Ten4: the 4WD RC10 project
- GoMachV
- Approved Member
- Posts: 11218
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 780 times
- Been thanked: 2240 times
Re: Ten4: the 4WD RC10 project
There haven't been many sets of plastics ordered the way it sounds. Might be a lot of people doing their own stuff too
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
Re: Ten4: the 4WD RC10 project
I'm waiting for the parts to arrive , hopefully Tuesday. Then I'll start the fun of building the car. On a side note,have you guys been watching thread about ideas on how to strengthen the shape ways parts. Some people are talking about dipping the parts in a thin CA glue, uv glue, or even a epoxy resin. I'll be following the thread to see what might work the best for making the parts more durable.
-
- Approved Member
- Posts: 211
- Joined: Mon Oct 06, 2014 3:35 pm
- Location: Bensalem PA (just outside of Philly)
Re: Ten4: the 4WD RC10 project
Maybe I missed it - but where do we get the belt pullies and the belt? (In the us) - size and specs on what to order for both please...
Also, the front diff just uses a standard Stealth Diff Assembly correct?
Also, the front diff just uses a standard Stealth Diff Assembly correct?
-Mike
RC10T | Kyosho Lazer ZX - 55mph | Mid Motor RC10 Pan Car Conversion - 72mph | OIN RC10 spare/used parts build - 69mph | 4x4 MonsterT build
86 ascMcLaren Capri 5.0 | 86 Mustang SVO
mikemartinelli.com
My Shapeways Stuff
RC10T | Kyosho Lazer ZX - 55mph | Mid Motor RC10 Pan Car Conversion - 72mph | OIN RC10 spare/used parts build - 69mph | 4x4 MonsterT build
86 ascMcLaren Capri 5.0 | 86 Mustang SVO
mikemartinelli.com
My Shapeways Stuff
- GoMachV
- Approved Member
- Posts: 11218
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 780 times
- Been thanked: 2240 times
Re: Ten4: the 4WD RC10 project
Pulleys and idlers are available either via Robinson direct or thru me. The belts are from Amazon.com and vary with the wheelbase you decide on
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
-
- Approved Member
- Posts: 211
- Joined: Mon Oct 06, 2014 3:35 pm
- Location: Bensalem PA (just outside of Philly)
Re: Ten4: the 4WD RC10 project
There site sucks...don't see anytning...link please?GoMachV wrote:Pulleys and idlers are available either via Robinson direct or thru me. The belts are from Amazon.com and vary with the wheelbase you decide on
-Mike
RC10T | Kyosho Lazer ZX - 55mph | Mid Motor RC10 Pan Car Conversion - 72mph | OIN RC10 spare/used parts build - 69mph | 4x4 MonsterT build
86 ascMcLaren Capri 5.0 | 86 Mustang SVO
mikemartinelli.com
My Shapeways Stuff
RC10T | Kyosho Lazer ZX - 55mph | Mid Motor RC10 Pan Car Conversion - 72mph | OIN RC10 spare/used parts build - 69mph | 4x4 MonsterT build
86 ascMcLaren Capri 5.0 | 86 Mustang SVO
mikemartinelli.com
My Shapeways Stuff
- GoMachV
- Approved Member
- Posts: 11218
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 780 times
- Been thanked: 2240 times
Re: Ten4: the 4WD RC10 project
Only way to get them from Robinson is to call them or email them. They only take checks and only ship ups. That's why I started buying and reselling the parts for them but I haven't reordered since there hasn't been any demand.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
-
- Approved Member
- Posts: 263
- Joined: Wed Nov 06, 2013 8:01 am
- Location: Schwenksville, PA
Re: Ten4: the 4WD RC10 project
All my parts have been printed for a few days except for the tensioner base. One damn part is holding me up Only thing left to determine for me will be the battery mounting solution.
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Ten4: the 4WD RC10 project
Hi Guys,
My parts are getting closer, Sweeet!
http://wwwapps.ups.com/WebTracking/track?&track.x=Track&trackNums=1Z6W33506694306713
Cheers, Dave.
My parts are getting closer, Sweeet!
http://wwwapps.ups.com/WebTracking/track?&track.x=Track&trackNums=1Z6W33506694306713
Cheers, Dave.
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
- GoMachV
- Approved Member
- Posts: 11218
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 780 times
- Been thanked: 2240 times
Re: Ten4: the 4WD RC10 project
Oh wow lol! And it's coming ups? I had always heard ups triggers more fees? Any idea? I'm done with usps if I can be!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Ten4: the 4WD RC10 project
Hi guys,
I hope to have them by Wednesday, will just have to see how I go.
I have never had to pay any extra fees or taxes.
Cheers, Dave.
I hope to have them by Wednesday, will just have to see how I go.
I have never had to pay any extra fees or taxes.
Cheers, Dave.
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Ten4: the 4WD RC10 project
Hi Brian,
I have an order coming from Tower Hobbies next week as well,
so hopefully that means I will be able to post some updates for my build over the next few days.
Cheers, Dave.
I have an order coming from Tower Hobbies next week as well,
so hopefully that means I will be able to post some updates for my build over the next few days.
Cheers, Dave.
- CamplinP
- Approved Member
- Posts: 763
- Joined: Mon Aug 31, 2009 11:43 pm
- Location: Midwest Husker, USA
- Been thanked: 2 times
Re: Ten4: the 4WD RC10 project
I plan on it. Just need to re-read and figure out what to get and from where. Hopefully winter will allow more time to get in the basement and work on stuff.GoMachV wrote:Crazy, ever since Brian released the parts.. It's dead! Looks like we might have a limited edition conversion on our hands here!
The Fox, Falcon, 9 RC10s black/gold/graph, Optima Mid SE EXT, Losi XXXT, B3, B4, 3 T4s, Evader BX, Evader ST, Buggy Champ '09, Sand Scorcher '10, RC10T, RC10DS
- DMAT
- Approved Member
- Posts: 884
- Joined: Wed Mar 20, 2013 8:53 am
- Location: Baton Rouge, La
- Been thanked: 3 times
Re: Ten4: the 4WD RC10 project
since the link was burried another page I figured I'd repost it.
here is the link for the long wheel base timing belt
http://www.amazon.com/5973M6-Ametric%C2%AE-Rubber-Timing-Height/dp/B00HBWFOBK
according to Dan, the short wheel base belt has 191 teeth so here is a link for the shortened version from the same supplier as the other
http://www.amazon.com/5733M6-Ametric%C2%AE-Rubber-Timing-Height/dp/B00HBWEZRE/ref=sr_1_5?srs=8292421011&ie=UTF8&qid=1444061252&sr=8-5&keywords=191+teeth
I'll have a build thread for one of these once I get the money to buy everything. for now im just getting the parts that cant be ordered at any point in time.
@GomachV maybe give an update on the product pages about the next reorder so people can see how close it is to happening or what all is required for it to go through.
here is the link for the long wheel base timing belt
http://www.amazon.com/5973M6-Ametric%C2%AE-Rubber-Timing-Height/dp/B00HBWFOBK
according to Dan, the short wheel base belt has 191 teeth so here is a link for the shortened version from the same supplier as the other
http://www.amazon.com/5733M6-Ametric%C2%AE-Rubber-Timing-Height/dp/B00HBWEZRE/ref=sr_1_5?srs=8292421011&ie=UTF8&qid=1444061252&sr=8-5&keywords=191+teeth
I'll have a build thread for one of these once I get the money to buy everything. for now im just getting the parts that cant be ordered at any point in time.
@GomachV maybe give an update on the product pages about the next reorder so people can see how close it is to happening or what all is required for it to go through.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6 Replies
- 1276 Views
-
Last post by DaveM
-
- 21 Replies
- 4183 Views
-
Last post by amx73
-
- 208 Replies
- 17082 Views
-
Last post by hugger19
-
- 13 Replies
- 1426 Views
-
Last post by mk-Zero
-
- 10 Replies
- 4589 Views
-
Last post by lotus15racer
-
- 71 Replies
- 12820 Views
-
Last post by Lavigna
-
- 27 Replies
- 9504 Views
-
Last post by Lonestar
-
- 37 Replies
- 4594 Views
-
Last post by minimini
Who is online
Users browsing this forum: CommonCrawl [Bot], DotNetDotCom.org [Bot], Google Adsense [Bot], Semrush [Bot], Tbot [Bot] and 53 guests