A-Main Bullet Fwd 4ws RC10 conversion Tribute build
- GoMachV
- Approved Member
- Posts: 11156
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 743 times
- Been thanked: 2146 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
Two just as you drew, one at 7 for the susp mounts and one at 22 for the bumper
Gonna need some material laid up
Gonna need some material laid up
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- Phin
- Approved Member
- Posts: 2714
- Joined: Tue Feb 21, 2012 5:17 pm
- Location: NY²
- Has thanked: 59 times
- Been thanked: 162 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
Our guess was what 10 and 20?
A single kick-up like the other Bullet chassis you got would make things a lot easier. Also the flat chassis is easier to mount a Stealth trans on which someone is definitely going to want to do.
A single kick-up like the other Bullet chassis you got would make things a lot easier. Also the flat chassis is easier to mount a Stealth trans on which someone is definitely going to want to do.
- jwscab
- Super Member
- Posts: 6479
- Joined: Wed Jan 28, 2009 9:42 am
- Location: Chalfont, PA
- Has thanked: 10 times
- Been thanked: 434 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
yeah, that's kinda dumb. make one kick, and make the bumper out of kydex or lexan with the other angle bent into it. same result, way less work.
- GoMachV
- Approved Member
- Posts: 11156
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 743 times
- Been thanked: 2146 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
Thats my plan, zero kick g10 and caster shims, and add a kydex bumper
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- Phin
- Approved Member
- Posts: 2714
- Joined: Tue Feb 21, 2012 5:17 pm
- Location: NY²
- Has thanked: 59 times
- Been thanked: 162 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
I meant keep the bumper kick-up and lose the 7 degree kick-up for the arm mounts. It's looks like A-Main made the Bullets that way at one point so it's still "authentic".
- GoMachV
- Approved Member
- Posts: 11156
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 743 times
- Been thanked: 2146 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
Problem is still the 7* kick up material is custom so $$$
I do think 7* material would be cool to have tho, lots of 4wd cars could use it
I do think 7* material would be cool to have tho, lots of 4wd cars could use it
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- GoMachV
- Approved Member
- Posts: 11156
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 743 times
- Been thanked: 2146 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
Brian has some 10 degree on shapeways and I ordered a set. Now thinking about it they are reversed. Doh
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- GoMachV
- Approved Member
- Posts: 11156
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 743 times
- Been thanked: 2146 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
Got most of it together and happy. Hard to get those deltas on the car before they leak all over lol. I need to see if i can find a few rebuilds or at least "o-rings" or whatever they call em. I even had the servo they recommended, a 131sh. Still need rear tires, rear wheels, crp axles, and a speed control.
3° front camber, 7° rear, front toe out, rear toe in per the setup guide
3° front camber, 7° rear, front toe out, rear toe in per the setup guide
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- longboardnj
- Approved Member
- Posts: 1339
- Joined: Sun Jun 29, 2008 11:52 am
- Location: new jersey
- Been thanked: 2 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
so cool, almost looks like it could be set up fwd or rwd mid motor
- GoMachV
- Approved Member
- Posts: 11156
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 743 times
- Been thanked: 2146 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
Since I have an original now, and the tribute, I decided "why not build a runner" haha. Instead of trying to locate or have made a kickup chassis, I had Brian make up some reverse caster wedges to give me a little fake kickup. I'll probably shorten the nose a bit too. Jsou made up the servo mount brackets, much easier than making them out of Delrin or nylon. This is as far as I have got, I'll hopefully have a chance to make it a roller soon. One day it will run
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
too cool, can't wait to see it finished and running!
-
- Approved Member
- Posts: 263
- Joined: Wed Nov 06, 2013 8:01 am
- Location: Schwenksville, PA
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
Hurry up and produce a kit! I was going to run a Ten4 and ARP repro at 2016 VONATS but this one has my name all over it! I love these weird, goofy variations.
Seriously, I need a kit!
Seriously, I need a kit!
- GoMachV
- Approved Member
- Posts: 11156
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 743 times
- Been thanked: 2146 times
Re: A-Main Bullet Fwd 4ws RC10 conversion Tribute build
I wonder if they would make you run in 4wd
Kits won't be a problem, but I'd like to know it works first! If you and limestang want early kits I can work on a couple but you'll have to help work out any kinks!
Kits won't be a problem, but I'd like to know it works first! If you and limestang want early kits I can work on a couple but you'll have to help work out any kinks!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 1498 Views
-
Last post by LTO_Dave
-
- 38 Replies
- 4876 Views
-
Last post by templeofspeed
-
- 2 Replies
- 1160 Views
-
Last post by matt1ptkn
-
- 18 Replies
- 3403 Views
-
Last post by Lonestar
-
- 19 Replies
- 3884 Views
-
Last post by templeofspeed
-
- 20 Replies
- 2902 Views
-
Last post by GoMachV
-
- 2 Replies
- 959 Views
-
Last post by hugger19
-
- 47 Replies
- 9009 Views
-
Last post by johnekb
Who is online
Users browsing this forum: Ahrefs [Bot], DotNetDotCom.org [Bot] and 31 guests