Page 4 of 5

Re: Composite Craft RC10T - Dream Build

Posted: Sun Sep 03, 2017 3:57 pm
by jamin
I saw this on FB and wondered who built this truck - absolutely bang on - love the black wheels with that body shell, spot on!!

Re: Composite Craft RC10T - Dream Build

Posted: Sun Nov 05, 2017 12:24 am
by Lavigna
Thanks Jamin. I'm hoping you have a build or two coming soon. I love your work.

I finally got a permanent motor and ESC, thanks to SofaKIng. Both new. I looked for a long time, but could not find a vintage motor I liked better/fit better with this build than the Reedy Sonic 2. This was SofaKing's suggestion, as I wasn't even aware of this motor prior.

The G10 esc is technically a few years too new for this truck, but I love the look of it. I removed and permanently soldered the on/off switch. I switched the receiver lead to an all black unit. When I wire up the motor and battery, I will use all black wiring, to match the murdered out look of the build.

I am still looking for some aluminum CRP shock collars. If I find a set, I plan to have them anodized black, and I think they will really look nice. I think I will have the shock caps re-anodized at the same time, as they are a little purple in the light.

Just tonight I bought a NIB Tekin receiver. I have been looking for one of these for awhile as well. Thanks to Jason Csontos for the sale. Can't wait to get it.

As always, suggestions always welcome. I love this little truck too much.

Re: Composite Craft RC10T - Dream Build

Posted: Sun Nov 05, 2017 2:15 pm
by jcwrks
I still drool over this build. :D

Do you have a 40MHz Futaba or KO radio so that you can run it?

Which Tekin did you score?

Re: Composite Craft RC10T - Dream Build

Posted: Tue Nov 07, 2017 12:43 am
by Lavigna
jcwrks wrote: Sun Nov 05, 2017 2:15 pm I still drool over this build. :D

Do you have a 40MHz Futaba or KO radio so that you can run it?

Which Tekin did you score?
I just bought the Tekin receiver, and have not received it yet. I do not have a 40mhz, but that is not an issue. This truck will not be driven. She it too pretty.

Re: Composite Craft RC10T - Dream Build

Posted: Tue Nov 07, 2017 7:26 am
by jcwrks
lavigna wrote: Tue Nov 07, 2017 12:43 am
jcwrks wrote: Sun Nov 05, 2017 2:15 pm I still drool over this build. :D

Do you have a 40MHz Futaba or KO radio so that you can run it?

Which Tekin did you score?
I just bought the Tekin receiver, and have not received it yet. I do not have a 40mhz, but that is not an issue. This truck will not be driven. She it too pretty.
I misunderstood. You mentioned the G10 being too new, but then you mentioned buying a new Tekin esc from Jason. I see now that you meant receiver and not another new esc. Looking forward to more pics.

Re: Composite Craft RC10T - Dream Build

Posted: Tue Nov 07, 2017 2:15 pm
by Lavigna
jcwrks wrote: Tue Nov 07, 2017 7:26 am
lavigna wrote: Tue Nov 07, 2017 12:43 am
jcwrks wrote: Sun Nov 05, 2017 2:15 pm I still drool over this build. :D

Do you have a 40MHz Futaba or KO radio so that you can run it?

Which Tekin did you score?
I just bought the Tekin receiver, and have not received it yet. I do not have a 40mhz, but that is not an issue. This truck will not be driven. She it too pretty.
I misunderstood. You mentioned the G10 being too new, but then you mentioned buying a new Tekin esc from Jason. I see now that you meant receiver and not another new esc. Looking forward to more pics.
Oops. I corrected it to receiver. Thanks.

Re: Composite Craft RC10T - Dream Build

Posted: Sun Nov 12, 2017 12:40 am
by Lavigna
I got the new Tekin receiver installed. Made a few small changes here and there on the truck. I added a foam battery pad, and I cut down the battery bulkhead piece to allow the foam to mount flat. I think this looks nice, plus it will keep the CC frame from getting scratched if I add cells. I still have a few plans for the shocks, and need to figure out if I want to add some cells. Other than that, I don't know what more I would want to add/change/upgrade on this. Out of my near 30 RC car/truck collection, this is my favorite. I think it is such a cool looking rig.

Re: Composite Craft RC10T - Dream Build

Posted: Mon Nov 13, 2017 2:02 am
by sandkil
What a build! :shock: It's gorgeous!
It's a shame that there are no Composite Craft decals out there. Would really be the finishing touch on that beautifully painted body.

Re: Composite Craft RC10T - Dream Build

Posted: Mon Nov 13, 2017 5:15 am
by Lonestar
lavigna wrote: Sun Nov 12, 2017 12:40 am I don't know what more I would want to add/change/upgrade on this. [...] I think it is such a cool looking rig.
Agree. Sexy as hell. Love it :mrgreen:

Re: Composite Craft RC10T - Dream Build

Posted: Thu Nov 16, 2017 1:07 am
by Lavigna
sandkil wrote: Mon Nov 13, 2017 2:02 am What a build! :shock: It's gorgeous!
It's a shame that there are no Composite Craft decals out there. Would really be the finishing touch on that beautifully painted body.
Thanks so much!

I agree on the decals. I have been keeping my eyes open for them.

Re: Composite Craft RC10T - Dream Build

Posted: Thu Nov 16, 2017 9:17 am
by Asso_man!
Looks really sweet and yummy! You should wire it up though and make it race-ready for added realism :-)

Re: Composite Craft RC10T - Dream Build

Posted: Thu Nov 16, 2017 9:54 am
by sandkil
lavigna wrote: Thu Nov 16, 2017 1:07 am
sandkil wrote: Mon Nov 13, 2017 2:02 am What a build! :shock: It's gorgeous!
It's a shame that there are no Composite Craft decals out there. Would really be the finishing touch on that beautifully painted body.
Thanks so much!

I agree on the decals. I have been keeping my eyes open for them.
I have contacted Nathaneal on MCI. He has put it on his to-do list :wink:

Re: Composite Craft RC10T - Dream Build

Posted: Fri Feb 02, 2018 2:43 am
by sandkil

Re: Composite Craft RC10T - Dream Build

Posted: Sun Apr 22, 2018 6:25 pm
by Devilbrad
This truck is nutso, gorgeous, and just wow!

Re: Composite Craft RC10T - Dream Build

Posted: Mon Jun 25, 2018 4:49 pm
by Lavigna
Sandkil - I finally got around to ordering decals from MCI. I think the CC decals look great. They really make a big visual difference. I just wanted to keep adding them on, but don't want to over do it. Thanks for the heads up!

I still have one more big upgrade for this truck before I can call it complete. I hope to be able to complete it soon.