Please help support RC10Talk.com!
Donate towards my web hosting bill!
Any contribution helps!!

titanium top shaft

General info, Q&A...

Moderators: templeofspeed, scr8p

Post Reply
User avatar
PBR Allstar
Super Member
Posts: 1047
Joined: Tue May 01, 2007 2:30 am
What was your first real rc car?: Tamiya Falcon
Location: Sonoma, Ca
Contact:

titanium top shaft

Post by PBR Allstar » Thu Nov 26, 2009 7:12 pm

I recently stripped apart an old stealth out of my junk box and it had a really nice ti top shaft in it! I was curious who made them back in the day, and if they are still available? It came out of a trans that was in an old dirt oval car so maybe it was a D.O. manufacturer? or Robinson maybe?

User avatar
a01butal
Super Member
Posts: 3162
Joined: Sat Jan 12, 2008 2:15 pm
What was your first real rc car?: RC10 bought for my son in 1987
Location: Shorewood, IL

Re: titanium top shaft

Post by a01butal » Thu Nov 26, 2009 7:55 pm

Hammad Ghuman made one.
___________________________________________________________
This is all very interesting!

User avatar
PBR Allstar
Super Member
Posts: 1047
Joined: Tue May 01, 2007 2:30 am
What was your first real rc car?: Tamiya Falcon
Location: Sonoma, Ca
Contact:

Re: titanium top shaft

Post by PBR Allstar » Thu Nov 26, 2009 8:09 pm

are they a rare piece? worth using? It seems really well made, the gear is very smooth.

User avatar
a01butal
Super Member
Posts: 3162
Joined: Sat Jan 12, 2008 2:15 pm
What was your first real rc car?: RC10 bought for my son in 1987
Location: Shorewood, IL

Re: titanium top shaft

Post by a01butal » Thu Nov 26, 2009 9:11 pm

I found one a while back still hanging on the rack but probably still somewhat rare, don't come up on eBay all that much. It's titanium so almost bullet proof.
___________________________________________________________
This is all very interesting!

Charlie don't surf
Super Member
Posts: 10655
Joined: Tue Apr 08, 2008 6:44 pm
What was your first real rc car?: 1991
Location: USA

Re: titanium top shaft

Post by Charlie don't surf » Fri Nov 27, 2009 5:07 am

Robinson racing made them as well, If I remember right-the HG looks different than the Robinson, and the robinson ones shaft dia was a little small, and they wore out gears like crazy--if you post a pic of yours, I dig out the NIP robinson one to compare
]

User avatar
PerryCodes
Approved
Posts: 45
Joined: Tue Oct 25, 2016 7:28 pm
What was your first real rc car?: RC10GT
Location: Ottawa, IL

Re: titanium top shaft

Post by PerryCodes » Mon Jul 10, 2017 11:04 pm

Do I have ANY chance of finding one of these? Don't ask me why... but I had a desire to set up an all-metal stealth transmission (w/ plastic spur gear... I'm crazy - not stupid). You can still easily find the hardened aluminum diff gear and after a couple of months of watching eBay, I was able to track down a couple hardened steel idler gears - all from Robinson Racing, but my AE steel top shaft might has well been made out of butter!

After about a 1/2 gallon of medium-speed running - most on the street / one day at the track - I opened up the transmission to see how things looked. The idler was in perfect condition. The diff gear and top shaft? Not so much! The edges of the diff gear looks like the "hardening" had started to chip off. Not extremely bad, but definitely not what I want to see... The camera I used sucks and wouldn't let me stay focused in order to take a decent picture of the diff gear. You can, however, clearly see the damage done to the top shaft.

diff-gear.jpg
top-shaft.jpg
top-shaft-2.jpg

So... Would a titanium top shaft hold up to such abuse? I see that all-steel top shafts were changed at some point to being a mix of steel with a plastic gear. Would that work better with the hardened steel idler? Worse? Is there any benefit to running the aluminum diff gear if I replaced the idler with the default plastic one?

Hopefully the three people that still use the forum are able to offer up some experience-based advice ;)

Cheers ~ Jason

User avatar
klavy69
Moderator
Posts: 5708
Joined: Thu May 29, 2008 8:11 pm
What was your first real rc car?: rc10gt
Location: Fulton, IL (Land of one stop light but we DO have a windmill!)

Re: titanium top shaft

Post by klavy69 » Tue Jul 11, 2017 1:11 am

Jason, Its an expensive gamble but mostly metal to metal is never good. I've done it as some of the locals when these were still available all with different degrees of success...if you can call it that. I'm actually surprised you got that much out of the topshaft! My best luck has been with a delrin idler between the metals. Yeah, you can strip them out but honestly you can wreck an all steel tranny just as fast...but with alot more bucks at stake.

Oh, and they are out there. I picked up a topshaft last week off ebay 8) .

Todd
Peace and professionlism.....Kabunga signing off!!!

jcwrks
Approved
Posts: 66
Joined: Wed Jun 21, 2017 7:40 pm
What was your first real rc car?: RC10 #6010
Location: San Angelo, TX

Re: titanium top shaft

Post by jcwrks » Wed Jul 26, 2017 5:14 pm

Unless you're shredding gears I would stick with the plastic idler.

User avatar
jwscab
Life Saver
Posts: 5312
Joined: Wed Jan 28, 2009 2:42 pm
What was your first real rc car?: grasshopper
Location: Chalfont, PA

Re: titanium top shaft

Post by jwscab » Wed Jul 26, 2017 5:53 pm

the plastic idler with metal top gear and diff gear would be the most efficient, strongest and maintanence free. if you decide for all metal you need some good lubrication that stays on the gears.

Post Reply

Return to “Temple's RC10 Tech Forum”

Who is online

Users browsing this forum: No registered users and 1 guest