Outside the Boxart
RPM 10T Arms (7040)
B4 Front Shocks (0.89) – With re-anodized Trinity collars and white RC10 hardware.
Steering – Worlds ballbearing on the left, Traditional right, with white AE ball cups.
RC10 trailing Steering blocks, old school (6216).
*Lunsford Titanium B4/SC10 Axles (7150) – Shortened to fit the steering blocks, as shown
* XXXT Caster block carriers. Neutral or equal to kickup (LOSA4125). Filed to fit.
*Gold Nose Plate (6310) - Modified as shown and bent to 25 degree kickup.
*Nose brace tubes (6320) – Cut and retapped to fit as shown.
*10T bulkhead (7207) –Sectioned and reversed as shown.
*Custom FRP Shock tower
*Custom Kydex front bumper/skid plate.
B4 Rear Shocks (1.18) – With re-anodized Trinity collars and RC10 hardware as shown.
RPM RC10GT Carriers – White (7027)
B4 Axle Spacers (9608)
Stealth Tranny with B4 Topshaft, 81T Spur and Clear Cover
*Custom FRP Low Profile Shock Tower and Tray Brace
*Robinson Racing Adjustable Blocks -Disassembled, cut and drilled to 2 & 3.5 deg. Possibilities, using 6 gear holes.
*RC10 Cadillac Bulkhead - Narrowed to near the nose tube holes, deepened the 8-32 threads, and cut to fit the Robinson blocks. I need to get better pics because this is very tight!
*10T Rear Arms by RPM (7030) – Broken set shortened and re-drillled 6mm at inward ends.
*T4 C-CVD’s (MIP 7020) – Shortened bone to about 75mm.
*Gold Tub Chassis, A Stamp (6300) –2cm at sides and narrowed to 6 gear holes at rear.
*Gold Motor Plate (6607) Drilled for B4 Cover
*Custom FRP battery hold down
Battery Cup – drilled forward to allow battery positioning for weight (11mm front to back)
RC10 Antenna and servo mounts.
B4 wheels all around
Lunsford Punisher Turnbuckles and RPM Ball Cups
Lunsford RC10GT Titanium Hinge Pin Set (3012)
Protech Body (6160)
JConcepts Illuzion Wing for B4 (0102)
Squarehead’s Box Art Decal sheet
Parma Flames Stripes Paint Mask 5.5” x 8.5” (743)
Most useful Tools (required for modifications to some parts above, as indicated by the *’s)
Hack saw (used it more than the Dremmel)
Files - a big 10” bastard and a little hobby set of needle files (also used more than the Dremmel).
4-40 and 8-32 taps
Blue painters tape
Exacto and utility knives
A steel mm ruler.
A roller B4 and T2 available to check different parts and possibilities.
RC10talk.com and its associated constituency