rc10 buggy anti roll bar

Post by **Trackingz** » Mon Jul 27, 2015 1:04 pm

has some one got a link for anti roll bars rc10 or advice, photo, suggestions. Having been running on some flat grass tracks and indoors on carpet the buggy dose have a lot of roll would it benefit from a anti roll bar ?
regards veeza -Rc10 team and worlds buggys

Post by **jwscab** » Mon Jul 27, 2015 1:14 pm

the original short arm rc10 was designed to use a roll bar on the front and there are provisions in the rear as well.

the front roll bar is shown in the short arm manual, and parts are available.

the rear sway bar is very similar, and locates in the small provisions on the top of the rear bulkhead and projects outward to the rear with links tied to the rear arms.

parma had a completely adjustable kit at one time.
http://www.rc10talk.com/viewtopic.php?f=1&t=4352

I would bet you could probably improvise a rear sway bar kit from the B4 kit associated has.

Post by **RC104ever** » Mon Jul 27, 2015 9:12 pm

Here's a thread detailing what I did on the rear for mine using B4 parts:

http://www.rc10talk.com/viewtopic.php?f=35&t=27396

Post by **Trackingz** » Tue Jul 28, 2015 11:36 am

Coool perfect thank you for the feed back

RC10Talk - The Net's Largest Vintage R/C Community