- '91 Stealth Masami replica -
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
- '91 Stealth Masami replica -
Here we go!
First of all I would like to warmly thank Jake and Nikki for their awesome research and very dedicated work and telented craftmanship that made this (and many others) build thread possible. Like mentioned earlier, you guys are costing me a fortune, but it's all good and beyond as I would never ever have imagined seeing one of these cars in person, owning one (at least an as-close-as-possible replica) is a dream coming to reality. So thank you for making this happening, you guys ROCK big time!
The kit from Jake is really top notch quality and mimics perfectly the original chassis (not sure I will be able to bring myself to break the top deck ).
NIX parts are really fantastic as well, I was able to order the complete kit when it was still available and will use the non-ball raced version of the steering bellcranks.
NIX parts will also get died (probably with Nespresso coffee, they deserve some luxury ) as soon as I can dedicate more time to the build.
So my plan here is to slowly collect and build a Masami replica up to the latest detail while using a minimal amount of re-re parts to stay as faithful as possible to the original. Obviously this will take a long time before I can collect all teh right parts and I will hence use parts that are close to the OE ones until I can source the correct ones. A few ones will be tough to find of course, the Yokomo ZD-107 WCS wing mounts, white Yokomo pre-load shock clips and 2.15" black Yok rims come to mind.
That being said I went down to the mancave yesterday and came back with a few hard-to-find parts already, many of them I had totally forgotten about! The true gems being the correct KO Propo PS-1001 FET servo, a pair of rear Yokomo copper springs and a bag of RPM white pre-load clips that will do the trick until I can find the Yokie ones.
I also found Team Suzuki rear adapters that will do until I can find back the Yokie TH-1 ones. I know I also have the correct TR-32 tires somewhere but need to source the front TF-330.
As you can see below I do have the TQ fron wheels and until I can find a pair of black ZC-825 rims, I will use a pair of pink ZC-835 of which I will trim the outer lips, drill holes and then die black.
Regarding electronics, I'm still unsure about the exact motor used by Masami, most probably either a T (11x3) or a M (13x2). The servo is the one mentioned above, but have no clue so far about the receiver and ESC. Investigation is going on.
I also placed a massive order for hardware yesterday that should arrive in the next weeks or so.
Let the picture talk for now...
Made a test fit of the top deck and front bulkhead as I noticed the three front holes in the kick-up were not exactly centered and was afraid of misalignment, but in the end eveything seems to be fine, like mentioned in another thread I really don't see the need to chamfer the top deck. I didn't notice any major stress and first positionned all the screws then screwed them all one by one.
Such a fast and torquy servo for its era!
First of all I would like to warmly thank Jake and Nikki for their awesome research and very dedicated work and telented craftmanship that made this (and many others) build thread possible. Like mentioned earlier, you guys are costing me a fortune, but it's all good and beyond as I would never ever have imagined seeing one of these cars in person, owning one (at least an as-close-as-possible replica) is a dream coming to reality. So thank you for making this happening, you guys ROCK big time!
The kit from Jake is really top notch quality and mimics perfectly the original chassis (not sure I will be able to bring myself to break the top deck ).
NIX parts are really fantastic as well, I was able to order the complete kit when it was still available and will use the non-ball raced version of the steering bellcranks.
NIX parts will also get died (probably with Nespresso coffee, they deserve some luxury ) as soon as I can dedicate more time to the build.
So my plan here is to slowly collect and build a Masami replica up to the latest detail while using a minimal amount of re-re parts to stay as faithful as possible to the original. Obviously this will take a long time before I can collect all teh right parts and I will hence use parts that are close to the OE ones until I can source the correct ones. A few ones will be tough to find of course, the Yokomo ZD-107 WCS wing mounts, white Yokomo pre-load shock clips and 2.15" black Yok rims come to mind.
That being said I went down to the mancave yesterday and came back with a few hard-to-find parts already, many of them I had totally forgotten about! The true gems being the correct KO Propo PS-1001 FET servo, a pair of rear Yokomo copper springs and a bag of RPM white pre-load clips that will do the trick until I can find the Yokie ones.
I also found Team Suzuki rear adapters that will do until I can find back the Yokie TH-1 ones. I know I also have the correct TR-32 tires somewhere but need to source the front TF-330.
As you can see below I do have the TQ fron wheels and until I can find a pair of black ZC-825 rims, I will use a pair of pink ZC-835 of which I will trim the outer lips, drill holes and then die black.
Regarding electronics, I'm still unsure about the exact motor used by Masami, most probably either a T (11x3) or a M (13x2). The servo is the one mentioned above, but have no clue so far about the receiver and ESC. Investigation is going on.
I also placed a massive order for hardware yesterday that should arrive in the next weeks or so.
Let the picture talk for now...
Made a test fit of the top deck and front bulkhead as I noticed the three front holes in the kick-up were not exactly centered and was afraid of misalignment, but in the end eveything seems to be fine, like mentioned in another thread I really don't see the need to chamfer the top deck. I didn't notice any major stress and first positionned all the screws then screwed them all one by one.
Such a fast and torquy servo for its era!
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- Minisforever
- Approved Member
- Posts: 135
- Joined: Wed Nov 27, 2013 2:12 pm
- Location: Flint mi
Re: - '91 Stealth Masami replica -
Subscribed! My plan was to break top brace too and since I live 45 mins away from freedom hill (91detroit worlds) I was planning on running it in the dirt there too. Track long gone but the dirt Is still there. I think it would be cool to have the same dirt on wheels and all. Anyways looking forward to your build, your stuff is always top notch.
- scr8p
- Administrator
- Posts: 16493
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 926 times
Re: - '91 Stealth Masami replica -
Masami used an M1c, the early one without the fuse. I would assume the receiver would be KO, but it was in a lexan case so it may be tough to identify. From pics i've seen, it seems like the plugs go in from the end. So i would say maybe a 285A, but that's just a guess.
It's good you already have one of those servos, you don't see them come up for sale very often.
It's good you already have one of those servos, you don't see them come up for sale very often.
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: - '91 Stealth Masami replica -
That's a pretty cool idea to source period correct dirt, could you send me pack through the mail?Minisforever wrote:Subscribed! My plan was to break top brace too and since I live 45 mins away from freedom hill (91detroit worlds) I was planning on running it in the dirt there too. Track long gone but the dirt Is still there. I think it would be cool to have the same dirt on wheels and all. Anyways looking forward to your build, your stuff is always top notch.
Thanks for the info Jason, I'll keep an eye open. Private investigation going on!scr8p wrote:Masami used an M1c, the early one without the fuse. I would assume the receiver would be KO, but it was in a lexan case so it may be tough to identify. From pics i've seen, it seems like the plugs go in from the end. So i would say maybe a 285A, but that's just a guess.
It's good you already have one of those servos, you don't see them come up for sale very often.
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: - '91 Stealth Masami replica -
Today I made some baby steps by sourcing more parts from the stash, had to really dig deep to find the following missing parts:
- front copper springs
- TH-1 rear adapters
- Reedy Mr. R's
- white nylon nuts for the rear axles
- a full lightly used set of the correct ball cups (the ones with a small hex portion)
- early Stealth gear cover without the ribs
I also died all the Shapeways parts in coffee and left the steering parts apart. Worked great!
While test fitting the steering rack I noticed the right bellcrank is a tad higher that the left one (see picture below). I will solve the problem by adding a few shims on top of the nut that attaches the steering post to the chassis.
I will need to buy a reamer for the king pins, does anyone know where to source one?
It's very convenient to have the Stealth bible at hand for reference
- front copper springs
- TH-1 rear adapters
- Reedy Mr. R's
- white nylon nuts for the rear axles
- a full lightly used set of the correct ball cups (the ones with a small hex portion)
- early Stealth gear cover without the ribs
I also died all the Shapeways parts in coffee and left the steering parts apart. Worked great!
While test fitting the steering rack I noticed the right bellcrank is a tad higher that the left one (see picture below). I will solve the problem by adding a few shims on top of the nut that attaches the steering post to the chassis.
I will need to buy a reamer for the king pins, does anyone know where to source one?
It's very convenient to have the Stealth bible at hand for reference
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: - '91 Stealth Masami replica -
Nice build as usual!
Even though the Mr R is not the correct motor, it will look perfect with the Mr R sticker removed. From what I have noticed, none of the team AE guys that ran Reedy, have any Mr labels. Mike Reedy used 3 digit numbers to keep track of each drivers motors. This was written in black Sharpie on a small white sticker. Though not 100% sure, I feel the three digit number was the same given by IFMAR to each chassis during tech. I think Masami would have been #304.
Watching keenly!
Even though the Mr R is not the correct motor, it will look perfect with the Mr R sticker removed. From what I have noticed, none of the team AE guys that ran Reedy, have any Mr labels. Mike Reedy used 3 digit numbers to keep track of each drivers motors. This was written in black Sharpie on a small white sticker. Though not 100% sure, I feel the three digit number was the same given by IFMAR to each chassis during tech. I think Masami would have been #304.
Watching keenly!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: - '91 Stealth Masami replica -
Now that you mention that it definitely rings a bell about the numbers being written on the motors and corresponding to the different drivers. Masami's car was indeed #304, but do you know what kind of winding his motor had? From the onformation I could gather so far, two other 4x2 AE drivers used a T (11x3) or a M (13x2). I would think he used a 11x3, but it's just a guess...slotcarrod wrote:Nice build as usual!
Even though the Mr R is not the correct motor, it will look perfect with the Mr R sticker removed. From what I have noticed, none of the team AE guys that ran Reedy, have any Mr labels. Mike Reedy used 3 digit numbers to keep track of each drivers motors. This was written in black Sharpie on a small white sticker. Though not 100% sure, I feel the three digit number was the same given by IFMAR to each chassis during tech. I think Masami would have been #304.
Watching keenly!
I might take off the Mr. R's label then or leave it as is. There are anyway many tiny details that I won't be able to mimic 100%.
In teh meantime, I kept on working a bit on the parts preparation and made some slow progress. Was able to build the front shocks with the 1/8" inside spacer, piston 1 and 35 shock oil. The infamous Green Slime was of course at the party
Then I used 4 Yokomo white spring rings (2 on each shock), the RPM pre-load clips (they will be replaced with Yokie ones eventually) and also added 1 internal square shock clip on each shock shaft. Sadly I don't have the early round ones that Masami used on his shocks but might consider buying the shock parts lot from Shapeways.
Then I also hacked a lightly used black motor plate and then filed and sanded the cut edge.
I also spent some time prepping the rear motor guard as it was only deanodized on the outer face.
Last but not least, I exchange PM's with Minisforever who advised me to use tea instead of coffee for yellowing the parts. I myself stopped the coffee process earlier as I could see the parts truning more brown than yellow. I might make a second attempt with tea instead. Stay tuned!
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- Seabass
- Business Member
- Posts: 1402
- Joined: Mon Jul 27, 2009 8:34 pm
- Location: Mississippi
- Been thanked: 12 times
Re: - '91 Stealth Masami replica -
Very nice work and attention to detail here. I have a feeling this one is going to turn out better then the one I built.
Jake
Jake
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: - '91 Stealth Masami replica -
What motor did Masami run? Most likely an 11 triple (MrT), but it is possible he ran a custom 10 triple.
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- scr8p
- Administrator
- Posts: 16493
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 926 times
Re: - '91 Stealth Masami replica -
Yesterday, I popped in the Gene Husting video that covered the 91 Worlds. In it, Mike Reedy is working on motors. Every motor in the tray he was working on had Mr. labels. Just throwing that out there....
- Minisforever
- Approved Member
- Posts: 135
- Joined: Wed Nov 27, 2013 2:12 pm
- Location: Flint mi
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: - '91 Stealth Masami replica -
Well that video contradicts what I was told. I wonder if the motors shown are for regular drivers? I noticed they had the 3 digits written in pen on the Reedy Ultra motor sticker. Did the top drivers have a separate white sticker?
Great information.
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: - '91 Stealth Masami replica -
One other thing I noticed is the end bell has the number written on the gold heat sink as well. Also, seems only one motor has a white label in Reedy's rack of motors.
Edit: I noticed Rory Cull and Craig Drescher both have hand written numbers on the Reedy Ultra sticker. So not sure who got the white labels?
In another photo on Gene's video, it clearly shows Chris Doseck putting sheets Mr stickers on the Ultra label. So who knows, and why change the Mr label? Maybe to throw off apposing teams? It's not like they were winding arms at the track! Would be nice if Ruffy was around to give some more insight!
Edit: I noticed Rory Cull and Craig Drescher both have hand written numbers on the Reedy Ultra sticker. So not sure who got the white labels?
In another photo on Gene's video, it clearly shows Chris Doseck putting sheets Mr stickers on the Ultra label. So who knows, and why change the Mr label? Maybe to throw off apposing teams? It's not like they were winding arms at the track! Would be nice if Ruffy was around to give some more insight!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
-
- Approved Member
- Posts: 36
- Joined: Thu Apr 11, 2013 7:58 pm
- Location: Florida
- Been thanked: 1 time
Re: - '91 Stealth Masami replica -
The hand written numbers are probably just inventory numbers. For big events, Mike would bring boxes of blank motors and pre-wound armatures. Based on whatever worked, he would assemble race motors at the track. It made more sense than bringing hundreds of built motors, and only using a fraction of them. The additional white label probably had the driver's name on it.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 551 Replies
- 65885 Views
-
Last post by LusBus
-
- 22 Replies
- 2384 Views
-
Last post by AndrewCooke
-
- 7 Replies
- 1877 Views
-
Last post by Phin
-
- 120 Replies
- 12551 Views
-
Last post by 59burst
-
- 25 Replies
- 6215 Views
-
Last post by mikea96
-
- 22 Replies
- 3833 Views
-
Last post by dldiaz
-
- 9 Replies
- 2014 Views
-
Last post by Number7
-
- 7 Replies
- 4010 Views
-
Last post by Vale
Who is online
Users browsing this forum: Google Adsense [Bot] and 29 guests