Slotcarrod's Cliff Lett 91 Worlds Team Moo Build

General discussion, builds/restorations, etc...

Moderators: scr8p, klavy69

Post Reply
User avatar
slotcarrod
Approved Member
Posts: 4415
Joined: Tue Nov 25, 2008 10:57 pm
Location: Calgary Alberta Canada
Has thanked: 1 time
Been thanked: 41 times

Slotcarrod's Cliff Lett 91 Worlds Team Moo Build

Post by slotcarrod »

DSCN1036_zpshqjdtrfk.jpg
This is my 91 Worlds Cliff Lett Build

Sadly, Cliff Lett (The 91 Worlds winner of 4WD) was not able to make the 2WD A-Main due to some controversy. I will post the story later when I hear first hand from Cliff. Cliff Lett was one of the quickest drivers during the 91 Worlds, but there is little video or pictures of his 91 worlds car. So from two poor photos and some poor pit video footage, I will try to make a copy of his car.

Thanks to Niki and Jake, we can enjoy the car that AE never decided to produce. You can buy the conversion here: http://www.rc10talk.com/viewtopic.php?f=99&t=36418

I also recommend a donor white plastic RC10T, as you will need the transmission, shocks, most of the hinge pins, the bellcrank servo saver hardware, ballends, front aluminium axle from the later team version, bulkhead, battery box x 2, along with much of the other hardware.

Showing the assembled suspension. The parts we dyed using boiling tea until the correct tone is reached . The steering was kept bright white. The Lunsford retro turnbuckles can still be purchased direct from Lunsford as well as Ti hinge pins but I have yet to get mine.
DSCN0242_zps1ba621cb.jpg
The center bellcrank turnbuckle calls for a 1 inch but very few threads are holding the ball cup on, so I suggest a longer turnbuckle. EDIT: 1 inch is perfect with Bellcrank link = 38.5mm centre of ball cup to centre of ball cup.
DSCN0247_zps8662e27f.jpg
I am just using rere ballcups and they look great, but a trick that I have never seen posted on how to put small ballcups on turnbuckles, is to use the HPI 4 way wrench. It has a ballcup holder on one side and makes it easy to install without marring the cup with a pair of pliers.
DSCN0244_zps1d319151.jpg
DSCN0245_zps65dacd01.jpg

User avatar
SFC K
Approved Member
Posts: 1336
Joined: Tue Nov 30, 2010 9:24 pm
Location: Oakdale, MN
Has thanked: 47 times
Been thanked: 9 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by SFC K »

Those arms look pretty nice. I use the same method for installing links and ball ends too. It works pretty slick. :D
Jeff

User avatar
slotcarrod
Approved Member
Posts: 4415
Joined: Tue Nov 25, 2008 10:57 pm
Location: Calgary Alberta Canada
Has thanked: 1 time
Been thanked: 41 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by slotcarrod »

Modifying the rear bulkhead to Masami spec took quite a bit of careful cutting and grinding with a Dremel, but Cliff had a different cut than Masami.

Shown is a Masami cut rere bulkhead and a badly cut original that will make a perfect candidate for a Cliff version.
DSCN0246_zpsefa49777.jpg

User avatar
Niki
Approved Member
Posts: 522
Joined: Wed Nov 02, 2011 7:32 am
Location: Finland
Has thanked: 3 times
Been thanked: 36 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by Niki »

Topic subscribed... :)

User avatar
vintage AE
Approved Member
Posts: 3012
Joined: Fri Nov 14, 2008 1:47 pm
Location: Sunken Lake, Nova Scotia
Has thanked: 29 times
Been thanked: 35 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by vintage AE »

I had no idea you were going this hardcore with this build Rod, but knowing you, I should have known better. Detail, detail, detail... you are off to a great start apparently. The dye job looks the part.

I hope you can at least get 2 perspective on the body so it would be relatively easy to replicate.

Niki and Jake, I can't wait to order my set someday!

User avatar
uniquenamehere
Approved Member
Posts: 553
Joined: Tue Jun 07, 2011 6:34 am
Location: Ontario, Canada
Been thanked: 2 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by uniquenamehere »

Very cool build... I was thinking that this car would be an awesome one to create.

Really interested in the story why he wasn't in the A main too.

User avatar
slotcarrod
Approved Member
Posts: 4415
Joined: Tue Nov 25, 2008 10:57 pm
Location: Calgary Alberta Canada
Has thanked: 1 time
Been thanked: 41 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by slotcarrod »

uniquenamehere wrote:Very cool build... I was thinking that this car would be an awesome one to create.

Really interested in the story why he wasn't in the A main too.
Thank you guys.

You all know Marlo and I have a man crush on Cliff Lett, so it was only natural for me to do his car. Cliff should have been in the A-Main of 2WD. The story goes like this:

We have all watched the 91 Worlds video's and seen the wicked "surfs up" or Whoops section. During practice a few drivers were short coursing a section and using part of the grass. So for qualifying, the IFMAR officials said they would dock your fastest time if you used this section. In one of the qualifiers Cliff got squirrely in the surfs up and hit the grass briefly. The IFMAR officials all noticed this and saw that it did not give him any advantage and it was just a racing incident. However a certain "TEAM" complained to the officials and they were pressured to dock the time from his fastest qually. His time would have placed him third on the A main grid. He was never able to recover and only got in the B main. Cliff Lett at the time was the shoo in for 2wd. He had just 2 days before become 4wd world champion, and had been winning and TQ'ing races all year. Who knows what the outcome would have been if that "TEAM" had not protested.

Another interesting story during that event. Cliff almost did not make the 4wd main and become world champion. He was being a nice guy signing autographs, and was late to corner marshal. IFMAR docked his fastest time. The problem was the track had deteriorated and there was only one good qualifying rocket round, but Cliff pulled a rabbit out of his hat and was the ONLY one to qualify out side of the rocket round. Because of this IFMAR decided to allow track maintenance during each 2wd round to give other drivers a chance. Good call!

Anthony, I have enough shots of the body to get a good replica. 8)

User avatar
marlo
Approved Member
Posts: 2071
Joined: Tue Jan 22, 2013 5:31 pm
Has thanked: 21 times
Been thanked: 21 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by marlo »

Man crush :lol: I want....need to see more of this build :wink:

edwin pibal
Approved Member
Posts: 255
Joined: Mon Jul 14, 2008 5:24 pm
Location: Wellington, New Zealand
Has thanked: 1 time

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by edwin pibal »

I must confess, I too have the man crush.

my nix91 is also going to be a Cliff Lett edition too

there is two of us in Team Moo now ;)

ed
Hi, my name is Ed, and im a addict.

User avatar
GoMachV
Approved Member
Posts: 11156
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 743 times
Been thanked: 2146 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by GoMachV »

So… let's address the elephant in the room…


Will you be running a "no copies" sticker on the roof?

:mrgreen:
Attachments
image.jpg
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

User avatar
Phin
Approved Member
Posts: 2714
Joined: Tue Feb 21, 2012 5:17 pm
Location: NY²
Has thanked: 59 times
Been thanked: 162 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by Phin »

Just change the red slash through the circle with a check mark. :idea:

edwin pibal
Approved Member
Posts: 255
Joined: Mon Jul 14, 2008 5:24 pm
Location: Wellington, New Zealand
Has thanked: 1 time

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by edwin pibal »

hadn't seen that pic before.

is that defiantly Cliffs car ? I only remember the two types of paint job he ever had

ed
Hi, my name is Ed, and im a addict.

User avatar
vintage AE
Approved Member
Posts: 3012
Joined: Fri Nov 14, 2008 1:47 pm
Location: Sunken Lake, Nova Scotia
Has thanked: 29 times
Been thanked: 35 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by vintage AE »

I'm sorry Cliff, but if you are reading this somehow, that's the worst paint job I'm going to have to "copy" :P

Oh yeah, I'm doing a team moo scheme, never mind Cliff.

edwin pibal
Approved Member
Posts: 255
Joined: Mon Jul 14, 2008 5:24 pm
Location: Wellington, New Zealand
Has thanked: 1 time

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by edwin pibal »

that's three for the Moo!

Moo tastic!
Hi, my name is Ed, and im a addict.

Mark Westerfield
Approved Member
Posts: 340
Joined: Wed Apr 23, 2008 9:32 am
Location: Connecticut, USA
Has thanked: 11 times
Been thanked: 24 times

Re: Slotcarrod's 91 Worlds Team Moo Build

Post by Mark Westerfield »

Thats Rick Vehlow's white/red flame steath that Cliff Lett is holding with the "no copies" sticker on the top. Lett's car had his familier blue/large orange strip with yellow edge stripping/white front with "moo".

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “RC10 Buggy Forum”

Who is online

Users browsing this forum: No User AvatarTbot [Bot] and 30 guests