My $100 Losi XX and XXX Kinwalds

[Zac_F71]

[Zac_F71]

Sadly I lost the header card for the armature, but still have the card for the can setup..

[Zac_F71]

Another HUGE update!

Well I bought an unadvertised Losi XXX CR BK2 last week, it came today.. OMG it's nice! I ended up robbing all the stainless hardware, and Trinity aluminum parts for my other XXX. Made the new buggy a stock roller with a P2K 27t spec motor, and old Losi wheels/tires.. Here is what I robbed/swapped off the new one to my clean one..

Cleaner front wheels hubs (blue aluminum)
3 blue 4-40 mini nuts (in steering knuckles and servo arm)
Conical washers on the steering rack hold down
Replaced all steel hardware with stainless
Correct cvd's for the Trinity wheel hubs
Blue aluminum wing mounts
Nos Trinity blue aluminum wheel nuts
Swapped left front arms so the clean one has correct arms

Still need..
Trinity rear bearing carrier's coming from a friend
(7) Trinity 4-40 mini nuts
(6) Trinity 4-40 large nuts
New TBG body/wing done in the same style by Trung Au
Blue rear wheels
Nos Losi tires

[Zac_F71]

The XXX BK2 I got -

P2K 27t motor (out of the XX, which now has the Komodo 19t spec in it)
Trinity shock collars
Futaba S3003 servo
Novak Racer ESC (just bought)
Still need to find a Losi Spektrum 2.4 radio like the other 2 - missing - battery strap, gear cover, and rear body mounts (found everything but the radio so far)

It came with 5 bodies, 3 wings, 4 NIP front Blue wheels, NIP white wheel set, 2 very nice used sets of white wheels with Pro-Line/ Losi tires..

The best body/wing out of the bunch - put white Losi wheels with old Losi tires on it

[Lavigna]

Bumping an older thread.

It really sucks that all these photos are gone. If the OP sees this, can you please reinstate the pictures? 8

[mikea96]

Looks like the last time he logged into the site was 2018