Tamiya "BLACKFOOT" build
- THE H.P FREAK
- Approved Member
- Posts: 1000
- Joined: Thu Nov 18, 2010 8:12 pm
- Location: Windsor, Ontario, Canada
- Been thanked: 3 times
Tamiya "BLACKFOOT" build
HI!... As lately I have accumulated a lot of Blackfoot parts. So I decided to start to built one the way it would of been back in 1986.
I just ordered a set of NIP roll bars and front windshield. I got the decals on tonight. I'll post some pics later. I still need the black plastic cover that goes over the servos and I need to find a set of original yellow wheels for it.
I just ordered a set of NIP roll bars and front windshield. I got the decals on tonight. I'll post some pics later. I still need the black plastic cover that goes over the servos and I need to find a set of original yellow wheels for it.
102 RC vehicles and counting...
-
- Approved Member
- Posts: 222
- Joined: Sun Nov 28, 2010 10:11 pm
- Location: Western NY, USA
- Been thanked: 2 times
Re: Tamiya "BLACKFOOT" build
Great work ... but before you put on those new decals, why do you think that the black paint went on so powdery? I see that you sanded it down and prepped with primer, so I am wondering what happened with the last step.
Was it really cold when you were painting it, or maybe the can was too far from the body making it semi-dry by the time it hit the surface? I'm just worried that the decals are not going to lay smooth on the painted surface because of the irregularities, and after all the effort of bringing this thing back to life, it would be a shame to have air-bubbly decals...
Was it really cold when you were painting it, or maybe the can was too far from the body making it semi-dry by the time it hit the surface? I'm just worried that the decals are not going to lay smooth on the painted surface because of the irregularities, and after all the effort of bringing this thing back to life, it would be a shame to have air-bubbly decals...
- THE H.P FREAK
- Approved Member
- Posts: 1000
- Joined: Thu Nov 18, 2010 8:12 pm
- Location: Windsor, Ontario, Canada
- Been thanked: 3 times
Re: Tamiya "BLACKFOOT" build
HI!... Well the previous owner of the body had like 5 layers of paint on it. The body was 100% mint so I didn't want to take the chance of wrecking it with any kind of paint stripper. They tend to eat plastic. So I put the body and it's parts in my fine glass bead cabinet. Did a great job of removing all the layers of paint but left the body slightly textured. I used TESTORS paint designed for that body. I'm no newb when it comes to using a spray can. It even has two coats of clear lacquer over all the paint. It's actually quite smooth. The camera is just making it look rough. The decals are sticking fine. No bubbles.
102 RC vehicles and counting...
- THE H.P FREAK
- Approved Member
- Posts: 1000
- Joined: Thu Nov 18, 2010 8:12 pm
- Location: Windsor, Ontario, Canada
- Been thanked: 3 times
-
- Approved Member
- Posts: 222
- Joined: Sun Nov 28, 2010 10:11 pm
- Location: Western NY, USA
- Been thanked: 2 times
-
- Approved Member
- Posts: 138
- Joined: Tue Oct 12, 2010 10:14 am
- Location: NE,PA
Re: Tamiya "BLACKFOOT" build
Oooh Aaahh... It looks great! That is one of my favorite trucks.
Are you going to run it, or is it a shelf queen?
Lynn
Are you going to run it, or is it a shelf queen?
Lynn
- THE H.P FREAK
- Approved Member
- Posts: 1000
- Joined: Thu Nov 18, 2010 8:12 pm
- Location: Windsor, Ontario, Canada
- Been thanked: 3 times
Re: Tamiya "BLACKFOOT" build
HI!... Its going to be a shelf queen. I have 3 other I need to get more parts for and put together. I might turn one of the 3 into a Super Beetle. Then one of the other Blackfoots will be a runner. I have a NIP Thorp diff I need to put in something. lol!
102 RC vehicles and counting...
- airdreams1
- Approved Member
- Posts: 127
- Joined: Fri Jul 02, 2010 5:51 pm
- Location: Boise, ID
Re: Tamiya "BLACKFOOT" build
Dang you have been on a Tamiya buying frenzy! got some cool cars. This thing is looking good.
I was rying to get 1 of everything (that I like) but now bills are in the way & Ihave to sell off some projects & forget that Idea for a few more years.. Maby when im 50 Ill try again.
I was rying to get 1 of everything (that I like) but now bills are in the way & Ihave to sell off some projects & forget that Idea for a few more years.. Maby when im 50 Ill try again.
- MelvinsArmy
- Approved Member
- Posts: 3224
- Joined: Tue Feb 07, 2006 10:22 pm
- Location: Des Moines, IA
- Been thanked: 8 times
Re: Tamiya "BLACKFOOT" build
I wouldn't bead/glass/sand blast any plastic body. Like you said, it left you with a texture. If you dip the body in brake fluid the paint will come right off and you'll have a perfectly smooth plastic surface to work with.
- victor_cathedral
- Approved Member
- Posts: 152
- Joined: Thu Feb 03, 2011 6:40 pm
- Location: usa, illinois
Re: Tamiya "BLACKFOOT" build
i kind of like the look that gave, adds a sort of 'scale-ism' to the truck, unique
- Diggley
- Approved Member
- Posts: 1166
- Joined: Wed Jan 28, 2009 5:44 pm
- Location: is everything...
- Been thanked: 8 times
Re: Tamiya "BLACKFOOT" build
MelvinsArmy wrote:I wouldn't bead/glass/sand blast any plastic body. Like you said, it left you with a texture. If you dip the body in brake fluid the paint will come right off and you'll have a perfectly smooth plastic surface to work with.
I've had good results with "Easy Off" too.
Projects and shelfers:
Late Edinger, RC10B2, Dual Sport, GT, Kyosho Turbo Ultima, Triumph, Tamiya Sand Scorcher, Blackfoot/Monster Beetle, '67 Beetle, Nikko Rhino, Traxxas Fiero, Slash, Hand-built Dune Buggy..all on here somewhere...
Late Edinger, RC10B2, Dual Sport, GT, Kyosho Turbo Ultima, Triumph, Tamiya Sand Scorcher, Blackfoot/Monster Beetle, '67 Beetle, Nikko Rhino, Traxxas Fiero, Slash, Hand-built Dune Buggy..all on here somewhere...
Re: Tamiya "BLACKFOOT" build
Where did you find a front windshield? I recently got a Blackfoot from Ebay that I'm also restoring. Front windshield was cracked and the sunroof missing, I'm also missing the black chasis cover and the battery compartment pin. Any idea of where to find these items without costing a fortune?
- THE H.P FREAK
- Approved Member
- Posts: 1000
- Joined: Thu Nov 18, 2010 8:12 pm
- Location: Windsor, Ontario, Canada
- Been thanked: 3 times
Re: Tamiya "BLACKFOOT" build
HI!... I got mine either from E-bay or from other RC sites.
http://cgi.ebay.com/Tamiya-King-Blackfoot-B-Parts-9005350-New-/200609144390?pt=Radio_Control_Parts_Accessories&hash=item2eb53c9e46
http://cgi.ebay.com/Tamiya-Blackfoot-Monster-Beetle-Servo-Chassis-Cover-/190532440973?pt=Radio_Control_Parts_Accessories&hash=item2c5c9e538d
http://cgi.ebay.com/DRIVER-TAILGATE-PARTS-Blackfoot-Super-RC-Tamiya-0005441-/350464011551?pt=Radio_Control_Parts_Accessories&hash=item5199486d1f
http://cgi.ebay.com/Tamiya-Blackfoot-Plastic-Cover-speed-control-/310319407646?pt=Radio_Control_Parts_Accessories&hash=item48407a621e
http://cgi.ebay.com/Tamiya-King-Blackfoot-B-Parts-9005350-New-/200609144390?pt=Radio_Control_Parts_Accessories&hash=item2eb53c9e46
http://cgi.ebay.com/Tamiya-Blackfoot-Monster-Beetle-Servo-Chassis-Cover-/190532440973?pt=Radio_Control_Parts_Accessories&hash=item2c5c9e538d
http://cgi.ebay.com/DRIVER-TAILGATE-PARTS-Blackfoot-Super-RC-Tamiya-0005441-/350464011551?pt=Radio_Control_Parts_Accessories&hash=item5199486d1f
http://cgi.ebay.com/Tamiya-Blackfoot-Plastic-Cover-speed-control-/310319407646?pt=Radio_Control_Parts_Accessories&hash=item48407a621e
102 RC vehicles and counting...
- Coelacanth
- Approved Member
- Posts: 7350
- Joined: Thu Jul 29, 2010 6:20 pm
- Location: Alberta, Canada
- Has thanked: 16 times
- Been thanked: 270 times
Re: Tamiya "BLACKFOOT" build
Sanding and primering isn't even half the battle if you're trying to go for a smooth, glossy finish. The reason why the paint job ended up with the orange-peel texture (which always happens unless you do the post-paint elbow grease) is because it wasn't wet-sanded and rubbed down with rubbing and polishing compound after the paint.shirochanwrx wrote:Great work ... but before you put on those new decals, why do you think that the black paint went on so powdery? I see that you sanded it down and prepped with primer, so I am wondering what happened with the last step.
A rattle-can paint-job, even with several coats of clear, will always appear like this unless you painstakingly wet-sand with progressively finer grit sandpaper, starting with 400, and then 600, 800, 1000 and 1500 grit, then follow that up with rubbing compound, and then lastly, a polishing compound. You could then apply a wax just for protection & shine after giving the paint a week to cure.
I attached a few pics of a mouse I modded 6 or 7 years ago. It started out with a fine-textured finish very similar to what you get after a rattle-can paint-job. After I wet-sanded and rubbed it down/polished it, you can see the difference--but it's several hours more work, for sure.
Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
- THE H.P FREAK
- Approved Member
- Posts: 1000
- Joined: Thu Nov 18, 2010 8:12 pm
- Location: Windsor, Ontario, Canada
- Been thanked: 3 times
Re: Tamiya "BLACKFOOT" build
HI!... Actually if you would of read the entire thread you would of seen that the truck body was glass beaded due to it had several coats of paint on it from the previous owner. I didn't want to take the chance of ruining the body by using a paint stripper. Some strippers soften or melt plastic.
102 RC vehicles and counting...
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 2899 Views
-
Last post by TokyoProf
-
- 10 Replies
- 1997 Views
-
Last post by Rider400
-
- 11 Replies
- 2189 Views
-
Last post by WhoKnowsWho
-
- 9 Replies
- 1976 Views
-
Last post by graemevw
-
- 16 Replies
- 7094 Views
-
Last post by MOmo
-
- 10 Replies
- 2660 Views
-
Last post by coxbros1
-
- 32 Replies
- 2778 Views
-
Last post by CNA75
-
- 10 Replies
- 1191 Views
-
Last post by Mazdaj
Who is online
Users browsing this forum: No registered users and 25 guests