motor dynos

Brushed, nicad, radios, etc...

Moderators: scr8p, klavy69

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

motor dynos

Post by tamiyadan »

.

User avatar
GJW
Approved Member
Posts: 2325
Joined: Mon Oct 15, 2007 7:22 pm
Location: AUSTRALIA!!
Been thanked: 1 time

Re: motor dynos

Post by GJW »

great work on fixing up these old guy's, an area of the hobby that's forgotten in all the collecting and showing off hype 8) 8) well done

User avatar
Mad Racer
Approved Member
Posts: 972
Joined: Thu Apr 09, 2009 10:50 pm
Location: Vintage at Boondal. Australia.
Been thanked: 1 time

Re: motor dynos

Post by Mad Racer »

The Motor lab looks to have some parts that share with the Tekin Dyno.

I bought mine not so long ago and does a ok job so far. Testing on stock motors but thats all. Does load the slave motor up good when you want it too.

I had the Shinwa Motor Dresser back in the late 80's and is crap. Only tells you revs and amps. Rev counter is just a dial. I remember my Technigolds flat out was 21,000 @ 2.5 amps LOL. Very tricky to get 6 min . Don't ask why 6min racing in mod when everyone else was 5 min in Mod.

They did bring out a Tourque Dresser too. I never had it as i paid over 100 big ones for mine 2nd hand.
Vintage . Older is Better !!!!!!! Vintage At Boondal, Australia.
http://www.rctech.net/forum/australian-racing/548133-off-road-vintage-boondal.html

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: motor dynos

Post by tamiyadan »

.

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: motor dynos

Post by tamiyadan »

.

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: motor dynos

Post by tamiyadan »

.

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: motor dynos

Post by tamiyadan »

.

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: motor dynos

Post by tamiyadan »

.

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: motor dynos

Post by tamiyadan »

.

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: motor dynos

Post by tamiyadan »

.

User avatar
CAT3K
Approved Member
Posts: 641
Joined: Mon Dec 06, 2010 7:28 am
Location: UK

Re: motor dynos

Post by CAT3K »

Out of curiosity, have you ever come across the Shinwa Rolling Road? It seems a better idea for testing motors in a buggy rather than the bench.

I've seen them advertised for sale in my old magazines (1990-1992ish) but never seen a picture of one.



Paul.

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: motor dynos

Post by tamiyadan »

.

tamiyadan
Approved Member
Posts: 1690
Joined: Wed Apr 07, 2010 4:45 pm
Been thanked: 6 times

Re: motor dynos

Post by tamiyadan »

.

AscotConversion
Approved Member
Posts: 284
Joined: Fri Jun 13, 2008 6:19 pm
Location: CHICAGO USA
Has thanked: 30 times
Been thanked: 39 times

Re: motor dynos

Post by AscotConversion »

I found that the TurboDyno actually did tell you what your motors where doing. This was especially true if you had a known good motor. Even today, a lot of the oval guys have converted the Turbo to integrate with brushless equipment and they still use the dyno.

I also used the CS dyno, which was a flywheel like the Fantom/RSR. I actually figured out a lot about the Reedy MVP when they were big as handouts in the late 90's. I think the Turbo is better, but if you work with the dyno you can get an idea of how things work, brush cuts, springs, etc. The thing is you have to translate it to the track. :mrgreen:

V12
Approved Member
Posts: 1219
Joined: Thu Mar 31, 2011 7:53 pm
Location: EU
Has thanked: 13 times
Been thanked: 78 times

Re: motor dynos

Post by V12 »

If you ever have access to a Robitronic dyno then try this one. It´s also a flywheel dyno but much better as some others as the results are not dependend on the variance of voltage as it´s when using a battery. You´re using a 12V lead battery with this dyno and the voltage is regulated inside of the dyno. For this reason the Robitronic dyno was the most expensive one in the past.

I think you could convert any dyno for brushless use. The problem just is some results as power numbers or efficiency are not true anymore as the internal resistance is much higher afterwards. RPM readings are still true.
Of course you still could compare motors and a fast motor is still a fast motor.

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “Vintage Electronics”

Who is online

Users browsing this forum: No User AvatarAhrefs [Bot] and 13 guests