RC10 CE Set Up and Race Discussion

General info, Q&A.

Moderators: scr8p, klavy69

User avatar
askbob
Approved Member
Posts: 1735
Joined: Sun Apr 03, 2011 11:24 am
Location: KY
Been thanked: 3 times

Re: RC10 CE Set Up and Race Discussion

Post by askbob »

^ Sounds like a good idea. 8)

User avatar
85Edinger
Approved Member
Posts: 656
Joined: Sat Mar 24, 2012 2:17 pm
Location: Albany, NY

Re: RC10 CE Set Up and Race Discussion

Post by 85Edinger »

. . . you have Associated Green Slime for brains. And not even new Green Slime, but old gooped out Green Slime.

User avatar
mk-Zero
Business Member
Posts: 1678
Joined: Fri Jan 03, 2014 2:14 pm
Location: Orange, CA
Has thanked: 4 times
Been thanked: 19 times

Re: RC10 CE Set Up and Race Discussion

Post by mk-Zero »

Anyone have a part number for the 3 degree rear arm mounts? What were they on originally? Are the correct 0 degree rear hubs to go with them pn 7364?

User avatar
JK Racing
Approved Member
Posts: 4599
Joined: Thu Jul 19, 2007 2:32 pm
Location: Placentia, CA
Has thanked: 102 times
Been thanked: 192 times

Re: RC10 CE Set Up and Race Discussion

Post by JK Racing »

I use (when I can find them, I am out right now!) Associated 7363 mounts & 7365 hubs - T2 parts.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com

User avatar
mk-Zero
Business Member
Posts: 1678
Joined: Fri Jan 03, 2014 2:14 pm
Location: Orange, CA
Has thanked: 4 times
Been thanked: 19 times

Re: RC10 CE Set Up and Race Discussion

Post by mk-Zero »

Thanks Joey. The search is on 8)

ca-rj
Approved Member
Posts: 359
Joined: Sat May 18, 2013 4:12 pm
Location: Olathe, KS

Re: RC10 CE Set Up and Race Discussion

Post by ca-rj »

I have a Worlds Car getting delivered tomorrow and have one evening to get it prepped for racing. I race on a medium size track, with maybe a 50 yard straight. It's indoor, medium grip and bumpy. I run JConcepts Dirt Webs in Green front and rear. I'm planing on running a full size lipo.

For a starting setup, I was thinking...

Front--
35 wt, 1 hole piston and brown springs

Rear
30 wt, 1 hole piston and black springs

I'm a little worried that the oil is too thick though. I usually run 30/27.5 on my B4.2 with a shorty. I figured with the added weight of the full size lipo the thicker oil was warranted.

Thoughts????
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258

User avatar
askbob
Approved Member
Posts: 1735
Joined: Sun Apr 03, 2011 11:24 am
Location: KY
Been thanked: 3 times

Re: RC10 CE Set Up and Race Discussion

Post by askbob »

Bump for those racing a Worlds setup or a CE.

User avatar
Garage Hack
Approved Member
Posts: 29
Joined: Tue Oct 11, 2016 10:47 pm
Has thanked: 121 times
Been thanked: 4 times

Re: RC10 CE Set Up and Race Discussion

Post by Garage Hack »

Are all of the B4, RC10T, and T2 parts interchangeable? Specifically the rear 0 degree mounts and the 25 degree blocks?

User avatar
JK Racing
Approved Member
Posts: 4599
Joined: Thu Jul 19, 2007 2:32 pm
Location: Placentia, CA
Has thanked: 102 times
Been thanked: 192 times

Re: RC10 CE Set Up and Race Discussion

Post by JK Racing »

Garage Hack wrote: Mon Feb 15, 2021 2:32 pm Are all of the B4, RC10T, and T2 parts interchangeable? Specifically the rear 0 degree mounts and the 25 degree blocks?
B4, no - 10T and T2, many parts, suspension-wise. The steering blocks and rear arm mounts are the same between the two trucks. The B4 (4th generation buggy) has parts that can be adapted to the trucks, but very few actual drop in parts interchange.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com

User avatar
Garage Hack
Approved Member
Posts: 29
Joined: Tue Oct 11, 2016 10:47 pm
Has thanked: 121 times
Been thanked: 4 times

Re: RC10 CE Set Up and Race Discussion

Post by Garage Hack »

JK Racing wrote: Tue Feb 16, 2021 1:07 am
Garage Hack wrote: Mon Feb 15, 2021 2:32 pm Are all of the B4, RC10T, and T2 parts interchangeable? Specifically the rear 0 degree mounts and the 25 degree blocks?
B4, no - 10T and T2, many parts, suspension-wise. The steering blocks and rear arm mounts are the same between the two trucks. The B4 (4th generation buggy) has parts that can be adapted to the trucks, but very few actual drop in parts interchange.
Thanks for the quick response. So based on that, I should be able to use the 10T and T2 rear arm mounts and steering blocks on my gold pan car? Not sure if you ever get out to OCRC but I plan on making it to a practice night to run the car once I get it all together.

User avatar
JK Racing
Approved Member
Posts: 4599
Joined: Thu Jul 19, 2007 2:32 pm
Location: Placentia, CA
Has thanked: 102 times
Been thanked: 192 times

Re: RC10 CE Set Up and Race Discussion

Post by JK Racing »

I havent been out there in quite a while, I really enjoy outdoor over indoor clay - but that said, let me know, I may be able to get some time and drop by. Yes, the carriers & rear mounts from the trucks carry back to the buggy. I'll need to dig up pictures, we were having a once a week vintage get together at OCRC, I made it a couple times. It was pretty fun.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com

User avatar
carloco8
Approved Member
Posts: 622
Joined: Sun Jun 04, 2006 2:02 pm
Location: SoCal
Has thanked: 8 times
Been thanked: 26 times

Re: RC10 CE Set Up and Race Discussion

Post by carloco8 »

Hey Joey, I remember those get togethers at ocrc, good times! Pegasus recently moved too and currently doesn't have a track anymore, but hopefully they get something going again down the line.
Old school racing all the way!

User avatar
JK Racing
Approved Member
Posts: 4599
Joined: Thu Jul 19, 2007 2:32 pm
Location: Placentia, CA
Has thanked: 102 times
Been thanked: 192 times

Re: RC10 CE Set Up and Race Discussion

Post by JK Racing »

We get a nice little vintage group together a few times a year at a private backyard track in Yucaipa. Outdoor holeshot type track. We run a variety of everything vintage, modern, spec slash - only 10th scale. We even have a 'toy' class, for the plastic fantastic tamiya cars (silver can motors only).
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com

Medved
Regular Member
Posts: 27
Joined: Fri Aug 01, 2014 12:37 pm
Has thanked: 1 time
Been thanked: 7 times

Re: RC10 CE Set Up and Race Discussion

Post by Medved »

I'm experimenting with long wishbones to see how much effect it makes.
running 35wt front with a blue spring and 30wt rear with a silver spring
Attachments
Rc10 ce
Rc10 ce

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • Rc10 short arm/ 6 gear setup and race discussion
    by 85Edinger » » in Temple's RC10 Tech Forum
    66 Replies
    9063 Views
    Last post by GeekSpeed
  • JRX series set up discussion
    by JK Racing » » in Losi Forum
    23 Replies
    3087 Views
    Last post by Johanp
  • The vintage cars you've set down on a race track.
    by Bormac » » in Racing News / Get-Togethers
    71 Replies
    15862 Views
    Last post by Headling
  • rc10 screw set
    by niggs98 » » in RC10 Buggy Forum
    4 Replies
    1357 Views
    Last post by Tamlok
  • RC10 carpet set up
    by seagull extra » » in RC10 Buggy Forum
    1 Replies
    577 Views
    Last post by mk-Zero
  • Rc10 stealth carpet set up
    by Trackingz » » in RC10 Buggy Forum
    5 Replies
    1213 Views
    Last post by RC10th
  • RC10 Boca Bearing set
    by 85Edinger » » in RC10 Buggy Forum
    11 Replies
    1603 Views
    Last post by 85Edinger
  • Is these early edinger rc10 tire set?
    by crusaderlyf » » in RC10 Buggy Forum
    5 Replies
    1067 Views
    Last post by RC10resto

Return to “Temple's RC10 Tech Forum”

Who is online

Users browsing this forum: No User AvatarAhrefs [Bot] and 23 guests