My Vintage Schumacher Projects
My Vintage Schumacher Projects
Hi All,
I'm pretty new to RC10Talk, but know quite a few of you from the vintage section on Oople.
Thought I'd start a thread here and share some of my Vintage Schumacher projects (I always find I get more done on these projects during the winter, so maybe there will be some more progress to show soon!)
Most of my collection have been in my possession since new or nearly new, from when I raced as a kid, but I have acquired a few additions - its funny how one project leads to another!
I have my original ProCAT converted to a brushless & Lipo runner now, but its pictured here as it was when I dug it out of the loft, complete with dirt from its last event in Taunton in 1990. I almost didn't want to clean it up!
More recently I have restored my CAT SWB, with probably 90% new parts, as you can see its pretty mint now.
Next up will be an XL, then an an XLS and then perhaps I'll do something with the other two ProCATs I've got lying in bits!
I've acquired a Tanaplan ProCAT chassis set in with a parts bundle and a fibrelyte SWB chassis set, so maybe a SWB runner for a laugh?...
Let me know if you want to see more!
(struggled a bit getting pics to upload, so hope this works OK!)
I'm pretty new to RC10Talk, but know quite a few of you from the vintage section on Oople.
Thought I'd start a thread here and share some of my Vintage Schumacher projects (I always find I get more done on these projects during the winter, so maybe there will be some more progress to show soon!)
Most of my collection have been in my possession since new or nearly new, from when I raced as a kid, but I have acquired a few additions - its funny how one project leads to another!
I have my original ProCAT converted to a brushless & Lipo runner now, but its pictured here as it was when I dug it out of the loft, complete with dirt from its last event in Taunton in 1990. I almost didn't want to clean it up!
More recently I have restored my CAT SWB, with probably 90% new parts, as you can see its pretty mint now.
Next up will be an XL, then an an XLS and then perhaps I'll do something with the other two ProCATs I've got lying in bits!
I've acquired a Tanaplan ProCAT chassis set in with a parts bundle and a fibrelyte SWB chassis set, so maybe a SWB runner for a laugh?...
Let me know if you want to see more!
(struggled a bit getting pics to upload, so hope this works OK!)
- DennisM
- Approved Member
- Posts: 2403
- Joined: Sun Feb 26, 2012 7:07 am
- Location: Denmark
- Has thanked: 30 times
- Been thanked: 64 times
Re: My Vintage Schumacher Projects
It´s hard not to like the SWB, even when beating the c... out of my MID.
Very clean example You´ve got.
Show us that Tanaplan and FibreLyte chassis
Very clean example You´ve got.
Show us that Tanaplan and FibreLyte chassis
Gone fishing
Re: My Vintage Schumacher Projects
Here's the Tanaplan chassis set.
Not sure whether to use this for a ProCAT build or if the standard chassis would be more sought after?
More car pics later...
Not sure whether to use this for a ProCAT build or if the standard chassis would be more sought after?
More car pics later...
Re: My Vintage Schumacher Projects
Here's my old racer ProCAT in its current form.
It runs an 8.5 brushless motor, with saddle lipos.
Saddle nests are from a Schumacher SV2 with some custom carbon mounts to avoid needing to drill the standard chassis.
I've also made a custom slipper which uses an SV2 spur and slipper pads on a shaft from an original period Schumacher slipper.
I've made carbon, ballraced steering arms for it and its currently got more modern CAT SX shocks on it.
It goes very well, hope to run it against Derbydans ProCAT at Silverstone soon!
(Let me know when you're bringing yours out to play Dan?)
It runs an 8.5 brushless motor, with saddle lipos.
Saddle nests are from a Schumacher SV2 with some custom carbon mounts to avoid needing to drill the standard chassis.
I've also made a custom slipper which uses an SV2 spur and slipper pads on a shaft from an original period Schumacher slipper.
I've made carbon, ballraced steering arms for it and its currently got more modern CAT SX shocks on it.
It goes very well, hope to run it against Derbydans ProCAT at Silverstone soon!
(Let me know when you're bringing yours out to play Dan?)
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: My Vintage Schumacher Projects
Hi Nigel.... good to see your vintage Schumachers over here on RC10Talk... I love the shots of your ProCat in period trim (& period mud )
As for having a ProCat 'show-down' - name your date & i'll make sure my car is ready... I'm racing this Tuesday
As for having a ProCat 'show-down' - name your date & i'll make sure my car is ready... I'm racing this Tuesday
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
Re: My Vintage Schumacher Projects
I've carefully set aside all the period bits so it can go back as it was, but that mud is gone forever!DerbyDan wrote:Hi Nigel.... good to see your vintage Schumachers over here on RC10Talk... I love the shots of your ProCat in period trim (& period mud )
As for having a ProCat 'show-down' - name your date & i'll make sure my car is ready... I'm racing this Tuesday
Let's have a chat tomorrow about getting a vintage heat together, we can get James to bring his mid out, and there was a guy running a YZ10 a few weeks back, we can rope him in I'm sure.
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: My Vintage Schumacher Projects
Yeah I think the guy with the YZ-10 was Anthony Hill (a well known name in R/C in this area from the very early days of R/C racing up to the early 90s) I'm sure we could rope Chris Giles (Jiffy) in on it also
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
Re: My Vintage Schumacher Projects
Yes, it was Anthony, his name had escaped me earlier.DerbyDan wrote:Yeah I think the guy with the YZ-10 was Anthony Hill (a well known name in R/C in this area from the very early days of R/C racing up to the early 90s) I'm sure we could rope Chris Giles (Jiffy) in on it also
What's Jiffy got in the shed then?
Foley could be tempted to wheel out a CAT or possibly even an Intruder
Re: My Vintage Schumacher Projects
So, here is my Fibrelyte Short Wheelbase Chassis and top deck.
Starting to think about building a runner SWB CAT with a modern twist, kind of the evil twin to my mint standard SWB!
Starting to think about building a runner SWB CAT with a modern twist, kind of the evil twin to my mint standard SWB!
-
- Approved Member
- Posts: 578
- Joined: Tue Feb 25, 2014 3:55 am
- Location: Nottingham, UK
- Been thanked: 3 times
-
- Approved Member
- Posts: 578
- Joined: Tue Feb 25, 2014 3:55 am
- Location: Nottingham, UK
- Been thanked: 3 times
Re: My Vintage Schumacher Projects
Ha you wish!!! I'm just waiting on my rear wishbone mounts then I'll have all
I need for my first xls won't be long now
I need for my first xls won't be long now
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 648 Views
-
Last post by slotcarrod
-
- 8 Replies
- 1414 Views
-
Last post by Eau Rouge
-
- 6 Replies
- 2219 Views
-
Last post by yachty
-
- 8 Replies
- 2892 Views
-
Last post by Danf1275
-
- 82 Replies
- 12804 Views
-
Last post by Incredible_Serious
-
- 13 Replies
- 1608 Views
-
Last post by hkp
-
- 29 Replies
- 4763 Views
-
Last post by octet
-
- 14 Replies
- 3686 Views
-
Last post by npdp72
Who is online
Users browsing this forum: No registered users and 11 guests