Are the hinge pins on an RC10 the same if you're using Andy's arms? Also, is the Lunsford NIX 91 STEALTH RC10 Titanium Hinge Pin Kit the same pieces for a classic RC10? These are the sizes listed for the NIX kit --
2 - .124" x 1.017" (Outer Front)
4 - .124" x 1.145" (Outer Rear and Kingpin)
2 - .124" x 1.560" (Inner Front)
2 - .124" x 1.980" (Inner Rear)
22 - 1/8" E Clips
I'm building a shelfer and figured, what the hell, I'd do titanium hinge pins and turnbuckles. What kit # do I need to get? I checked out Tower but they list the B4 and SC10 and some others, but not sure if those have compatible lengths for my needs.
Last post
This link is dead. Does anyone have another lead on the RC10 hinge pin lengths?
Im trying to finish some builds and hoping someone here can tell me where to buy hinge pins and turn buckles for my RC10.Surely they are the same as some modern cars.I also need shock ends with the hex ball,ball studs and ends.So where do you guys...
I searched the site a bit but didn't find much. I was wondering if stock RC10 hinge pins are available still? I looked on the tower site but didn't find much too explanitory? Any help with part no's or sources would be much appreciated. I just got a...
Last post
thanks temple and scrape, that's exactally what I was hoping for!!!!
I'm searching for a 3.2mm = 0.125 diam hinge pin with a lenght of 1.03
I think that AE 6227 king pin is 1 , but that is a tad too short for my application.
I have in my boxes one hinge pin that meassures 1,03 in legth, but I do not know whats it...
Last post
Ha I found it!
Right before my eyes :roll: It's the outer front B2/B3 hinge pin.
Hey all,
I'm using SC10 caster and steering blocks for a custom build and I'm having some trouble finding hinge pins - or rod material to make them.
Apparently AE changed from 1/8 to 0.110 diameter sometime prior to the B4? Anyway, the set is...
Last post
I agree with the Porsche needing have the engine mounted in the rear. That's why i wanted to slide a DS chassis uunder a Porsche body...for the rear engine handling characteristics.
Now when i did the Pantera DS...i used a mid engine mounted...
Maybe this could interest some here so I thought it could be usefull to share my DIY custom hinge pins. I was tired off always having to search for the correct hinge pins for custom projects so came up with this idea of doing my own custom length...
Last post
You can also use .125 piano wire in a pinch (or whatever diameter $.59 wire your application needs), too.
Has anyone found a set of captured hinge pins that fit the outer hings pins on an RC10? Even with e-clips, one of mine fell off 3 times. I need a more permanent solution.
Last post
Yeh, they came up when searching google. I want a solution that does NOT include C clips.
There was such solution in the second thread. It also reduces some play:
For a runner I would use a set screw in the mount. Grind a bit of the hinge pin...
