Albino Mashup/Mutt

[DennisM]

The question is obvious, but what´s the answer

[klavy69]

Looks like Jeff has been busy but don't provide answers when I don't know the questions

Todd

[GoMachV]

I didn't do it! I sent black stuff not natural. I'm thinking he cheated on me :lol:

Hey Dennis, what shocks are going on that?!

[hugger19]

its a prototype I WANT IT

[SFC K]

I'm clueless on this but I love the color of the chassis plates (Hint, hint... Jeff)


This is going to look sweet!

[Peakey]

Sod the chassis look at that motor mount that's a thing of beauty!!!! who made that and where can I get one

[Mr. ED]

My bet is on gpm. They did the anodize and chamfer afterwards stuff a lot

[rccars4sal]

I thought I saw some team suzuki motor mounts that looked like that. If not Suzuki, then I guess gpm also. Actually, I thought some of the factory works motor mounts looked like that too but in grey or silver. Whats the chassis going to be? Custom? Based on 91 92 93 dimentions?

[DennisM]

Peakey was right about the motormount being the thing in question - Mr. ED has the maker right.
But it´s not meant for Yokomo and the reason why I cheated on Jeff
The mounting holes are of compared to the Yokomo mount so I had to do an new chassis and topdeck without motormount holes.

The shocktowers are going to be 91 at the front and a homegrown 93 at the rear.

As for shocks, I´ve got two setups in mind - either AE or Academy purple shocks ala Option house golds.

If possible, I´ll try to find some sort of natural nylon arms for it.

[GoMachV]

What's the diameter of those shocks?

Looking great Dennis!

[DennisM]

Just about 9,987 mm bore

[DennisM]

Update

[GoMachV]

sexy!

[green510]

Awesome

Reminds me of milk chocolate

[DennisM]

870 chassis blank by Jeff, formed into Works ´93 chassis.
HotDog front and rear bulkhead (no YR4 bumper cutout at the front)
Fastrax motormount
Works ´92 rear shockmount, fibrelyte Works 91/92 front shockmount.
Works rear arms and carriers - front arms are RPM rears for 870, modified to accept CAT 2000 C-hubs.
I hope to build some diffs from GPM delrin pulleys and perhaps Academy outdrives. (need to save the nip´s for the ´93 build )

Layshaft is a random, cutdown, 5mm axle with 4mm threads.
Inner plate is original Yokomo T.C.S (which actually is the same as an inner plate from a Stealth with an added belt pulley and remachined groove for the 2,5mm crosspin)
Outer plate is Kyosho ZX-S, with added groove to hold the pad.
Front pulley is std. Yokomo