My Slash
-
- Approved Member
- Posts: 109
- Joined: Tue Jun 29, 2010 1:00 am
- Location: USA
- Been thanked: 13 times
My Slash
Lowered and looking like a nascar craftsman series racetruck.
It's got the velineon 3500kv brushless motor system.
It also has the pro-line suspension kit.
I started out with a 90-spur, 23-pinion.
Then went to 83/25......then 83/26.
Then I got some 7.4v 5000mAh lipos.
Then went to a 76-spur and a 28-pinion.
This was when I lowered it. I was pretty happy with that. I had to try really hard to get the truck to come "loose". It was cool, I could crank the wheel at full throttle and not lose it (usually).
Then I got a 31 tooth pinion....now I have to be a little more careful.
....but I refuse to run a wheelie bar.
I'm not racing this....I'm going for top-speed.
I have access to a nice big long parking lot that's usually empty on the weekends.
It's got the velineon 3500kv brushless motor system.
It also has the pro-line suspension kit.
I started out with a 90-spur, 23-pinion.
Then went to 83/25......then 83/26.
Then I got some 7.4v 5000mAh lipos.
Then went to a 76-spur and a 28-pinion.
This was when I lowered it. I was pretty happy with that. I had to try really hard to get the truck to come "loose". It was cool, I could crank the wheel at full throttle and not lose it (usually).
Then I got a 31 tooth pinion....now I have to be a little more careful.
....but I refuse to run a wheelie bar.
I'm not racing this....I'm going for top-speed.
I have access to a nice big long parking lot that's usually empty on the weekends.
-
- Approved Member
- Posts: 109
- Joined: Tue Jun 29, 2010 1:00 am
- Location: USA
- Been thanked: 13 times
Re: My Slash
Thanks, and yeah it's getting there. I have since cut the front fenders out (more) because the tires were rubbing.
It handles very well I think. As long as I don't have it going at top speed (with the 76/31 gears) I can crank the steering sharply without much fear of flipping it. It corners really good and tends to slide if your going too fast instead of flipping over. I was actually trying to flip it with the 76/28 gears and a 7.4v lipo and it would not budge.....well till it caught a crack in the asphalt anyways.
It handles very well I think. As long as I don't have it going at top speed (with the 76/31 gears) I can crank the steering sharply without much fear of flipping it. It corners really good and tends to slide if your going too fast instead of flipping over. I was actually trying to flip it with the 76/28 gears and a 7.4v lipo and it would not budge.....well till it caught a crack in the asphalt anyways.
Re: My Slash
Looks and sits just like Scott Douglas' real race truck. Its amazing how all the newer Pro 4/Pro 2 trucks sit so low. When the go over the jumps the suspension drops out like 2 feet. Its awsome to watch! I wish I could run my Super Stock class truck that low. Sure would corner alot better!
-
- Approved Member
- Posts: 109
- Joined: Tue Jun 29, 2010 1:00 am
- Location: USA
- Been thanked: 13 times
Re: My Slash
Thanks,
Believe it or not it can be run over dirt like this. Yes it gets stuck but not as bad as you would think. Jumping however.....would be a bad idea.
I have since gone to 3S lipo and a 35 tooth pinion. Also switched from running rustler fronts all the way around to rustler rears. I lose a little stance (width) but the tires look more realistic in the wheelwells/renders now.
I've pretty much got it going as fast as I dare now.
Believe it or not it can be run over dirt like this. Yes it gets stuck but not as bad as you would think. Jumping however.....would be a bad idea.
I have since gone to 3S lipo and a 35 tooth pinion. Also switched from running rustler fronts all the way around to rustler rears. I lose a little stance (width) but the tires look more realistic in the wheelwells/renders now.
I've pretty much got it going as fast as I dare now.
Re: My Slash
I love it,,now that i see your truck i think i might lower mine
84 rc10 Goldpan (project)
rc12 l4 (project)
Slash 4x4 vxl (sold)
Slash 4x4 vxl platine (sold)
Stampede 4x4 vxl (sold)
Exceed Mad warrior nitro <--GARBAGE (sold)
Crono Prima nitro (sold)
rc12 l4 (project)
Slash 4x4 vxl (sold)
Slash 4x4 vxl platine (sold)
Stampede 4x4 vxl (sold)
Exceed Mad warrior nitro <--GARBAGE (sold)
Crono Prima nitro (sold)
-
- Approved Member
- Posts: 109
- Joined: Tue Jun 29, 2010 1:00 am
- Location: USA
- Been thanked: 13 times
Re: My Slash
Wow, I have not visited this thread in a loooong time.
That truck as you see it, no longer exists. It has gone through 2 more incarnations, the last of which was very sucessfull. The stock frame was swapped with a stretched rustler frame (2 made into one long one). The end result was 74 mph.
The truck has since gone back to off-road duty (still with the long rustler frame).
Glad you liked it though, I had a lot of fun with that truck.
That truck as you see it, no longer exists. It has gone through 2 more incarnations, the last of which was very sucessfull. The stock frame was swapped with a stretched rustler frame (2 made into one long one). The end result was 74 mph.
The truck has since gone back to off-road duty (still with the long rustler frame).
Glad you liked it though, I had a lot of fun with that truck.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 34 Replies
- 3079 Views
-
Last post by carloco8
-
- 6 Replies
- 707 Views
-
Last post by vwjuice
-
- 6 Replies
- 847 Views
-
Last post by purpletimbo
-
- 26 Replies
- 2083 Views
-
Last post by bearrickster
-
- 20 Replies
- 1403 Views
-
Last post by y2kgtp
-
- 3 Replies
- 496 Views
-
Last post by soniccj5
-
- 0 Replies
- 457 Views
-
Last post by mugen69
-
- 2 Replies
- 601 Views
-
Last post by mugen69
Who is online
Users browsing this forum: Google Feedfetcher, Semrush [Bot] and 0 guests