I am working on a project runner made of used and new parts...
The nose plate was damaged with the threads all stripped so the front plate does not hold without using a nut to hold the screws that go through the servo saver (see #1 on the picture)....
Last post
That's clever :shock: I'll try that... I may need longer screws but that may work...
I am building a team car and would like to know if anyone knows the part numbers to use the modern factory team tie rods. There is so many, i dont want to waist money trying. Has anyone used these?
Last post
The camber links, front and rear, are 1.75 (#1404), and the steering rods are 2 (#1406).
I'm looking for upgraded OG turnbuckles/tie rods for an original Composite Craft Predator Lynx (First Gen, not the TRC/CC Lynx2) but I don't know the exact lengths needed. I know...I know....if I have the car, just measure'em or remember'em :D Thing...
I'm considering some mods to hop up my Turbo Optima. Some of the things I've been looking into, researching fitment primarily by size, are the upper rods and tie rods. I've seen some nice anodized alloy rods made by 3rd-party manufacturers that...
Last post
why bother with those? just get some lunsford tie rods and ends. less slop that way!!
Got a link to something specific in the appropriate sizes? :?
Would I be able to use B4 tierods on an RC10 with the widened front world's RC10 Old is New build??
any help and/or suggestions are greatly appreciated... :D
Last post
when you build your car, mock it up with either threaded rod or used turnbuckles, and the ball cups you intend to use. measure the length, then buy what you need.
Hi. Im new to the site. I'm returning my goldtub back to a buggie and am going to restore it to somewhat stock. I don't wanna use the original turnbuckles and no one lists a set for these old RC10s. Does anyone have old part numbers from companies...
Last post
well, your not stuck using threaded rod. you could measure for the length you need and get some lunsford tierods. or, you could get the dubro 4-40 turnbuckles and cut them to the desired length. the dubros are threaded close to the hex.
So, here I am in the middle of my winter depression and I had a thought ... what if I built a runner using some of the stuff I've accumulated for what appears no reason? Something that is almost too fast to control ... Here's the result, so far ......
Last post
4 shure man i like it may b even love it hmmmmmm the chassi is the same as the one being raffeled in the general fourm i like it alot who makes it?
Which rod ends do you guys prefer for use on your vintage RC10s?
Anything I can simply click and buy to upgrade over the original ball and cup ends?
While we are here is there any other minor item like this worth upgrading before my new...
Last post
The Losi ones are pretty damn nice, the short RPM ones are my favorite, the JC and AE ones are garbage after the first time you take them off- super soft and flexible.