My "very late" RC10 CE

General discussion, builds/restorations, etc...

Moderators: scr8p, klavy69

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

Well I purchased a "Radiolink R4EH-G Gyro Inside Receiver For RC4G Transmitter" from Bangood so I could just use that while sorting out broken cased one from HobbyKing.

Well I just found out HK is sending out an entire set- Rx and Tx as a replacement just because of that broken case. I was going to try to CA it anyways... So now I'll have 3 gyro Rxs and 2 Txs (with gyros), and still got the Associated one too.. Guess I need to build another RC10 to put an extra Rx in..
RC10 CE "late" with included Rooster ESC (#6014)

broodenburg
Approved Member
Posts: 299
Joined: Thu Feb 28, 2013 9:00 am
Location: Den Haag, The Netherlands
Has thanked: 35 times
Been thanked: 10 times

Re: My "very late" RC10 CE

Post by broodenburg »

no complaints about HK.

Still haven't decided to buy a new LIPO ? :wink:

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

I probably will eventually. I may wait till I actually have some ok weather to run the car though.
RC10 CE "late" with included Rooster ESC (#6014)

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

Have been doing some work on the 'ole RC10 the past few days.. Has been nice weather but pretty windy, so I haven't been flying my planes past several days, so I figured I'd start working on the RC10 again.

Got a TRAXXAS waterproof Rx box that bolted right in! Works great, but had to move antenna and cut a new antenna hole, No big deal.. but she's totally waterproof now which is cool. Gyro works great too. Now just need to replace the rear hubs and build the new upgraded shocks, and paint the body.


[youtube]6yiS4l6M0oI[/youtube]

[youtube]mimIeWQ5hdk[/youtube]

Already fixed camber link with more solid ball cup..

waterproof Rx box that bolts right up!
Image

Image

Image

Image

Image

Image

And I am going to solder on an XT60 connector to this batt and try it out..
Image
RC10 CE "late" with included Rooster ESC (#6014)

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

Did some speed runs with taller gearing and new tires yesterday.. She's quick!

[youtube]uqaee4SSPLU[/youtube]
RC10 CE "late" with included Rooster ESC (#6014)

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

So here's a speed run test on 3S 3300mah 65-130C pack..
same gears. 81-23

[youtube]8cr0Dm2_gAk[/youtube]
RC10 CE "late" with included Rooster ESC (#6014)

broodenburg
Approved Member
Posts: 299
Joined: Thu Feb 28, 2013 9:00 am
Location: Den Haag, The Netherlands
Has thanked: 35 times
Been thanked: 10 times

Re: My "very late" RC10 CE

Post by broodenburg »

Nice stuff! quick to! How are the tires holding up?

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

broodenburg wrote:Nice stuff! quick to! How are the tires holding up?
Yeah I think it is fast as hell. It doesn't come across on video though, in real life it is impressive, anda little scary. I wouldn't want to hit anything or anyone, or myself when it is trucking along at full speed.

Tires holding up pretty good so far! They are wrapped with duck tape though, and balanced, which probably helps. I am sure they will wear down soon though, I am beating the living **** out of them! LOL.. On rocks/ gravel, and pavement. Great tires though, will buy more, they seem to work great on all surfaces which is impressive.. Actually I already have another set, but will buy more than that.

Got gyro working better (correctly) with a mix.

[youtube]BWP8WNjHhp0[/youtube]
RC10 CE "late" with included Rooster ESC (#6014)

broodenburg
Approved Member
Posts: 299
Joined: Thu Feb 28, 2013 9:00 am
Location: Den Haag, The Netherlands
Has thanked: 35 times
Been thanked: 10 times

Re: My "very late" RC10 CE

Post by broodenburg »

loose pinion gear I hope ....

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

Nope!!
RC10 CE "late" with included Rooster ESC (#6014)

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

I forgot to upload this vid before I got all into my planes at beginning of summer...



[youtube]c35OTiOdscg[/youtube]
RC10 CE "late" with included Rooster ESC (#6014)

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

Dusk/ Dark Bash-Test vid

[youtube]j1r1udo_NBA[/youtube]
RC10 CE "late" with included Rooster ESC (#6014)

Chewbacca
Approved Member
Posts: 510
Joined: Sat Jun 24, 2006 6:41 am
Location: Herrenberg, Germany
Has thanked: 20 times
Been thanked: 48 times

Re: My "very late" RC10 CE

Post by Chewbacca »

Really nice project.

I liked the green bumper in combination with the green body.

What 5 spoke wheels are those? Since the HPI super stars (my favorite) have become rare and expensive, I am looking for alternatives.

Thanks, Tony
*** POWDER - KING ***

User avatar
BWX
Approved Member
Posts: 107
Joined: Fri Aug 27, 2010 10:15 am
Location: Upstate NY

Re: My "very late" RC10 CE

Post by BWX »

Chewbacca wrote:Really nice project.

I liked the green bumper in combination with the green body.

What 5 spoke wheels are those? Since the HPI super stars (my favorite) have become rare and expensive, I am looking for alternatives.

Thanks, Tony
Thanks! yeah this thing is bad ass now! LOL.


http://www.jcracingproducts.co.uk/wheels/rc10

Those are the wheels..
RC10 CE "late" with included Rooster ESC (#6014)

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • Rc10 Ce late with a few mods
    by Trackingz » » in RC10 Buggy Forum
    3 Replies
    893 Views
    Last post by Trackingz
  • My RC10 CE late restoration
    by Zac_F71 » » in RC10 Buggy Forum
    7 Replies
    2083 Views
    Last post by Zac_F71
  • Introduction by way of a late model RC10 build
    by Phin » » in RC10 Buggy Forum
    21 Replies
    3279 Views
    Last post by Phin
  • Nice late black rc10 worlds
    by mikea96 » » in RC10 Buggy Forum
    10 Replies
    1226 Views
    Last post by mikea96
  • custom Late Edinger Rc10 **finished project**
    by billetproofcustoms » » in RC10 Buggy Forum
    24 Replies
    3101 Views
    Last post by dragnse7en
  • saved from the closet: late 80's RC10 with vintage hop-ups
    by mk-Zero » » in RC10 Buggy Forum
    137 Replies
    19995 Views
    Last post by JK Racing
  • Mid Motor rc10 late model with a custom chassis
    by lowrydesign » » in RC10 Buggy Forum
    32 Replies
    3009 Views
    Last post by lowrydesign
  • Late Hello From UK
    by jaro » » in RC10Talk Welcome Center
    0 Replies
    540 Views
    Last post by jaro

Return to “RC10 Buggy Forum”

Who is online

Users browsing this forum: No User AvatarGoogle Adsense [Bot], No User AvatarTbot [Bot] and 24 guests