All New RC10B3 Factory Team Build

[uniquenamehere]

Very nice! In for some updates

[erichevy]

Reminds me of my B3 blue metal build. Similar insanity.

I have a nice Andy's B3 body I bought for another B3 build still in the package if you are interested. Or you might be going all stock.

Yes sir... all stock with this one I decided to go with the stock B3 body vs the Factory Team body tho. I originally was going with yellow wheels too, but decided to go with the white Wide Body wheels instead. I think I finally have every part. Just need to find the time to build!

[erichevy]

Finally started my build. I'm following the manual step by step. Sure takes longer than I expected. It takes time to locate part numbers, take all these new parts out of the package, etc. It's been a fun night tho

[erichevy]

I'm about as far as I can go now. Almost finished it off! I started on the front shocks, only to discover that one shock body was packaged incorrectly many moons ago... Oh well. I'll start my eBay search for another correct shock body. Need a pinion gear before installing the motor too.

Until next time, enjoy some pics of today's progress.

[erichevy]

Found an brand new pinion in my parts box. Got the motor and gear cover mounted.

[erichevy]

Wing is done and body is trimmed and fitted. I have another front shock body ordered so hopefully I can get the front shocks built this week.

[littleVETTE]

sweet! you're doing a great job erich

[broodenburg]

Nice !

[erichevy]

I got around to building and installing the front shocks finally. Also picked up the correct "2 Hole" rear hubs. I'll change those out at some point.

[slotcarrod]

Just scrolling through the pics and was wondering about the rear hubs and at the end I see you fixed it! Nice build btw!

Any paint going on it? Box art? Masami TQ add is my favorite!

[erichevy]

Yeah, those 3 Hole hubs bothered me. Associated likes to change parts but keep the same part numbers! I plan to paint the body at some point... Probably my own take on box art. Thanks for the compliment too.

[mikea96]

Very nice i like it! Are you going to add electronics?

[shoman24v]

Looking good!

But I'd have all your tie rods point the same way. That way, they all adjust the same to go in or out.

[erichevy]

Very nice i like it! Are you going to add electronics?

I was thinking about it. If any come my way that is.... I had an original gold RC10 in the 80's. i wasn't around for the 90's or 2000's so I am not familiar with what was available during any of those time frames. I have a Novak 410-M5 ESC that is pretty nice but not sure if it would be correct for this car. I assumed it was a little older than the car.

[scr8p]

Being as though it's a factory team b3, I'd go with competition level electronics of the period. Not exactly sure when the FT came out, but I think you'd be good with an Lrp v7.1 or Quantum esc and Lrp phaser receiver combo.... with a Reedy Ti mod and some 3000 cells. Or a Novak Cyclone esc and XXL receiver.