Custom RC10 B-stamp Build

General discussion, builds/restorations, etc...

Moderators: scr8p, klavy69

Post Reply
User avatar
teman
Approved Member
Posts: 894
Joined: Sun May 01, 2011 5:57 pm
Location: Upstate NY
Been thanked: 6 times

Custom RC10 B-stamp Build

Post by teman »

Here's my 2nd custom runner project, it's been a year in the making! It was quite the task finding all the new bits and putting it all together which is why it too soo long :oops: a BIG thanks to all of those here who helped with the parts for this 8) I have a body set ready to paint so that's next to do on the list. I'm hoping to drive it before winter, just need some cash for electronics. It will be an interesting drive, basically just a bit wider and longer than a B3, haha it's pretty much ready to kill 8)

I'll probably miss something in the list, but here's a quick rundown... new chassis set, B3 shocks with HG shock parts, RPM servo mounts, custom battery brace, front RPM truck conversion arms, RPM mount, 30 degree castor blocks, worlds steering arms, B3 axles, B3 rims, custom front shock tower, RPCS bell cranks, Lunsford B3 turnbuckles, worlds bulkhead, rear RPM truck conversion arms, 0 degree mounts, 3 degree hubs, B4 rear rims, custom shock tower, new transmission with b3 slipper and custom CVDs... Enjoy :mrgreen:

Image

Image

Image

Image
-Kevin

User avatar
Johnboy72
Approved Member
Posts: 713
Joined: Wed Sep 15, 2010 11:08 pm
Location: Waynesville, MO
Been thanked: 8 times

Re: Custom RC10 B-stamp Build

Post by Johnboy72 »

Looks good, where are you planning on running it?

User avatar
slotcarrod
Approved Member
Posts: 4415
Joined: Tue Nov 25, 2008 10:57 pm
Location: Calgary Alberta Canada
Has thanked: 1 time
Been thanked: 41 times

Re: Custom RC10 B-stamp Build

Post by slotcarrod »

Some cool bits on that chassis, should work well on the track!

User avatar
teman
Approved Member
Posts: 894
Joined: Sun May 01, 2011 5:57 pm
Location: Upstate NY
Been thanked: 6 times

Re: Custom RC10 B-stamp Build

Post by teman »

Thanks! Unfortunately this is technically ROAR illegal so no official racing. I knew that when I started building, but the a-arms are so cool I was compelled to see it through :D I was hoping the B4 wheels would narrow the rear enough, however it doesn't. If someone had a chassis with a narrowed rear, it would be legal. If anyone is wondering what the CVD's are, they're are Custom Works 7213 long bones with B4 Axles :mrgreen:

We run on our own track here that John (popboy905) and I built, one of these days I'll beat him - maybe :lol:

Image
-Kevin

popboy905
Approved Member
Posts: 204
Joined: Wed Apr 25, 2007 5:37 pm
Location: Binghamton, NY
Has thanked: 3 times
Been thanked: 10 times

Re: Custom RC10 B-stamp Build

Post by popboy905 »

Looking good, can't wait to check it on this weekend.

User avatar
marlo
Approved Member
Posts: 2071
Joined: Tue Jan 22, 2013 5:31 pm
Has thanked: 21 times
Been thanked: 21 times

Re: Custom RC10 B-stamp Build

Post by marlo »

Nice build, and great track!

User avatar
matt1ptkn
Approved Member
Posts: 910
Joined: Wed Dec 12, 2012 8:27 am
Location: Moundsville, WV
Has thanked: 80 times
Been thanked: 132 times

Re: Custom RC10 B-stamp Build

Post by matt1ptkn »

Very nice track.
Matt

Just a part of my RC collection: Matt1ptkn's Toys

"I wish there was a way to tell you're in the good old days, before you've actually left them."

User avatar
teman
Approved Member
Posts: 894
Joined: Sun May 01, 2011 5:57 pm
Location: Upstate NY
Been thanked: 6 times

Re: Custom RC10 B-stamp Build

Post by teman »

Thanks 8)

Managed to get the body done today minus the wing. I decided to do a Turbo Mirage for this :D used black & fluorescent yellow base backed with a little silver and then white. I did the pin-striping, window nets, and the custom numbers in black/ silver vinyl :mrgreen:

Love it, will have to do this scheme again :mrgreen:

Image
-Kevin

User avatar
jwscab
Super Member
Posts: 6479
Joined: Wed Jan 28, 2009 9:42 am
Location: Chalfont, PA
Has thanked: 10 times
Been thanked: 434 times

Re: Custom RC10 B-stamp Build

Post by jwscab »

Great paint!

User avatar
jbmeyer13
Approved Member
Posts: 174
Joined: Wed Jul 02, 2014 11:13 am
Location: NJ
Has thanked: 25 times
Been thanked: 11 times

Re: Custom RC10 B-stamp Build

Post by jbmeyer13 »

teman wrote:Thanks! Unfortunately this is technically ROAR illegal so no official racing. I knew that when I started building, but the a-arms are so cool I was compelled to see it through :D I was hoping the B4 wheels would narrow the rear enough, however it doesn't. If someone had a chassis with a narrowed rear, it would be legal. If anyone is wondering what the CVD's are, they're are Custom Works 7213 long bones with B4 Axles :mrgreen:

We run on our own track here that John (popboy905) and I built, one of these days I'll beat him - maybe :lol:

Image
I like that track! Looks like a real 'off-road" track. Where is it located upstate?

popboy905
Approved Member
Posts: 204
Joined: Wed Apr 25, 2007 5:37 pm
Location: Binghamton, NY
Has thanked: 3 times
Been thanked: 10 times

Re: Custom RC10 B-stamp Build

Post by popboy905 »

Killer job on the body!

User avatar
DennisM
Approved Member
Posts: 2403
Joined: Sun Feb 26, 2012 7:07 am
Location: Denmark
Has thanked: 30 times
Been thanked: 64 times

Re: Custom RC10 B-stamp Build

Post by DennisM »

X2 -

That body is really something.
Gone fishing

User avatar
RC10resto
Super Member
Posts: 2914
Joined: Tue Sep 09, 2008 2:26 am
Location: Los Angeles, CA
Has thanked: 999 times
Been thanked: 396 times

Re: Custom RC10 B-stamp Build

Post by RC10resto »

Are your rear arm mounts on the correct side :?: (L&R)

User avatar
RichieRich
Approved Member
Posts: 2349
Joined: Wed Jun 14, 2006 11:42 pm
Location: Los Angeles, CA
Has thanked: 33 times
Been thanked: 19 times

Re: Custom RC10 B-stamp Build

Post by RichieRich »

Excellent work, amazing paint. You're not going to lose that one in the sprint to the corner.
Image

User avatar
teman
Approved Member
Posts: 894
Joined: Sun May 01, 2011 5:57 pm
Location: Upstate NY
Been thanked: 6 times

Re: Custom RC10 B-stamp Build

Post by teman »

RC10resto wrote:Are your rear arm mounts on the correct side :?: (L&R)
You're right I think they're flipped, I thought they looked funny :oops: I'll have to fix that now before I forget.


Finished the matching wing today :D Overall, I really dig the silver mixed with the fluorescent, it makes it almost iridescent! I hope I didn't over do the layers and lay too much.

Image


EDIT: Thanks Brian, I fixed the mounts!
-Kevin

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • RC10 C stamp resto custom
    by RC4X4 » » in RC10 Buggy Forum
    23 Replies
    1552 Views
    Last post by RC4X4
  • My A Stamp RC10 resto-mod runner build.
    by SOS » » in RC10 Buggy Forum
    11 Replies
    2818 Views
    Last post by SOS
  • andy's rc10 buggy custom build
    by discgolfer72 » » in RC10 Buggy Forum
    15 Replies
    2314 Views
    Last post by discgolfer72
  • Full custom classic RC10 build
    by GRRacing » » in RC10 Buggy Forum
    5 Replies
    1435 Views
    Last post by GRRacing
  • 2016 Encino Velodrome RC10-L4 custom build
    by JK Racing » » in Associated On-Road Forum
    15 Replies
    2769 Views
    Last post by JK Racing
  • Fathers day A stamp build is done..
    by sschering » » in RC10 Buggy Forum
    3 Replies
    823 Views
    Last post by giggles
  • Custom built rc10 t Custom so far
    by 1966blacktubt » » in RC10 Truck Forum
    6 Replies
    1064 Views
    Last post by Jim85IROC
  • Help with ID of an RC10 A stamp
    by SoCalSnakeEyes » » in RC10 Buggy Forum
    14 Replies
    2464 Views
    Last post by SoCalSnakeEyes

Return to “RC10 Buggy Forum”

Who is online

Users browsing this forum: No registered users and 24 guests