Vintage Traxxas RUNNERS only
-
- Approved Member
- Posts: 243
- Joined: Wed Nov 11, 2009 5:41 pm
- Location: NJ
- Been thanked: 3 times
Re: Vintage Traxxas RUNNERS only
I'm loving that TCP body! The B3 body was close, but I think the Traxxas body looks way nicer! Are you missing the aluminum wing tubes?
Re: Vintage Traxxas RUNNERS only
harry697 wrote:I'm loving that TCP body! The B3 body was close, but I think the Traxxas body looks way nicer! Are you missing the aluminum wing tubes?
Great to hear from you Harry. Yes I'm missing the wing tubes and wire. The body is not a traxxas body, its a trx-3 repo CobraKen made. I bought it from him in the UK. It's a really nice thickness and spot on. I'm very happy with it. I hope he sells more and keeps making them. I want to send him an SRT body for him to clone/sell. I'll have to work that out with emaxx2.0 and ken though...
Re: Vintage Traxxas RUNNERS only
I finally, got an awesome wing mount for the TCP! The wing mount from a Shoemasher KR
So happy with this! First I trimmed the wing down to a good size, then I worked on the shock tower... The holes drilled to fit in the shock tower was easy because the upper holes lined up perfectly and only needed to open the top to fit 1/8" and then drill the slot for the lower dowl to fit. I'll be ordering up a new wing mount to replace the one I stole.
So happy with this! First I trimmed the wing down to a good size, then I worked on the shock tower... The holes drilled to fit in the shock tower was easy because the upper holes lined up perfectly and only needed to open the top to fit 1/8" and then drill the slot for the lower dowl to fit. I'll be ordering up a new wing mount to replace the one I stole.
Re: Vintage Traxxas RUNNERS only
An update: Wendy helped me solder all new connections on esc,motor and battery. After that, I made a esc mounting bracket from G10. This bracket allows me to mount the esc without being in the way of the battery removal/install
My ESC was too tall to fit in the side regular locations and I really like this esc and so I devised this plate without altering the car in any way.
Its a very tight fit under there!
My ESC was too tall to fit in the side regular locations and I really like this esc and so I devised this plate without altering the car in any way.
Its a very tight fit under there!
- klavy69
- Moderator
- Posts: 5138
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 534 times
- Been thanked: 253 times
Re: Vintage Traxxas RUNNERS only
looks like an alien in a cockpit of a spaceship
Todd
Todd
Peace and professionlism.....Kabunga signing off!!!
Re: Vintage Traxxas RUNNERS only
ya it does! I love the trx3 body.klavy69 wrote:looks like an alien in a cockpit of a spaceship
Todd
Re: Vintage Traxxas RUNNERS only
Got front and rear fiberlyte shock towers. Installed the front tower... Fit great, easy install...
Still haven't installed the rear tower because I have to drill the holes for the wing mounts...
This is a wider tower than factory and provides 3 holes for shock positioning. Looks and feels bulletproof
Still haven't installed the rear tower because I have to drill the holes for the wing mounts...
This is a wider tower than factory and provides 3 holes for shock positioning. Looks and feels bulletproof
Re: Vintage Traxxas RUNNERS only
Took the TCP apart to clean it
...decided to show the towers compared:
...decided to show the towers compared:
Re: Vintage Traxxas RUNNERS only
Got all the plastic parts scrubbed down clean and everything back together...
Drilled the holes in the shock tower for the new wing mounts:
Installed MIP axles and put limiters on the shock shafts to reduce max shock compression.
doh
Hit a snag... the rear CF tower is thicker than factory so it pushes the gearbox backwards and causes a bind in the chassis.
I need to shave 1mm off the back of the battery bulkhead to fit the rear tower without causing a bind. I wonder if fiberlyte knows this...
Drilled the holes in the shock tower for the new wing mounts:
Installed MIP axles and put limiters on the shock shafts to reduce max shock compression.
doh
Hit a snag... the rear CF tower is thicker than factory so it pushes the gearbox backwards and causes a bind in the chassis.
I need to shave 1mm off the back of the battery bulkhead to fit the rear tower without causing a bind. I wonder if fiberlyte knows this...
Re: Vintage Traxxas RUNNERS only
I thinned out my Traxxas collection to a single SRT and TCP... Lately I've been tinkering with my old SRT....
Here's the latest shots of the SRT. Just installed the 8.5T sensored motor. Bumped the timing on the motor and soldered 5mm bullet connectors to the wires.
Here's the latest shots of the SRT. Just installed the 8.5T sensored motor. Bumped the timing on the motor and soldered 5mm bullet connectors to the wires.
- klavy69
- Moderator
- Posts: 5138
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 534 times
- Been thanked: 253 times
Re: Vintage Traxxas RUNNERS only
well if you thin down anything it looks like you kept the best of what I'd think about from Traxxas...maybe a trx1 should sit by its younger siblings though
Todd
Todd
Peace and professionlism.....Kabunga signing off!!!
Re: Vintage Traxxas RUNNERS only
A TRX-1? Ohh noo...klavy69 wrote:...maybe a trx1 should sit by its younger siblings though
Todd
Re: Vintage Traxxas RUNNERS only
Tested a lot of setups and ended up putting together my favorite combo on this one.klavy69 wrote: it looks like you kept the best of what I'd think about from Traxxas...
Todd
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 280 Replies
- 19539 Views
-
Last post by klavy69
-
- 1 Replies
- 364 Views
-
Last post by Coelacanth
-
- 3 Replies
- 767 Views
-
Last post by Coelacanth
-
- 1 Replies
- 652 Views
-
Last post by Coelacanth
-
- 1 Replies
- 14953 Views
-
Last post by GoMachV
-
- 3 Replies
- 2077 Views
-
Last post by Momo5
-
- 2 Replies
- 967 Views
-
Last post by terex
-
- 3 Replies
- 1108 Views
-
Last post by klavy69
Who is online
Users browsing this forum: No registered users and 29 guests