Please help support RC10Talk.com!
Donate towards my web hosting bill!
Any contribution helps!!

Composite Craft RC10T - Dream Build

General discussion, builds/restos...

Moderator: scr8p

User avatar
lavigna
Approved
Posts: 257
Joined: Wed Aug 05, 2015 8:24 am
What was your first real rc car?: RC10-T
Location: Petaluma, CA

Composite Craft RC10T - Dream Build

Post by lavigna » Fri Jul 14, 2017 3:27 am

Composite Craft 10210 RC10T Pro Mod Double Decker Set. This is the version of the chassis I have wanted for a long time. I love the lines of both the lower deck, and upper deck, which extends all the way forward and mounts with a custom brace. I feel very fortunate to have found a chassis set, correct & matching F&R towers, and matching rectangular battery strap. All new condition.

A HUGE thanks to SofaKing for providing many of the parts that will make up this truck. I really appreciate all your help, and I look forward to seeing some of your upcoming builds. I hope this build does you proud.

Since this is the ultimate truck chassis, IMHO, the rest of the build needs to be top grade as well. I have nearly all the parts I am after. Currently, I am waiting on a hardware order, and then the build officially begins!

Here are some photos of the beautiful chassis and some assorted pieces. I am using MIP Lite Drives. I love how they are machined out, but I wanted to add some bling to them. They got the polish treatment. This took some work because of all the intricate surfaces. I hope this adds a little something special to these rare drives.

I will do my best to provide an interesting build thread. Opinions and suggestions are always welcome.
Attachments
Capture1.JPG
Capture2.JPG
Capture5.JPG
Capture7.JPG
Capture8.JPG
Capture3.JPG
Capture6.JPG
Last edited by lavigna on Sat Jul 15, 2017 2:43 am, edited 1 time in total.

DaveM
Super Member
Posts: 1069
Joined: Mon Mar 10, 2014 2:43 am
What was your first real rc car?: Team Associated RC10 T3 Factory Team
Location: Adelaide, Australia

Re: Composite Craft RC10T - Dream Build

Post by DaveM » Fri Jul 14, 2017 4:27 am

Nice, some really rare parts there!
Looking forward to watching your build.
:)

User avatar
Lonestar
Super Member
Posts: 3452
Joined: Wed Dec 12, 2007 10:17 am
What was your first real rc car?: MRC Bullit
Location: Switzerland, yannow, in Europe (or almost)

Re: Composite Craft RC10T - Dream Build

Post by Lonestar » Fri Jul 14, 2017 7:27 am

Image

OMG that's gonna be one sexy 10T here... :shock:

:D
Broken Pix Links? Blame greedy Photobocket... viewtopic.php?f=39&t=41908&start=45

User avatar
scr8p
Site Admin
Posts: 17388
Joined: Wed Feb 08, 2006 2:46 am
What was your first real rc car?: Tamiya Midnight Pumpkin
Location: Northampton, PA
Contact:

Re: Composite Craft RC10T - Dream Build

Post by scr8p » Fri Jul 14, 2017 1:12 pm

Gonna be a nice build. Gotta find a Composite Craft trans brace for it now (see pic below). :wink:

This will remind me a lot of this double deck team car I built many years back. I used the MIP outdrives and aluminum cvd's on that too. Also a Robinson Racing aluminum slipper.
IMG_1459.JPG

User avatar
jwscab
Life Saver
Posts: 5223
Joined: Wed Jan 28, 2009 2:42 pm
What was your first real rc car?: grasshopper
Location: Chalfont, PA

Re: Composite Craft RC10T - Dream Build

Post by jwscab » Fri Jul 14, 2017 2:40 pm

now that they are polished, be sure to wax 'em to keep 'em from rusting.

do you have the nose brace tube?

whats the plan for the arms?

User avatar
lavigna
Approved
Posts: 257
Joined: Wed Aug 05, 2015 8:24 am
What was your first real rc car?: RC10-T
Location: Petaluma, CA

Re: Composite Craft RC10T - Dream Build

Post by lavigna » Fri Jul 14, 2017 8:59 pm

scr8p wrote:
Fri Jul 14, 2017 1:12 pm
Gonna be a nice build. Gotta find a Composite Craft trans brace for it now (see pic below). :wink:

This will remind me a lot of this double deck team car I built many years back. I used the MIP outdrives and aluminum cvd's on that too. Also a Robinson Racing aluminum slipper.

IMG_1459.JPG
Nice car! As I understand it (with both car and truck CC chassis) there are 2 versions. I had been told the version you posted (where the top deck ends before the steering) is the older version. I don't know if that is correct though. I think both versions are very cool, but I have always been crazy for the second version. That is why I am so excited to get this chassis. I have heard my version of the chassis referred to as the World's or Pro version? Is this correct? There seems to be far fewer of this version in the truck chassis. If anyone has more information to share, that would be great.

User avatar
lavigna
Approved
Posts: 257
Joined: Wed Aug 05, 2015 8:24 am
What was your first real rc car?: RC10-T
Location: Petaluma, CA

Re: Composite Craft RC10T - Dream Build

Post by lavigna » Fri Jul 14, 2017 9:09 pm

jwscab wrote:
Fri Jul 14, 2017 2:40 pm
now that they are polished, be sure to wax 'em to keep 'em from rusting.

do you have the nose brace tube?

whats the plan for the arms?
I applied some SC1 to prevent rust but that is a good idea too.

For the transmission brace, I was planning on using either a RPM or Jconcepts brace. I didn't even know there was a CC transmission brace made. I may look into that.

The arms, spindles, carriers, rear carriers, transmission, gear cover, etc will all be RPM.

I have the standard nose brace tube, and a custom turned aluminum unit. All courtesy of SofaKing.
Attachments
Capture1.JPG

User avatar
SofaKing
Approved
Posts: 348
Joined: Tue Mar 20, 2007 10:26 pm
What was your first real rc car?: Tamiya Grasshopper then upgraded to an RC10!
Location: Glendale, CA

Re: Composite Craft RC10T - Dream Build

Post by SofaKing » Fri Jul 14, 2017 11:08 pm

lavigna wrote:
Fri Jul 14, 2017 3:27 am
A HUGE thanks to SofaKing for providing many of the parts that will make up this truck. I really appreciate all your help, and I look forward to seeing some of your upcoming builds. I hope this build does you proud.
No thanks necessary, I'm looking forward to seeing your interpretation. Those outdrives turned out fantastic!

Maybe someday I'll get around to doing some assembly :wink:

User avatar
jwscab
Life Saver
Posts: 5223
Joined: Wed Jan 28, 2009 2:42 pm
What was your first real rc car?: grasshopper
Location: Chalfont, PA

Re: Composite Craft RC10T - Dream Build

Post by jwscab » Sat Jul 15, 2017 12:11 am

Cool, nice build list. The aluminum brace looks familiar. :mrgreen:

User avatar
RC10resto
Super Member
Posts: 2802
Joined: Tue Sep 09, 2008 6:26 am
What was your first real rc car?: RC12e
Location: Los Angeles, CA
Contact:

Re: Composite Craft RC10T - Dream Build

Post by RC10resto » Sat Jul 15, 2017 3:48 am

it should :wink:
Brian

RC Gallery = viewtopic.php?f=77&t=28940

User avatar
lavigna
Approved
Posts: 257
Joined: Wed Aug 05, 2015 8:24 am
What was your first real rc car?: RC10-T
Location: Petaluma, CA

Re: Composite Craft RC10T - Dream Build

Post by lavigna » Mon Jul 17, 2017 5:31 am

Still awaiting the hardware order to arrive. However, I am still trying to decide which route to go on several areas.

Motor Plate - I have a new stock plate, and a new Jconcepts plate. I don't think the modern Jconcepts item will fit on this build well. However, I do not want to simply use a stock motor plate. I think I will cut it, and possibly add some custom milling work. I am just working out what lines I want to create on the back, and how they will flow into the rounded lower motor guard.

Shocks - This is a set of new, Team RC10T shocks. I am still unsure if I want to use these, or go with something more custom. Time will tell.

Tires - RED Pro 92 Fuzzie tires in the rear, and RED Pro 55 narrow front tires up front. Wheels are still undecided, but I am thinking as set of natural, Losi wheels (with the clear front covers) may look nice. I would need to modify the fronts, to bring their width to that of the AE skinny fronts. Any thoughts on this?

Much of the rest of the truck will be comprised of RPM parts. All new.
Attachments
Capture1.JPG
Capture3.JPG
Capture2.JPG
Capture5.JPG
Capture6.JPG
Capture4.JPG

DaveM
Super Member
Posts: 1069
Joined: Mon Mar 10, 2014 2:43 am
What was your first real rc car?: Team Associated RC10 T3 Factory Team
Location: Adelaide, Australia

Re: Composite Craft RC10T - Dream Build

Post by DaveM » Mon Jul 17, 2017 6:47 am

Go with the stock motor plate and modify it, the JConcepts looks too modern.
:)

User avatar
jwscab
Life Saver
Posts: 5223
Joined: Wed Jan 28, 2009 2:42 pm
What was your first real rc car?: grasshopper
Location: Chalfont, PA

Re: Composite Craft RC10T - Dream Build

Post by jwscab » Mon Jul 17, 2017 1:44 pm

I don't think you will be able to modify the losi front wheels to fit narrow tires.....

User avatar
lavigna
Approved
Posts: 257
Joined: Wed Aug 05, 2015 8:24 am
What was your first real rc car?: RC10-T
Location: Petaluma, CA

Re: Composite Craft RC10T - Dream Build

Post by lavigna » Mon Jul 17, 2017 5:21 pm

DaveM wrote:
Mon Jul 17, 2017 6:47 am
Go with the stock motor plate and modify it, the JConcepts looks too modern.
:)
I think you are right. Thanks.

Received the hardware order. I am using black anodized aluminum hardware. I'm going for the stealth, blacked out look. The 8-32 counter sunk screws I received do not fit flush on the chassis. I think I need the 100 degree instead of the 82 degree. Always something.

I'm messing around with customized the battery cup. Still not sure what I want to do.

Work on the motor plate is under way.
Attachments
Capture1.JPG
Capture4.JPG
Capture2.JPG
Capture3.JPG

User avatar
lavigna
Approved
Posts: 257
Joined: Wed Aug 05, 2015 8:24 am
What was your first real rc car?: RC10-T
Location: Petaluma, CA

Re: Composite Craft RC10T - Dream Build

Post by lavigna » Thu Jul 20, 2017 12:09 am

Finished the trimming of the motor and back plate. Still deciding if I should send them out to have them milled.
Attachments
Capture1.JPG
Capture2.JPG
Capture2.JPG (41.17 KiB) Viewed 40 times
Capture5.JPG
Capture4.JPG
Capture4.JPG (55.43 KiB) Viewed 40 times
Capture3.JPG
Capture3.JPG (57.13 KiB) Viewed 40 times

Post Reply

Return to “RC10 Truck Forum”

Who is online

Users browsing this forum: No registered users and 1 guest