Jwscab might be able to help? Jake is not around here much anymore.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
wasnt someone selling/making a L shaped bracket made out of carbon to mount the esc to the shock tower for the rc10's.... was it on evilbay?? i cant remember where i saw it.......
My new batteries are a little taller/thicker which prevents the stock holder from going all the way down to hold it. Any suggestions on a different bracket to hold it down? Not so excited about velcro.
Thanks
Last post
My new batteries are a little taller/thicker which prevents the stock holder from going all the way down to hold it. Any suggestions on a different bracket to hold it down? Not so excited about velcro.
So I just bought an old rc collection and got a big box of NIP vintage parts with it. I noticed when I bought it that there was a whole bunch of Hot Trick parts in it. I've been dying to find a set of front arms for one of my rc10's to match the...
Last post
I get it. I'm always trying to find vintage aftermarket hop ups for my cars. I had just never heard of this one. I guess I'll shelf the bracket in my parts collection until I come across one of those early mip's. You guys are always a wealth of info...
Building this, all chassis pieces are powder coated black and in nice shape all stainless steel hardware will be used basically it will be a stock appearing roller 20190127_151057.jpg 20190128_165933.jpg 20190127_151105.jpg
Last post
Lucky! I'm dying to find an early offset B stamp chassis like that for my 7001!
Been buying aftermarket aluminum parts here & there to build a new all metal GT, so far this is as far as I got 2nite.
Any advice or recommendations on this aluminum rebuild process is greatly appreciated.
Last post
It's all about gear ratio and carburator setup (top end mostly) if you don't want to fry your OS.
Funny as everyone says don't run it as it was going to be my first comment anyway. It sounds like you're really building the perfect shelfer, and the...
I am just curious and hope that one of the members either is in the know or might know someone in the know. Who does/did Custom Works body molds? Where they done by hand or by some sort of CNC process. I am curious as if you really think about the...
Last post
I am just curious and hope that one of the members either is in the know or might know someone in the know. Who does/did Custom Works body molds? Where they done by hand or by some sort of CNC process. I am curious as if you really think about the...