32p was original. If it's finer teeth someone went 64p
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
Is this something you can tell by looking or at least comparing them?
The spur & pinion I've installed in OptiMutt--with Robinson Racing spurs--uses a pinion with tiny teeth shown on the left. To the right is something else, and in the middle is...
Last post
you can actually measure the pitch by measuring between teeth pretty easily as well. but you need to measure at the root of the tooth.
32 pitch, well, 32 teeth to 1 inch, so 1/32 between teeth. this is for diametrical pitch gears.
Can anyone tell me what the gear pitch is on a stealth transmission? I’m converting a Championship Edition to brushless, and wanting to get a few pinion gears to try out. Thanks for any info.
Last post
Sounds great Frankentruck, thanks for the reply. I’m a newbie at this and learning as I go. Thanks again.
Should be smoother but I can't say how much of a benefit the Thorp 64p gears actually produced. Main reason for using 64p gears is you can fine tune gear ratios...but that doesn't really come into play with the gears inside the transmission, only...
i got a deal on a kyosho outrage with a bad pinion gear..will any 32pitch gear work??i ask cause the kyosho pinions look different and i know tamiya 48 pitch is not like rc10 48 pitch..are any 32pitch gears like this or is all 32pitch gears the...
Last post
mmmm, 2 pinions, with how many teeth each?
Gears with few teeth always mesh with more friction than larger diameter ones i have 2 15t pinions 1 gold kyosho 1 silver from another car?both gears are a bit worn.the kyosho seems to be a bit bigger plus...
I am currently working on the CAD to create my own RC10 custom gearbox with readily available internals. In my search for a diff with a gear 45T or smaller I found the Cougar Laydown diff which is available as dall as well...
Last post
I have been 3d printing gears for the cougar 2000 and can now say it is not 48dp and actually 0.5MOD.
I just found another blast from the past, in one of my boxes.
It is the 48 Pitch 6 Gear tranny made for the old housing. Notice in the picture below the transmission on the left is the 32 Pitch standard transmission with the black upgrade gears,...
Last post
Nice parts !
That's a pleasure to find somebody getting all his old stuff. We are so many to put it out.
Don't remind such thing to Craig Dresher, he turn crasy to the idea of what he put to the garbage during his last move !
Howdy
Looking for a diagram or instruction for the 48 pitch gear internal conversion for the old six gear. I think MIP made it but I could be mistaken. Trying to breath life back into an old friend. Thanks
Last post
I have the complete thorp 48p setup and the outdrive bearing mod (with inner bearing removal from outdrives) in my red pan/American flag rc10 build. There are faqs on it in the temple tech section if you search.
A while ago I won these 48 pitch gear sets made by trinity for the ultima & optima. I'm thinking of using one in my ultima runner but am having difficulties figuring out the gear ratio. Surely a gear ratio table existed but it didn't come with...
Last post
A larger spur allows you to use smaller pinions and still reach the spur. Doing so will bring the final ration for both closer agian, so that makes sense.
My guess: the overdrive kit was intended for stock moters.