So I know a lot of you have done it. Is the Spektrum module the best way or is there a Futaba module I can use.
If you have pics thats great. Basically I dont want to use any Chinese crap. I want a good 2.4 vintage transmitter with relatively inexpensive receivers for the fleet.
I have a couple Futaba Magnum Jrs. I really like them. They just have the right feel to them in my opinion. Is it possible to convert these to 2.4ghz?
Or convert any of the older radios for that matter?
Last post
post your build thread.. sure guys on here will follow..
Hi fellow vintage radio nutters.
I have a 1024 handset which I would like to convert over to 2.4 spread spektrum. I have plenty of Spektrum receivers and wanted to find out if there's a way to use a Spektrum module for this radio?
Ok this is my first post. I acquired a rc10t back in 1992. My wife was quick to take it as hers because of the fun factor. So here it is almost 20 years later and my wife and I got bit by the rc bug again. Well the tech has changed and we quickly...
Last post
I also want to upgrade to a MIP CVD setup. Can anyone tell me what kit part number will fit on the rc10t? I also see the t4 top shaft will fit so I'm going to upgrade that and the slipper also. Let me see, RPM a-arms and tranny case upgrade. New...
Just ran across these. Looks like Team Associated's trying to make the most out of their SC10/RTR plan. Tower shows the brushless versions at $225/$230.
Everyone else has it, so there's really no need to bother. That's what I told a friend of mine who was reluctant to start racing because he didn't have one. No one I can think of(including me)runs an AM/FM radio at my track. Or PCM(although I would...
Last post
Personally I have had no problems with the Traxxas Link system. I have three transmitters (me & 2 kids) and have bought receivers for every buggy we run. I had no problem setting them up, but I am not looking to set exponential steering or anything...
I have a couple olderAirtronics mx-3 radios and I was wondering if anyone has seen a 2.4 conversion for them? I always loved this radio abs I'd love to convert it too continue using it for racing.
Purchased an additional Associated XP TRS401 receiver from ebay, antenna is cut to about half original length. Is that a no-no with these like the older 75MHz stuff?
Last post
I don't own that particular model, but the 3 2.4GHz receivers i have all have about a 5-8 inch long antenna. Came that way straight from the box. But like suggested, do a range test, or have a very trusted Fail Safe if its a nitro.
I have a tidy old Futaba Attack R 2channel 27Mhz(bought new in 1987)that I'm
wondering if it can be converted to 2.4Ghz?
I know there are DIY sets out there,but they all seen to be used on 35 & 72Mhz PCM sets.
Has anyone had a go at doing one of...
Last post
did mine on a 27MHZ KO EXII set. Do some research first so that you will know what your getting into. Mine I used FRsky, should you go on that path, get the one with the telemetry as it has solved the servo Gitter problem. good luck.