Motor label restoration

The place for digital versions of decals and logos.

Moderators: scr8p, klavy69

User avatar
R Cane
Approved Member
Posts: 1097
Joined: Mon Apr 21, 2014 9:06 am
Location: Northeast Ohio
Has thanked: 155 times
Been thanked: 63 times

Motor label restoration

Post by R Cane »

Yet again, I woke up after only 2 hours of sleep, and was wide awake. This sucks.
At least it's an excuse to sit and stare at the computer screen for another 5 hours until the family gets up.

I have multiple motors that are in decent shape except for the labels, being stained, faded, scraped, etc.
Occasionally you see repro labels on the Bay or something like that, but they are never the ones I need. After talking to several people that have done them in the past and looking elsewhere online, I couldn't find anyone that wanted to do labels.
So I decided to do my own. I've been an amateur artist for about 30 years now, so it's mainly a matter of finding the time to do it...I guess 2 AM is as good of a time as any...
I started by carefully removing the labels from a Tri Sonic and green label Sonic. Then I scanned them at a stupid high resolution and imported them into the graphic editing program I use. The labels looked a lot worse off after scanning than I realized.
The Tri Sonic was the first one I worked on. I do almost everything freehand, redrawing lines, replacing missing parts, etc. The only exception - that you can see on the green Sonic, is when I can use geometric tools to make perfect circles, etc.
The colors on the original scans look a lot more faded than they really are...but that's easy to fix in the program.

The Tri Sonic...before and after ... and remember they are in much higher resolution on my pc for printing. This label, start to finish, took about 16 hours of work over the last month or so to get it tweaked just the way I wanted it...zoomed in to go pixel by pixel to get it right. The only issue left is that my printer color is way off from the graphic program color, so I'll have to print a bunch in different hues until I find the right one.
sm_trisonic1.jpg
sm_trisonic1.jpg (29.02 KiB) Viewed 2359 times
sm_trisonic1.jpg
sm_trisonic1.jpg (29.02 KiB) Viewed 2359 times
sm_trisonic2.jpg
sm_trisonic2.jpg (34.95 KiB) Viewed 2359 times
sm_trisonic2.jpg
sm_trisonic2.jpg (34.95 KiB) Viewed 2359 times

The green Sonic is what I was working on in the middle of the night (and WAY too early morning). It's about half way done.
sm_sonic1.jpg
sm_sonic1.jpg (30.11 KiB) Viewed 2359 times
sm_sonic1.jpg
sm_sonic1.jpg (30.11 KiB) Viewed 2359 times
sm_sonic2.jpg
sm_sonic2.jpg (74.85 KiB) Viewed 2359 times
sm_sonic2.jpg
sm_sonic2.jpg (74.85 KiB) Viewed 2359 times

User avatar
jwscab
Super Member
Posts: 6479
Joined: Wed Jan 28, 2009 9:42 am
Location: Chalfont, PA
Has thanked: 10 times
Been thanked: 434 times

Re: Motor label restoration

Post by jwscab »

nice job!

User avatar
RC10resto
Super Member
Posts: 2914
Joined: Tue Sep 09, 2008 2:26 am
Location: Los Angeles, CA
Has thanked: 999 times
Been thanked: 396 times

Re: Motor label restoration

Post by RC10resto »

Wow :!:
I am sending you more Caffeine :P

User avatar
RichieRich
Approved Member
Posts: 2349
Joined: Wed Jun 14, 2006 11:42 pm
Location: Los Angeles, CA
Has thanked: 33 times
Been thanked: 19 times

Re: Motor label restoration

Post by RichieRich »

That looks pretty damn good. Nice work!
Image

User avatar
R Cane
Approved Member
Posts: 1097
Joined: Mon Apr 21, 2014 9:06 am
Location: Northeast Ohio
Has thanked: 155 times
Been thanked: 63 times

Re: Motor label restoration

Post by R Cane »

Thanks guys. At least I'm getting something done with my insomnia time.

I wonder if they make a foil type paper for a laser printer so I can do a couple Monster Horsepower labels...

User avatar
skunk.werkz
Approved Member
Posts: 246
Joined: Sat Dec 22, 2007 4:09 pm
Location: Pennsylvania
Been thanked: 1 time

Re: Motor label restoration

Post by skunk.werkz »

Someone on ebay has done Monster HP labels, I have not looked too closely to see how chrome they are. Ultrahive here was making really nice labels but he bounced. I would love to see you continue work. I have some Reedy Mr series and Sonics I could use new labels

User avatar
R Cane
Approved Member
Posts: 1097
Joined: Mon Apr 21, 2014 9:06 am
Location: Northeast Ohio
Has thanked: 155 times
Been thanked: 63 times

Re: Motor label restoration

Post by R Cane »

There's a set of Mr. series labels that have been on the Bay for a couple months. There are 3 different Mr's that I need too, but are not among the ones in this lot.

http://www.ebay.com/itm/251723979012

They also have some repro yellow Cadnica 1700SCE labels

http://www.ebay.com/itm/361521542058

I contacted the guy that designed them about making others, he said he only works for that hobby shop - contact them. So I did, and they asked what labels I wanted. I sent a list and asked if they were willing to commission other ones from their design guy, and never got any response. That was a couple months ago.
I talked to Ultrahive also. He has a little leftover misc stock, but isn't interested in making any others, he's onto other things.

I might consider doing more of these, but it's a lot of work, and takes a good amount of time to do it right. So I'd probably only be adding one or two labels a month...but I will consider it. Plus the issue of printing them. I still need to experiment with home printing options to see if it's feasible, or if I have to send them out to get done on a proper vinyl printer. These that I'm making for me are just for shelfers that I'll never run, so it's not so much of an issue. My main concern is using them on a motor that someone will run...will the glue on the back of anything I can print at home still stick when the motor gets super hot? Or will the glue turn into a gooey mess and the label falls off, or sticks to something else...etc? Things to think about...
:wink:

User avatar
R Cane
Approved Member
Posts: 1097
Joined: Mon Apr 21, 2014 9:06 am
Location: Northeast Ohio
Has thanked: 155 times
Been thanked: 63 times

Re: Motor label restoration

Post by R Cane »

Sonic is done. Well, I need to tweak the color a little, but that's easy.
sm_green.jpg
sm_green.jpg (39.15 KiB) Viewed 2283 times
sm_green.jpg
sm_green.jpg (39.15 KiB) Viewed 2283 times

User avatar
a01butal
Approved Member
Posts: 2397
Joined: Sat Jan 12, 2008 9:15 am
Location: Shorewood, IL
Has thanked: 33 times
Been thanked: 39 times

Re: Motor label restoration

Post by a01butal »

R Cane wrote:Sonic is done. Well, I need to tweak the color a little, but that's easy.
sm_green.jpg
That's really sweet, when you're ready will they be for sale?
___________________________________________________________


This is all very interesting!

User avatar
R Cane
Approved Member
Posts: 1097
Joined: Mon Apr 21, 2014 9:06 am
Location: Northeast Ohio
Has thanked: 155 times
Been thanked: 63 times

Re: Motor label restoration

Post by R Cane »

Possibly, but as I said, I want to do some testing first. I'm really anal about taking money for something that isn't as good as it should be...

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: Motor label restoration

Post by tamiyadan »

.

User avatar
slotcarrod
Approved Member
Posts: 4415
Joined: Tue Nov 25, 2008 10:57 pm
Location: Calgary Alberta Canada
Has thanked: 1 time
Been thanked: 41 times

Re: Motor label restoration

Post by slotcarrod »

Looks like MCI has the Sonic ones already! But no letters! :roll:

User avatar
R Cane
Approved Member
Posts: 1097
Joined: Mon Apr 21, 2014 9:06 am
Location: Northeast Ohio
Has thanked: 155 times
Been thanked: 63 times

Re: Motor label restoration

Post by R Cane »

I saw that...after I had done mine, of course. :?
As far as the letters, all of the green Sonics and the Tri-Sonics that I've had all had the letter as a very small sticker on top of the label.
There are lots of places to get little letter stickers, so I wasn't overly concerned about that part.
I'm still researching different sources for printing the labels, and how I'd like them done.
Hopefully not too much longer.
:)

USA-1
Approved Member
Posts: 328
Joined: Mon May 03, 2010 5:20 pm
Location: Southern California, USA

Re: Motor label restoration

Post by USA-1 »

I got tired of looking at my naked label Reedy Ultra series motors on my Lazer's. These labels are thick, really high quality. I only had one Mr T, Mr M transfer the small beat up label and a Mr X. Maybe make a small label like Mr M and placed them over..
Image
This one label was missing, no info except 19 Q, no info on 19 Quad Ultra series..
Image

User avatar
WebSteve
Approved Member
Posts: 238
Joined: Thu Mar 27, 2008 12:29 pm
Location: Lake Forest
Has thanked: 3 times
Been thanked: 38 times

Re: Motor label restoration

Post by WebSteve »

These are several strips right off the printing press, from first run. Still had them! I designed these.

Steve Husting
Attachments
early-reedy-motor-labels.jpg

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • Team Associated Green Label Motor and others
    by danglenode » » in Vintage Electronics
    15 Replies
    2791 Views
    Last post by templeofspeed
  • Trinity pink label motor cleanup
    by GeneralZod » » in Vintage Electronics
    4 Replies
    1137 Views
    Last post by RC10resto
  • Revtech motor purple label pink endbell
    by AndrewSi » » in Vintage Electronics
    3 Replies
    1060 Views
    Last post by duder1982
  • RC10 Motor Restoration
    by limestang » » in RC10 Buggy Forum
    1 Replies
    638 Views
    Last post by Zedmaster
  • restoration of the magnesium motor mount, any tips?
    by Tamiyaterror » » in Yokomo Forum
    7 Replies
    1687 Views
    Last post by Boss155
  • JRX2 - Restoration/modification - 5 link mid motor
    by dhenry » » in Losi Forum
    53 Replies
    8810 Views
    Last post by matt1ptkn
  • Removing a kit box label question
    by marlo » » in Off-Topic / Chit-Chat
    8 Replies
    743 Views
    Last post by slotcarrod
  • Peak Racing 2400mah battery label
    by zcola » » in Vintage Electronics
    6 Replies
    1718 Views
    Last post by kenooze

Return to “Vintage Decals / Logo Scans”

Who is online

Users browsing this forum: No registered users and 0 guests