Mostly Black RC10T.
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Mostly Black RC10T.
Hi,
You will also need 1 x ASC # 7381 CVD rebuild kit.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX3276&P=7
Don't forget I haven't use these axles with the RPM hubs before, but I measured a pair of axles RC10th
had and it should work.
Broodenburg said it will work, I can let you know for sure when my parts turn up.
I don't know the part number for the shiny CVD bones, only the kit,
which is # 1197.
You will also need 1 x ASC # 7381 CVD rebuild kit.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX3276&P=7
Don't forget I haven't use these axles with the RPM hubs before, but I measured a pair of axles RC10th
had and it should work.
Broodenburg said it will work, I can let you know for sure when my parts turn up.
I don't know the part number for the shiny CVD bones, only the kit,
which is # 1197.
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Mostly Black RC10T.
Hi,
Team Associated are showing stock of the # 7379 bones.
https://www.teamassociated.com/parts/details/7379-ASC7379-mip_cvd_bone/
Team Associated are showing stock of the # 7379 bones.
https://www.teamassociated.com/parts/details/7379-ASC7379-mip_cvd_bone/
-
- Approved Member
- Posts: 69
- Joined: Sun Sep 18, 2016 4:33 am
- Location: Alberta,Canada
- Been thanked: 1 time
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Mostly Black RC10T.
That's for sure,
I felt sad today watching him ride past without stopping.
Looks like I have to wait till next week, hopefully Monday.
I felt sad today watching him ride past without stopping.
Looks like I have to wait till next week, hopefully Monday.
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Mostly Black RC10T.
My parts turned up
The B4/T4 axles worked with the RPM hubs with the addition of one #7368 shim per side,
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2976&P=7
and using the Blue washers, 9608.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEAD3&P=7
But with the axles I received, the roll pin hole is loose, I had to put a crimp in the center of the roll pin,
using an old set of side cutters, to get them to work.
I checked the B4 and T4 manuals, I have the correct roll pin # 7369.
https://www.teamassociated.com/pdf/cars_and_trucks/RC10B4/drawing_b4.pdf
https://www.teamassociated.com/pdf/cars_and_trucks/RC10T4/Factory_Team/drawing_ftt4.pdf
I just sent Team Associated an E-mail.
The B4/T4 axles worked with the RPM hubs with the addition of one #7368 shim per side,
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2976&P=7
and using the Blue washers, 9608.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEAD3&P=7
But with the axles I received, the roll pin hole is loose, I had to put a crimp in the center of the roll pin,
using an old set of side cutters, to get them to work.
I checked the B4 and T4 manuals, I have the correct roll pin # 7369.
https://www.teamassociated.com/pdf/cars_and_trucks/RC10B4/drawing_b4.pdf
https://www.teamassociated.com/pdf/cars_and_trucks/RC10T4/Factory_Team/drawing_ftt4.pdf
I just sent Team Associated an E-mail.
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Mostly Black RC10T.
Thanks RJ,
I put the blue Team nose tubes on, I didn't think I would like them.
But with the blue springs it looks great.
Need to take a pic.
I put the blue Team nose tubes on, I didn't think I would like them.
But with the blue springs it looks great.
Need to take a pic.
-
- Approved Member
- Posts: 69
- Joined: Sun Sep 18, 2016 4:33 am
- Location: Alberta,Canada
- Been thanked: 1 time
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Mostly Black RC10T.
Hi Mate,
I am not sure, this is where things will slow down,
I wanted to use a Team body, but I only have an early body from TBG.
Here are some more pics,
I am not sure, this is where things will slow down,
I wanted to use a Team body, but I only have an early body from TBG.
Here are some more pics,
-
- Approved Member
- Posts: 125
- Joined: Mon May 16, 2016 7:19 am
- Location: Rome, Georgia
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: Mostly Black RC10T.
Cheers, Thanks Mate.
Tower Hobbies sent me an E-mail that the back ordered 10T/T2/T3/GT CVD Bones were in stock.
They are in limited numbers though, I was able to get 2.
Tower Hobbies sent me an E-mail that the back ordered 10T/T2/T3/GT CVD Bones were in stock.
They are in limited numbers though, I was able to get 2.
-
- Approved Member
- Posts: 125
- Joined: Mon May 16, 2016 7:19 am
- Location: Rome, Georgia
Re: Mostly Black RC10T.
Whats the item number for them through tower? Also 2 other questions - what bolts did you use to attach the shocks to the shock tower? What's the official number on those wheels an do they make a flourescent yellow equivalent?DaveM wrote:Cheers, Thanks Mate.
Tower Hobbies sent me an E-mail that the back ordered 10T/T2/T3/GT CVD Bones were in stock.
They are in limited numbers though, I was able to get 2.
Truck looks fantastic!
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6 Replies
- 686 Views
-
Last post by longboardnj
-
- 4 Replies
- 830 Views
-
Last post by flipwils11
-
- 13 Replies
- 1413 Views
-
Last post by THUNDERSTRIKE1
-
- 5 Replies
- 2117 Views
-
Last post by GRIZZLY
-
- 1 Replies
- 587 Views
-
Last post by jwscab
-
- 13 Replies
- 972 Views
-
Last post by Halgar
-
- 32 Replies
- 3245 Views
-
Last post by Bormac
-
- 5 Replies
- 1259 Views
-
Last post by paul_A
Who is online
Users browsing this forum: Google [Bot] and 20 guests