Please help support RC10Talk.com!
Donate towards my web hosting bill!
Any contribution helps!!

Parma Euro Panther project - Chris Arnold special

The place to go when it doesn't fit anywhere else..

Moderator: shodog

V12
Approved
Posts: 960
Joined: Thu Mar 31, 2011 11:53 pm
What was your first real rc car?: Mardave 1/12th
Location: EU

Re: Parma Euro Panther project - Chris Arnold special

Post by V12 » Mon Feb 27, 2017 7:30 pm

Red wheels added also. Rear wheels use 5-40 screws as early Associated RC12E wheels. So regular steel screws are used, no aluminium screws.
For the front wheels I found regular ball bearings don´t work. Parma front wheels need much smaller 1/4" OD bearings. :(
This means the project will stop here.
Attachments
chas-28.jpg

V12
Approved
Posts: 960
Joined: Thu Mar 31, 2011 11:53 pm
What was your first real rc car?: Mardave 1/12th
Location: EU

Re: Parma Euro Panther project - Chris Arnold special

Post by V12 » Mon Feb 27, 2017 7:32 pm

Final picture for the moment.
Attachments
chas-29.jpg

User avatar
camlchris
Approved
Posts: 316
Joined: Wed Sep 23, 2009 1:26 pm
What was your first real rc car?: tamiya
Location: Hong Kong

Re: Parma Euro Panther project - Chris Arnold special

Post by camlchris » Tue Feb 28, 2017 7:28 am

V12 wrote:
Mon Feb 27, 2017 2:22 pm
At some point I mentioned I will keep with white color scheme for most of the plastic parts but there will be red parts also.
OK this now where the special red parts will be added.
The Red wheels are rare . Most of time, I see them in yellow.

V12
Approved
Posts: 960
Joined: Thu Mar 31, 2011 11:53 pm
What was your first real rc car?: Mardave 1/12th
Location: EU

Re: Parma Euro Panther project - Chris Arnold special

Post by V12 » Tue Feb 28, 2017 8:48 am

I think Parma wheels are hard to find anyway but the red wheels were not sold. These were dyed red by Chris Arnold and just used by him.

User avatar
Jirka
Approved
Posts: 805
Joined: Mon Feb 23, 2009 1:40 pm
What was your first real rc car?: Tamiya Subaru Brat
Location: Finland

Re: Parma Euro Panther project - Chris Arnold special

Post by Jirka » Tue Feb 28, 2017 1:32 pm

This Parma car has odd place for rear body mounts, since they are in "moving part"= in rear suspension. This requires a little bigger body mounting holes to rear that allows the rear end to "live".

The Parma modified dry magnet motor is a little different than those I have seen before. The sticker and it's placement (90-degrees rotation) are a different then e.g. here:
Parma modified.JPG
Parma modified.JPG (13.8 KiB) Viewed 417 times
The car looks really really nice and clean. I hope You find these front wheel bearings soon!

Jirka

V12
Approved
Posts: 960
Joined: Thu Mar 31, 2011 11:53 pm
What was your first real rc car?: Mardave 1/12th
Location: EU

Re: Parma Euro Panther project - Chris Arnold special

Post by V12 » Tue Feb 28, 2017 1:57 pm

Jirka
Thanks for your comment. Glad you like the car.

Well you have to see this is a 1984 car so not that much younger than a RC12i and before the RC12L. The Delta car was way ahead of it´s time.
But maybe the reason was, the Parma rear pod had to be used and the whole car should look similar to existing Parma cars. This was one of the tasks when Chris was allowed making his own car.

The motor is a factory motor, not production I think. So anything could be different. I know a lot of factory motors (any brand) came without stickers.

Yes I found a source for such bearings, hope to receive soon.

User avatar
Jirka
Approved
Posts: 805
Joined: Mon Feb 23, 2009 1:40 pm
What was your first real rc car?: Tamiya Subaru Brat
Location: Finland

Re: Parma Euro Panther project - Chris Arnold special

Post by Jirka » Tue Feb 28, 2017 4:06 pm

How is the T-bar mounted to the chassis? Is there e.g. washers between them or does all T-bar flex come from area between the damper post/chassis and motor pid?

Jirka

V12
Approved
Posts: 960
Joined: Thu Mar 31, 2011 11:53 pm
What was your first real rc car?: Mardave 1/12th
Location: EU

Re: Parma Euro Panther project - Chris Arnold special

Post by V12 » Tue Feb 28, 2017 4:38 pm

The t-bar is mounted directly to the chassis, no washers or o-rings. The t-bar doesn´t move at all just flexes behind the chassis edge. Exactly the same as with the Super Phaser. Chris told me in the beginning he wanted a floating t-bar similar to the Schumacher car but this didn´t work at all for this car. When he removed everything and mounted directly to the chassis the car was good.

V12
Approved
Posts: 960
Joined: Thu Mar 31, 2011 11:53 pm
What was your first real rc car?: Mardave 1/12th
Location: EU

Re: Parma Euro Panther project - Chris Arnold special

Post by V12 » Mon Mar 20, 2017 9:07 pm

Received the special bearings for the front wheels now. This size is very unusual.
Attachments
chas-30a.jpg

V12
Approved
Posts: 960
Joined: Thu Mar 31, 2011 11:53 pm
What was your first real rc car?: Mardave 1/12th
Location: EU

Re: Parma Euro Panther project - Chris Arnold special

Post by V12 » Mon Mar 20, 2017 9:25 pm

Front wheels mounted to the Parma Euro Panther Chris Arnold Special. This project is finished now. I decided not to continue with adding electronics beside the Parma Yokomo Ferrari motor, so details of chassis won´t be hidden.

Final picture also. Remember, this is a replica car using original parts. So could have been one of the cars built during prototype stage.
Attachments
chas-31.jpg

User avatar
Jirka
Approved
Posts: 805
Joined: Mon Feb 23, 2009 1:40 pm
What was your first real rc car?: Tamiya Subaru Brat
Location: Finland

Re: Parma Euro Panther project - Chris Arnold special

Post by Jirka » Tue Mar 21, 2017 3:04 pm

It is beautiful, much more than the sum of its parts.

Jirka

V12
Approved
Posts: 960
Joined: Thu Mar 31, 2011 11:53 pm
What was your first real rc car?: Mardave 1/12th
Location: EU

Re: Parma Euro Panther project - Chris Arnold special

Post by V12 » Tue Mar 21, 2017 10:02 pm

Thanks Jirka!
Glad you like that car. I think one of the reasons why that Euro Panther looks so special and beautiful are the red wheels.
They make a big difference, at least in my opinion.

Post Reply

Return to “Other Makes/Models”

Who is online

Users browsing this forum: No registered users and 2 guests