Yeah, AE discontinued that tower. I tried to order a bunch of cool stuff like that from AE a couple months ago and it was all discontinued. They are still making most of the basic parts for the old RC10's, but slowly the supply is drying up.
I'm looking at the parts to get an rc10 graphite together.
Looking at the 25 year thread and the manual I see the front shock tower is a 4 hole 6231, but the front shocks are listed as the 6449 listed as .56 on rc10.com.
Was there a running change...
Last post
the graphite Team car still had the 4 hole tower at first, so the graphite non team should have only had the 4 hole.
Rebuilding 2 losis(1 junior t converted to jrxt and a jrxpro se mix part buggy converted to a junior2), as of now they have junior2/t front shocktowers.Been trolling ebay for a deal on a graphite/fiberglass font tower but I'm not sure what works...
Last post
My heads spinning, got dizzy had to sit down. :lol: I have a few old towers here. Not sure what your looking for but if I can help, I will. thanks ,but don't stress about it. looking for a jrx2 or jrx pro SE front tower. ill pm you if I get in need...
Never seen these before (tried to search here also) - This came with a graphite I bought while ago and it looks too nice to be home made. It seems like stamped or cut and not machined or drilled. Has anyone seen like before?
Last post
I measured the thickness and it's only 0.8mm. Material is also ferromagnetic, so something iron based. Probably it's someone's one-off custom part - quite decent looking though. Not sure if I am going to use it either...
I'm starting to build my A&L chassis and want to do something a little different atleast. I have a buggy with what I believe is a A&L front shock tower for the RC10T. My question is, would it look alright on a A&L glass chassis kit?
Last post
Yeah, I thought it would help smooth out jumps a bit but this one will only do shelf duty. The buggy pictured though has a very interesting future I shall share soon ;).
Does anyone know what shock size I need to use with a A&L front tower :?:
A&L shock tower.JPG
it's not my photo, just the one from ebay
Last post
I have one still in the package and it says RC10 Long Front Shock Tower for all Rc10 & Kyosho Long Shocks part #2009 I would think it is for the long shock body and long shaft.
not sure if its been done or tested, but i found 4-5 at my LHS and decided to give it a try, comes out perfect. Bottom needs about .5 mm sanded off, and then just holes drilled to match.
Last post
just to clarify too, you will need to take like 1mm off the bottom of the XX plate otherwise it wont sit right on the RC10 noseplate, i used a belt sander for mine