== Useful RC10 Links ==

General info, Q&A.

Moderators: scr8p, klavy69

User avatar
martinthegenius
Approved Member
Posts: 51
Joined: Fri Mar 28, 2008 10:37 pm
Location: California (Frisco)

Re: Useful RC10 links

Post by martinthegenius »

ty for the bearing link (http://www.avidrc.com/?action=category&id=1), THis is the upgrade for vintage rc10s- link
http://www.avidrc.com/shop/?action=item&id=11&prevaction=category&previd=1&prevstart=0

This is much cheaper than tower- now i can afford to do both of my cars with these

ALso, where might i find original rear tyres for the 84' gold tub

rc10DS fan
Approved Member
Posts: 101
Joined: Tue Jan 08, 2008 6:57 pm
Location: muncie,ind

Re: Useful RC10 links

Post by rc10DS fan »

the new AE site is harde to navagate. they've lost the article section altogether.:(

User avatar
MOmo
Approved Member
Posts: 676
Joined: Thu Jan 18, 2007 4:32 pm
Location: Portland OR.
Been thanked: 1 time

Re: Useful RC10 links

Post by MOmo »

*Duplicate of a diff/ post. My bad.



MOmo

User avatar
mrlexan
Approved Member
Posts: 6253
Joined: Wed Dec 06, 2006 6:49 pm
Location: Upstate SC
Been thanked: 10 times

Re: Useful RC10 links

Post by mrlexan »

Temple needs to pipe in on that one.
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com

cowsrneat2002
Regular Member
Posts: 25
Joined: Tue Aug 19, 2008 5:55 pm
Location: Coastal Bend, Texas

For Vintage Radio Repairs

Post by cowsrneat2002 »

If you want to repair or have your vintage radios serviced.

http://www.radiosouthrc.com/

User avatar
MelvinsArmy
Approved Member
Posts: 3227
Joined: Tue Feb 07, 2006 10:22 pm
Location: Des Moines, IA
Been thanked: 8 times

Re: Useful RC10 links

Post by MelvinsArmy »

bngiles wrote:Somebody asked a while back about part #'s associated with bulk items that might be used on R/C stuff from McMaster. Well, I got bored at work, so here goes...

Nylon wing nuts (natural):
4-40 94924A005
8-32 94924A009
10-32 94924A012

G10 FR4 Garolite (black) 1/8" X12" X12" 85345K12

Nylon Locking nuts (natural) like the ones on the Losi axles and upper shock mounts:
4-40 94909A005
6-32 94909A007
8-32 94909A009
10-32 94909A022

1/8" shaft e clips 98407A116

Silicone O-rings -006 9396K11

.1260" Straight reamer 3087A31

1/4" diameter anodized aluminum rod 12" 6750K13


Most of the small fasteners are 100 ct, but all prices are reasonable. The most expensive thing on the list is the G10 sheet at $12.50. I did not put any prices on here cause the book I was looking at is a few years old. I'm sure everything has gone up some. Their Phone # is 404-346-7000. Hope this helps at least one person out.

And no I dont work for them either.

tizeye
Approved Member
Posts: 1004
Joined: Thu Jan 01, 2009 11:00 pm
Location: Otago New Zealand
Been thanked: 1 time

Re: == Useful RC10 Links ==

Post by tizeye »

This is really cool, there is just so much information on RC10's on here that I'm blown away. I have 2 RC10's that are stock, one has been butchered by a previous owner but with a mint new body and a huge pile of tyres and other odd's and sodd's, but it's best feature is that it has a belt drive conversion on it. I bought a new "A" chassis for it but ended up buying the second RC10 off ebay for a reasonable price of $US76 or around $NZ170-180 delivered a few days later. It is in far better condition than the first one but has a few scratches on the chassis but no body so with what I've got I hope to build a nice restored car. I can't help myself so last week I spotted a Big Boys Toys sprintcar chassis with no suspension/wheels or electrics that I just had to have. I figured that with all of the bits left over from the other 2 cars that I might get a roller together. Well imagine how I felt when I came across the link above to original manufacturers web site..Thanks guys you are legends..
Tizeye
:D

tizeye
Approved Member
Posts: 1004
Joined: Thu Jan 01, 2009 11:00 pm
Location: Otago New Zealand
Been thanked: 1 time

Re: == Useful RC10 Links ==

Post by tizeye »

:cry: Ahh Ok after reading more threads on this forum about Big Boys Toys it now appears that my excitment was a little premature..oh well back to plan B and buy a new body off McAllistars..still heaps of help thanks

Tizeye :oops:

User avatar
WebSteve
Approved Member
Posts: 238
Joined: Thu Mar 27, 2008 12:29 pm
Location: Lake Forest
Has thanked: 3 times
Been thanked: 38 times

Re: == Useful RC10 Links ==

Post by WebSteve »

Team Associated documents can be found centrally located here:

http://67.199.85.166/resources/resources.php?page=resources

Steve Husting

User avatar
WebSteve
Approved Member
Posts: 238
Joined: Thu Mar 27, 2008 12:29 pm
Location: Lake Forest
Has thanked: 3 times
Been thanked: 38 times

Re: == Useful RC10 Links ==

Post by WebSteve »

My vintage RC10 photo books can be found here:

http://stores.lulu.com/vintage_rc10

Steve Husting

User avatar
mikedealer
Approved Member
Posts: 1778
Joined: Fri May 18, 2007 12:25 am

Re: == Useful RC10 Links ==

Post by mikedealer »

Gearing Guide Starting points and calculator

http://www.comeseethis.com/gearing/gearing.htm

User avatar
PBR Allstar
Approved Member
Posts: 805
Joined: Mon Apr 30, 2007 10:30 pm
Location: Sonoma, Ca
Has thanked: 1 time
Been thanked: 3 times

Re: == Useful RC10 Links ==

Post by PBR Allstar »

Parts needed for dynotech arm/B4 wheel conversion:

http://dynotech-racing.com/partDetail.php?RefNum=2700 Rear X2
http://dynotech-racing.com/partDetail.php?RefNum=2701 Front X2
http://www.avidrc.com/product/?c=0&p=102 Rear hub bearings x4
http://www.avidrc.com/product/?c=9&p=48 Front wheel bearings x4
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEU81 RPM GT Carriers 70272
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSYV7 Associated Rear CVA Kit B44
http://www3.towerhobbies.com/cgi-bin/wt ... LXEAH8&P=Z Associated wheel spacers
http://www3.towerhobbies.com/cgi-bin/wt ... LXKYT2&P=7 Associated wide front axles
http://www3.towerhobbies.com/cgi-bin/wt ... XEAK8&P=SM Associated rear wheels
http://www3.towerhobbies.com/cgi-bin/wt ... XEAK7&P=SM Associated front wheels
http://www3.towerhobbies.com/cgi-bin/wt ... LX2914&P=7 Associated truck bulkhead
http://www3.towerhobbies.com/cgi-bin/wt ... X2964&P=SM Associated shock tower
http://www3.towerhobbies.com/cgi-bin/wt ... X2585&P=SM Associated 1.02 shocks
http://www3.towerhobbies.com/cgi-bin/wt ... LXBVF8&P=7 Associated front springs
http://www3.towerhobbies.com/cgi-bin/wt ... LX2929&P=M Associated truck nose tubes
(these need to be shortened and redrilled for the correct wheelbase)
http://www3.towerhobbies.com/cgi-bin/wt ... LXTHT3&P=7 Dubro turnbuckles (x3 these need to be cut to length but is the cheap way to go, also good to use to determine length if you want to use titanium in the future

Also needed is a truck nose plate, aftermarket ones are plentiful on ebay.

SnoopMaxx
Approved Member
Posts: 699
Joined: Sat Mar 06, 2010 3:38 pm
Location: Vraa Denmark
Been thanked: 1 time

Re: == Useful RC10 Links ==

Post by SnoopMaxx »

Could you plz upgrade the Tower links :wink:
Morten Max

User avatar
RC104ever
Approved Member
Posts: 1506
Joined: Sun May 22, 2011 11:34 am
Location: Burlington, Ontario - Canada
Been thanked: 8 times

Re: == Useful RC10 Links ==

Post by RC104ever »

PBR Allstar wrote:Parts needed for dynotech arm/B4 wheel conversion:

http://dynotech-racing.com/partDetail.php?RefNum=2700 Rear X2
http://dynotech-racing.com/partDetail.php?RefNum=2701 Front X2
http://www.avidrc.com/product/?c=0&p=102 Rear hub bearings x4
http://www.avidrc.com/product/?c=9&p=48 Front wheel bearings x4
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEU81 RPM GT Carriers 70272
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSYV7 Associated Rear CVA Kit B44
http://www3.towerhobbies.com/cgi-bin/wt ... LXEAH8&P=Z Associated wheel spacers
http://www3.towerhobbies.com/cgi-bin/wt ... LXKYT2&P=7 Associated wide front axles
http://www3.towerhobbies.com/cgi-bin/wt ... XEAK8&P=SM Associated rear wheels
http://www3.towerhobbies.com/cgi-bin/wt ... XEAK7&P=SM Associated front wheels
http://www3.towerhobbies.com/cgi-bin/wt ... LX2914&P=7 Associated truck bulkhead
http://www3.towerhobbies.com/cgi-bin/wt ... X2964&P=SM Associated shock tower
http://www3.towerhobbies.com/cgi-bin/wt ... X2585&P=SM Associated 1.02 shocks
http://www3.towerhobbies.com/cgi-bin/wt ... LXBVF8&P=7 Associated front springs
http://www3.towerhobbies.com/cgi-bin/wt ... LX2929&P=M Associated truck nose tubes
(these need to be shortened and redrilled for the correct wheelbase)
http://www3.towerhobbies.com/cgi-bin/wt ... LXTHT3&P=7 Dubro turnbuckles (x3 these need to be cut to length but is the cheap way to go, also good to use to determine length if you want to use titanium in the future

Also needed is a truck nose plate, aftermarket ones are plentiful on ebay.
Updated these links but they are just searches on Tower Hobbies, maybe someone else can confirm the exact parts referenced above.

Associated Wheel Spacers:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=associated+wheel+spacer&search=Go
Associated wide front axles:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=associated+wide+front+axles&search=Go
Associated Rear Wheels:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+rear+wheels&search=Go
Associated Front Wheels:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+front+wheels&search=Go
Associated Truck Bulkhead (not sure if this is right)
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX3353&P=7
Associated Shock Tower (not sure which one)
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=++&FVSEARCH=associated+shock+tower&search=Go
Associated 1.02 shocks:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+1.02+shocks&search=Go
Associated Front Springs:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+front+springs&search=Go
Associated Truck nose tubes:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+truck+nose+tubes&search=Go
Dubro Turnbuckles:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=%3Cb%3Edubro%3C%2Fb%3E+%3Cb%3Eturn%3C%2Fb%3Ebuckles
- Chris
Lots of cars...so many cars

Soncho Ponza
Approved Member
Posts: 496
Joined: Thu Mar 12, 2009 12:32 am
Location: Ontario, Oregon
Been thanked: 3 times

Re: == Useful RC10 Links ==

Post by Soncho Ponza »

This is awsome stuff...

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • Body Links Please RC10
    by GWXP » » in RC10 Buggy Forum
    7 Replies
    951 Views
    Last post by KidAgain
  • japan RC10 links !
    by coxy-ben » » in RC10 Buggy Forum
    4 Replies
    1167 Views
    Last post by badhoopty
  • Parts List for the RC10 Stealth w/ Towerhobbies Links
    by LowClassCC » » in Temple's RC10 Tech Forum
    7 Replies
    1149 Views
    Last post by Grumbles
  • Arms links
    by Brat » » in Temple's RC10 Tech Forum
    2 Replies
    486 Views
    Last post by Brat
  • Posting Links
    by hardenedways » » in Off-Topic / Chit-Chat
    0 Replies
    961 Views
    Last post by hardenedways
  • Technacraft Links
    by Burniefloyd » » in R/C Off-Topic / Chit-Chat
    7 Replies
    2244 Views
    Last post by radioactivity
  • so.many.dead.photo.links.
    by templeofspeed » » in Off-Topic / Chit-Chat
    4 Replies
    849 Views
    Last post by THEYTOOKMYTHUMB
  • Need help identifying sway bar links please.
    by Mindwarp » » in RC10 Buggy Forum
    11 Replies
    1557 Views
    Last post by Mindwarp

Return to “Temple's RC10 Tech Forum”

Who is online

Users browsing this forum: No registered users and 19 guests