimes to Argeles...
I have been lurking around here long enough, it's about time for me to sign up. I have like others gotten the RC itch and picked up a few gold pan chassis. The plan is to cobble together what I can - have some fun and see where I go from there. I...
Nice forum you guys have here. So many threads. I've been lurking for years but finally got my own rc10 ce handed to me from a friend. Needs put back together but looks all there.
I'll be looking around figure something to do with this. Seems...
Last post
I’m Glad I found this forum. Now to find parts for my old good tub RC10
Hi guys, guess I did things backwards by starting my JRX2 build thread first so I'll post that below. :D But then again I decided to dip a toe into a vintage race build and did a big ol belly flop instead lol I started racing here in Vegas at Circus...
Last post
Thats awesome! Brings back good memories, thanks for posting that
I thought i'd just say a quick hello, great forum and it's already been a great help and also inspiration for me to get back into my old hobby, i'm 43 yo and i'm assuming that many of you are of that kinda age - don't we look back at the 80s and 90s...
Hello good people of RC10talk, another long-term lurker signing up! I've been around rc cars since 1978 but rather than anaesthetise people I'll keep it simple..
My main things are 1/8 pan cars from the 1970s (& all that goes with them) and modern...
Last post
Welcome aboard mate, and great to see you here. I'm sure you'll set the place on fire :lol: 8) :wink:
My name is Russ. I am not sure when I started with RC cars but it had to be in the early to mid 90's. Way before that it was slot cars with my dad in the 60's. I have been hooked on cars of all types since then. I was glad to find this forum and...
Last post
Where was the track? I lived there for a few years and did not know it was there
Hello from Rhode Island and no it’s not an island lol. I started down the rc rabbit hole in 83 when I was 13 and my parents got me my first one a tamiya frog. I’ve always wanted an rc10 and finally got to add one to my collection of scale and...
New member here from outside of Boston. Grew up studying late-80s and early-90s RC Car Action mags and Tower Hobbies catalogs. Family budget dictated a Black Phantom from the Shack, and I loved it. Two-plus decades later I tripped across an RC10 B2...
Last post
Welcome! RCCA was so great back in the day.. Since I got back in the hobby I have collected every issue, special and book from the first 10 years..such an invaluable resource. Be sure to vote in the Build of the Month threads! Look forward to seeing...
Hello all! New to this forum. My first ever RC car was the RC10T RS back when I was a kid. I lost interest in the hobby shortly thereafter and sold my cars but within the last few years have jumped back into the hobby. I was able to find a NIB...
Last post
Welcome new here as well.
How much did you pay for that lot? Just curious ballpark figure. Trying to slowly build up my collection.
$500. Came with 4 T4's that are ready to run, 2 new spare clear bodies, 1 new spare chassis, bag of new spare...
I was into RC in the mid to late 80s and have lusted over the gold pan RC10 for years. I could never afford one at the time and had friends that had them.
Hi all, glad to be here. A friend at work recently gave me a few RC cars, one being an RC10 with graphite chassis. It is in pretty rough shape, but i'm gonna try to restore it as the RC10 was my first RC car, and has always held a special place in...
After years of resisting, I've cracked and finally bought another gold pan since my youth. I took great pains to find a car that was virtually identical (Cadillac A stamp). I'm excited to bring this car back to life and in the process...
I'm a Brit but I'm now living in Middle Georgia and having had a few Tamiya RC kits in my youth I recently decided to get back into the RC car scene for something to do. In the 80s I used to have a Grasshopper, Hornet and Fox (2wd was more...
Last post
I can't wait to see your build pics.
I can't wait to have some time to build something!! Roll on Christmas! ;-)
Hi all - I recently bought a used RC10 B4.2 to reclaim a piece of my past. Back in college a friend and I maxed credit cards on a couple of RC10 B2 setups (the guy at the hobby store had a *great* day). I must've sold it along the way, because I...
Last post
Hi all - I recently bought a used RC10 B4.2 to reclaim a piece of my past. Back in college a friend and I maxed credit cards on a couple of RC10 B2 setups (the guy at the hobby store had a *great* day). I must've sold it along the way, because I...
I've owned my little gold-panned friend for just over 30 years, and am delighted to have found this group. The body shown in my profile pic was painted by a talented friend who ran a body shop, putting several coats of PPG automotive paint down to...
Last post
Still trying to do this right, so thanks for the tip (city/state) :wink: , I haven't been part of a group like this since selling my Miata about six years ago.. Whole new set of rules.
I've been lurking for some time but just posted this week finally. I have one RC10 I've owned since the 80's and recently picked up two more to enjoy restoring and...
After some help to save my sanity. I found this Steel topshaft at home and cant work out what its for, The best guess i have is that its an aftermarket B4 top shaft ??? As its the same length also. However, it has a thicker shoulder up to the gear...
Last post
Ignore me, sussed it now....... :)
Wait what was it?
Probably something to do with the machined spacer instead of a bearing surface
I was bit by the rc10 bug about 3 months Ago with a purchase of 3 gold pans. I have since acquired over 30 projects covering most variations of the buggy and truck. I have more fun tearing down cleaning repairing and painting up new bodies than...
Last post
What's up Utah. 30 projects acquired in 3 so months... hot damn... hope you decide to take part in Build of the Month and enter some builds.
my name is Pat and I live on the south-side of Chicago.
I have been into RC cars since 1987 . Purchased a slightly used Tamiya Blackfoot when I was a kid . Then my first kit : ) an RC10 ! Had a great time racing my old buggy back in the late 80’s...
Last post
Welcome aboard , you'll fit in just fine here :D
I don't know; that workstation looks a little too organized! :lol: j/k Welcome to the forum!
Been into rc since I was 11 im 32 now and I still love the hobby. I have 1 rc10gt plus and 3 rc10gt2's
Also have 3 large scale gas boats and 2 5th scale gas trucks.
Still figuring out the site so idk how to post pics maybe...
Last post
Hi and welcome to the forum.
I prefer uploading the pictures directly to this site. That way the don’t disappear when someone closes theis hosting service account.
When you start a post you have to scroll down and use the attachment tab.
Got a call from a friend who purchased a Tamiya so I decided to dust off my old RC10 thats been sitting in a box for almost 30years. Still looked pretty clean as it really was never used much. Anyway, I lightly oiled...
Last post
I really like your paint scheme; its like something I would have done BITD. Have fun with it!
I’m a new member, but have been using this site for years. It is an awesome source of information and ideas. I look forward to showing some of my builds. :D
Last post
Thanks.
I started in RC way back in 1984 when I got my first real Rc car, the tamiya grasshopper. I still have the original vehicle today, it was converted to a monster truck when I was a kid. I remember the first time seeing the RC10, my cousin had...
Thanks for the add, I have recently acquired a few RC10's and am deciding how to proceed, as to restoration or not or upgrading electronics and just having fun. One of my recent acquisitions is a very original but in mostly poor shape A stamp car. I...
Last post
Hi and welcome , as above any restoration starts with stripping , cleaning and looking for worn or broken parts , it's kind of like building a kit ,sort of part of the ritual :D .
Hey guys! What a nice place with lots of information on vintage stuff. Glad to be here!
Currently my interest lies in brushed motors for on-road racing. A little crazy in BL era, but quite exiting to learn what people used years ago and check how it...
Last post
Thanks for the notice. Googled about it and it's another layer of information to learn before making a proper build.
Hide all,
Freaky from Alabama here. Old man that's been into RC since control line airplanes as s kid. I'm mostly an air guy due to starting out in it and somehow becoming the local repair guy over the years. Delve in water here and there, but never...
I have been into R/C cars for most of my life and I took a long hiatus when going to college and then trying to establish a career. Mothballing my RC10 gold pan during this time. Regardless, this RC10 was my introduction to R/C and quickly...
Last post
Welcome! I am going through the same motions with some of my older RC cars and others picked up along the way. I have found good help from the people on this board and I am sure you will find the same.
Users browsing this forum: Trendiction [Bot] and 3 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Trendiction [Bot] and 3 guests