Wide frotn end questions

[twisted]

what exactly do i need for a wide front end and is it legal width?

thanks , Geo

[GoMachV]

Are talking about the stock wide arms on a buggy? From a short arm to a long arm? Or are you talking about a worlds setup with a long arm and narrow bulkhead? Or the hot trick wide front end with short arms? There are a lot of variations, which one do you mean?

[yellowdatsun]

Welp, I have the truck front end, with truck arms, and can say it is NOT legal. And this is with flat faced wheels. Runs and jumps great though with the super long travel suspension! I don't race it though, just take it to the track for fun. If I were to race, I'd take my B4.

BUT, I'd be curious too to know how to get the longest arms on the front, and still be legal, just in case I were to race someday That said, if you run the truck front end, what arms are needed to remain legal, that *aren't* made by 3D printing?

[twisted]

Are talking about the stock wide arms on a buggy? From a short arm to a long arm? Or are you talking about a worlds setup with a long arm and narrow bulkhead? Or the hot trick wide front end with short arms? There are a lot of variations, which one do you mean?

i have a worlds-ish car. so im not coming from a classic. i want the wide arms (dynotech?) with a narrow bulkhead from a rc10t i believe but im not 100% sure but all has to be legal width.

thanks again.

[scr8p]

Dynotech arms and a truck nose is the exact same width as stock widetrack arms and a buggy nose.

[RC10th]

As long as it's under 250mm wide it's legal.

[yellowdatsun]

For reference, truck nose, truck arms, and flat faced wheels equals 270mm, so I'm WAY past the limit.

[twisted]

Dynotech arms and a truck nose is the exact same width as stock widetrack arms and a buggy nose.

but the geomitry is changed.

so if i bought the dynotech arms,a truck bulkhead an nose plate,shock tower and nose tubes i would be set? is this worth doing?

[jwscab]

this is what was sold as the RPM 'worlds' conversion for RC10 and there are benefits. many guys are running this setup ( or at least have built them)