I am starting to piece together my first DS and want to be sure of the parts needed to run modern wheels and tires. What is the easiest route to obtain the needed pieces and what are said pieces?
Hi guys. I'm trying to help my friend find some modern 2.2 wheels for his Bullet. Anyone know of something that will bolt on, or something that won't need a whole lot of parts swapped? He doesn't have a lot of money to spend, so I'd like to keep it...
Last post
yep, alternately, you could swap out the spindles for rc10 spindles (with or without the longer axles) and run 2.2 rc10 or 2.2 B4 fronts.
I found the wheels at my LHS and they seemed to have right offset for RC10 and later B2/B3.
parts # is Hongnor TM-49Y or Ofna #40849 wheels for CRT.5. and just checked they are listed on ebay also
I have never had a Associated truck before, but have been aimlessly going through the truck forum for some research. This might be a simple question that probably has been answered already, but has anyone converted a vintage...
Last post
I ended up using the Rc10T CVD bones and the new quick connects for the T4. Works absolutely awesome!!!
as long as your cars have the correct buggy suspension parts, here's what to get:
duratrax bx front rims and nitro rear rims. they're 2.2's, so modern tires will fit.
then, get a set of mip b2 cvd's.
4 of these bearings for the rear hub...
Last post
Hello . Well I guess these days 2.2 hex wheels are the new modern . This is my RC10 Conversion and comparison to a B5M. The shapeways arms seem to be duarable took couple hard hits and nothing broke (yet) . :D
Front - B4 20 degree caster blocks ....
Im trying to finish some builds and hoping someone here can tell me where to buy hinge pins and turn buckles for my RC10.Surely they are the same as some modern cars.I also need shock ends with the hex ball,ball studs and ends.So where do you guys...
Currently putting back together an Andys RC10 conversion.
Anyone got or know if anyone has done a reproduction of the front shock tower? I don't appear to have one. Rear shock towers seem ten a penny on the bay but fronts are missing....
Last post
Check with GoMachV on here, he reproduces lots of different towers.
Any straight forward solution to running modern 12mm hexes on my Jrx2? I figured I'd just upgrade the front of the car with RB6 front axles/spindles. I was hoping there was an available hex for the rear.
Thanks,
Kevin
Last post
There's always this option to run standard XX or XXX wheels....