Page 1 of 2

Ten4 Nose tubes and hardware kit pre-preorder

Posted: Tue Aug 11, 2015 8:04 pm
by mk-Zero
I will be offering custom nose tubes for the forthcoming Ten4 4WD RC10 conversion kit. The Ten4 kit is made to use the front noseplate in the "long wheelbase" position. That being the case, the factory RC10 nose tubes are too short. You can drill and tap the stock RC10 nose tubes, but they will have an extra hole in them, creating an unattractive and weak pair of tubes. Another option is to make your own tubes, which is fairly simple if you have the proper tooling and can source the correct tubing. I will be offering ready to go tubes for similar to what you would pay for a pair of J Concepts tubes.
The Nose tube set is $15 + shipping

I will also be offering a Ten4 Hardware kit that consists of the rear belt guide shaft (that goes in the bulkhead), the bearings that go on it, and the 2-56 retainer screw. More details and pricing to follow.
The hardware kit is $10 + shipping

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Wed Sep 23, 2015 10:18 am
by Dcast
Looking forward to moving forward with the project. Thanks again for your efforts

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Wed Sep 23, 2015 11:24 pm
by pumpkinfish
Brian,

Can you change me to hardware only? I won't be needing nosetubes :mrgreen:

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Wed Sep 23, 2015 11:25 pm
by mk-Zero
pumpkinfish wrote:Brian,

Can you change me to hardware only? I won't be needing nosetubes :mrgreen:
Sure thing!

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Sun Sep 27, 2015 5:47 pm
by mk-Zero
I made 6 set of nosetubes last night.

Nose tubes will be $15 a set.

Image

I'll work on getting the hardware kits together, i have all the parts. Once I'm ready to ship I'll let everyone know so we can arrange payment

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Fri Oct 09, 2015 2:56 pm
by mk-Zero
I put together 6 hardware kits the other night.

Image

The kits are composed of long stainless steel screw for Ten4 front tensioner (replaces screw that holds left nose tube to pan) and matching screws for the other 3 nose tube screws (right nose tube to pan and 2x nose tube to nose plate), aluminum washer and nylock nut for front tensioner, bearings for front tensioner, stainless steel rear belt guide shaft, rear belt guide bearings, and rear belt guide shaft retainer screw. The cost of the kits will be $10.

I should be able to ship the nose tubes and hardware kits next week, I'll hit you up individually for payment before shipping. In the mean time I'll start making more nose tubes and hardware kits to meet the needs of everyone on the list.

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Mon Oct 12, 2015 8:54 am
by DMAT
nice, those should go well with all my other stainless hardware that I have for building the cars. I swear that 1 purchase from fastenal has covered my ass for quite a few cars now. I've yet to break a screw too :)

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Fri Oct 23, 2015 1:13 pm
by mk-Zero
Hardware kits and nose tubes should all be shipping out tomorrow. I sent everyone on the list a PM with your order summary and my paypal address. Please send paypal today if possible and be sure to include your shipping address. I've had a couple people that haven't sent their addresses. Note this could delay when your package gets sent. Also please make sure I know your screen name here on the board when you paypal so I know what you ordered.

Thank you,

Brian

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Sat Oct 24, 2015 5:07 pm
by mk-Zero
I shipped everyone's parts today who payed, list updated. I'll send out tracking numbers later today.

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Tue Dec 13, 2016 7:32 pm
by n20capri
He man can I purchase a set of the nose tubes please? Thanks,
Mike
mk-Zero wrote:I made 6 set of nosetubes last night.

Nose tubes will be $15 a set.

Image

I'll work on getting the hardware kits together, i have all the parts. Once I'm ready to ship I'll let everyone know so we can arrange payment

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Sat Aug 25, 2018 4:36 pm
by tuna.Rc
Are these parts still available to buy ?

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Sat Aug 25, 2018 5:29 pm
by mk-Zero
I'll have to check stock, but I'm out of town right now. Do you need everything?

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Mon Sep 03, 2018 11:02 pm
by tuna.Rc
mk-Zero wrote: Sat Aug 25, 2018 5:29 pm I'll have to check stock, but I'm out of town right now. Do you need everything?
Yes , everything to build one . all I have is a A stamp Goldie

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Wed Sep 05, 2018 8:01 pm
by mk-Zero
Okay, I'll try to look tonight and let you know. The hard to find parts last I looked are the B44 front CVA assemblies. Do you already have the input/output shafts and pulleys? Unfortunately they are no longer available.

Re: Ten4 Nose tubes and hardware kit pre-preorder

Posted: Thu Sep 26, 2019 6:51 pm
by Mwp1111
Can someone advise where I can order a complete hardware kit? I need the rear bulkhead parts in particular

Thanks