The Official "What is it?" Thread

[Coelacanth]

I'm thinking it's for a truck too, I just don't recall ever seeing that style of wheel before, in aluminum. They look great!

[hugger19]

can anyone tell from the bottom of the chassis. i know its an hpi i think its an rs4 but not sure. going to sell it so i need to know what it is. thanks.

[njdriver04]

I had one just like that and I wanna say that someone pointed me towards the f1 style of cars where I found a match...which one I can't remember but its a place to start looking.
Todd

Don pm'ed me and said it might be 1/8 scale, when I compared it to a road wizard wing it was significantly bigger.

Just tryin to jog your memory. You have a ton of posts, (is there a way to use the search function, to search all your posts within this thread?)

[SFC K]

can anyone tell from the bottom of the chassis. i know its an hpi i think its an rs4 but not sure. going to sell it so i need to know what it is. thanks.

DSCN4072.jpg

That is an HPI RS4 2. What catches my eye though is that homemade exhaust outlets.

[hugger19]

lol i made those. it runs good but havent driven it in 2 years so its time to go.

[THUNDERSTRIKE1]

lol i made those. it runs good but havent driven it in 2 years so its time to go.

He has this thing for playing with rubbers!!! don

[Bong024]

What is it???

[romulus22]

Kyosho Inferno 10

[Bong024]

ahh thank you. weird i picked it up with a bunch of AE stuff. Now i know why i didn't recognize it. Thank you sir.

[Incredible_Serious]

Got some more for you gurus to ID, from my most recent lot:

1. Lexan driver figure: I'm thinking 1/8 scale, top of cockpit is 12cm or about 4 1/2" square. Has five round gauges in dash, fire extinguisher, and a separate lexan set of v8 velocity stacks / trumpets.

2. Small Delta and Associated parts:
- Delta 2483
- Delta WR 10 (washers)
- Associated no.4338
- Associated no.4360

3. Texxon Model accessories 'bits': Looks like four rubber shock diaphragms / outer covers, 7cm or about 3" long and about 2cm or just under an inch in diameter.

WhatIs1.JPG (88.3 KiB) Viewed 1022 times

WhatIs1.JPG (88.3 KiB) Viewed 1022 times

Any help very muchly appreciated......

Alex

[transamman908]

Associated #4360 is for a RC12L and is the bearing mount for the rear wheel/diff. spacer
Associated #4338 is for a RC10L

[Incredible_Serious]

Associated #4360 is for a RC12L and is the bearing mount for the rear wheel/diff. spacer
Associated #4338 is for a RC10L

Thanks mate.... will put them in the Associated onroad pile.....

Alex

[8valve]

Delta 2483 are body posts that thread into the cross bar that's supported by the wingtubes on early CK760/780 pancars.
Look closely, you'll see it on the rear of this car.

[Incredible_Serious]

Delta 2483 are body posts that thread into the cross bar that's supported by the wingtubes on early CK760/780 pancars.
Look closely, you'll see it on the rear of this car.

Thanks 8valve, I probably wouldn't have gotten that for quite a while......

Well, that's almost everything..... just the lexan driver figure and the shock 'socks' left.

Thanks guys.

Alex

[CAT3K]

Ok, it's a Schumacher part But for what? I've never seen one and neither can I find it in any manuals I have. It's about the diameter of a motor and about 6mm thick (maybe it is a motor spacer?)



Paul.