SHY's Tamiya B.A.R. Honda Hotshot Evolution

The place for all things Tamiya.

Moderators: scr8p, klavy69

User avatar
SHY
Approved Member
Posts: 62
Joined: Thu Mar 24, 2011 10:22 am
Location: Oslo, Norway
Has thanked: 7 times
Been thanked: 5 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by SHY »

Agreed Thorp diffs are very expensive. Plus a lot of work to adapt the driveshafts. However the performance gain is unbelievable! Old style "loose" gear diffs are worthless for racing.

I'll soon make it Evo V, then I'm out of ideas :)
Svein Harald Ytternes AKA SHY
The Nordic Vintage Challenge: http://www.ymr.no/nvc
Visit my showroom: http://tamiyaclub.com/showroom.asp?id=22039

User avatar
GoMachV
Approved Member
Posts: 11156
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 743 times
Been thanked: 2146 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by GoMachV »

Shy, if you ever want to toss the plastic chassis and do something different, I am open to redesigning my chassis set for a custom build. As it sits, my chassis sets are not terribly heavy but we could make it lighter and more racy. I'd be happy to work with you on it, clearly your work is top notch!
Attachments
IMG_0877.JPG
IMG_6208.JPG
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

User avatar
snowfox
Approved Member
Posts: 73
Joined: Mon Feb 29, 2016 7:31 am
Location: London
Has thanked: 10 times
Been thanked: 2 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by snowfox »

Could the new MIP Monster Beetle Diff be adapted? http://www.miponline.com/store/mip16210.html
Give it Gas!

User avatar
GoMachV
Approved Member
Posts: 11156
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 743 times
Been thanked: 2146 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by GoMachV »

No, at least not without major work. They eliminate the bearing adapters on the Blackfoot so instead of a 5x11mm bearing they use a 10x15 flanged. You would need a 10x11mm bearing to fit the hotshot :lol: not possible
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

User avatar
RC104ever
Approved Member
Posts: 1506
Joined: Sun May 22, 2011 11:34 am
Location: Burlington, Ontario - Canada
Been thanked: 8 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by RC104ever »

GoMachV wrote:
RC104ever wrote:
Thanks but that is really pricey for a rear shock tower. Does anyone make a clone of that part or is there another compatible part that would work? I want one but not that badly.

$9? That's pretty cheap imo!
Conversion to CAD is $12 plus $15 CAD shipping. Not so cheap anymore, unfortunately. I don't need one of these that badly. Surely someone makes clones of this thing?
- Chris
Lots of cars...so many cars

User avatar
GoMachV
Approved Member
Posts: 11156
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 743 times
Been thanked: 2146 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by GoMachV »

Ahh yeah I guess it could add up. It's listed with free shipping in the USA so I hadn't considered that.

I make and sell towers, and have one for the boomerang already. My towers are all $15 plus shipping, and average shipping to Canada is ~$5 making it almost exactly what that original tower costs, so really no benefit unless you want it custom
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

User avatar
SHY
Approved Member
Posts: 62
Joined: Thu Mar 24, 2011 10:22 am
Location: Oslo, Norway
Has thanked: 7 times
Been thanked: 5 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by SHY »

Jeff, YOUR work is top notch! I'm just a mere mortal :)

We all have different views and preferences as to our builds, which is perfectly fine. I see more and more of these option chassises. I even did a couple by hand as a kid, from my own creativity (never saw any option chassises). One here:

Image

Still for me for the Hotshot I prefer the std chassis. It's quite stiff once you add the CRP fibreglass battery tray. And I like the "original look" of it. And the car is really really fast already.

One of the big downsides back in the day was heat and that the mechanical speedo needed servicing. Now there's no need to upen her up anymore :)

That being said I'm a huge fan of your work and I'd love to work on something else with you in the future for sure!

Btw did you see my Dyna Storm Evolution in here?
http://www.rc10talk.com/viewtopic.php?f=32&t=41131

There's a dedicated Facebook group for it as well:
Project Dyna Storm Evolution
https://www.facebook.com/groups/1533568173577273/?fref=ts

I think you might like what we've done :wink: How about a laser cut alu chassis with kickup for instance?...

For the Hotshot I have an idea as how to make a better solution for the rear tower, and fix a weak point...

I got another idea just now too!... :mrgreen:

Anyway, this is the 8th vintage race I'm about to do with this thing now. And I would like to get to some other cars I have waiting after that:
-CAT XLS with all the bells and whistles
-Re-re Optima
-Gallop MK II (suicide mission I know)
Svein Harald Ytternes AKA SHY
The Nordic Vintage Challenge: http://www.ymr.no/nvc
Visit my showroom: http://tamiyaclub.com/showroom.asp?id=22039

User avatar
GoMachV
Approved Member
Posts: 11156
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 743 times
Been thanked: 2146 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by GoMachV »

I will have to investigate that Dyna Storm! I had one of the originals and I marveled at how advanced it was

I totally understand your point on the chassis! And for sure, we will work together in the future. Your builds are very impressive
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

mark
Approved Member
Posts: 61
Joined: Sat Oct 17, 2009 10:53 pm
Location: Willow Grove, NB, Canada

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by mark »

Wow, that's a very trick looking Hotshot!

User avatar
SHY
Approved Member
Posts: 62
Joined: Thu Mar 24, 2011 10:22 am
Location: Oslo, Norway
Has thanked: 7 times
Been thanked: 5 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by SHY »

Thx Mark! :mrgreen:
Svein Harald Ytternes AKA SHY
The Nordic Vintage Challenge: http://www.ymr.no/nvc
Visit my showroom: http://tamiyaclub.com/showroom.asp?id=22039

stuey
Regular Member
Posts: 23
Joined: Mon Feb 01, 2016 2:13 pm

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by stuey »

Can I ask where you got the red front upper hinge pin brace from? I am just about to get hold of my 1st Tamiya 4wd after many years racing, and I am inspired by your work. I want to use the car to race occasionally, so it needs to be strong. Thanks :D

User avatar
SHY
Approved Member
Posts: 62
Joined: Thu Mar 24, 2011 10:22 am
Location: Oslo, Norway
Has thanked: 7 times
Been thanked: 5 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by SHY »

Thx! Ooooo... it was from a member on TC, see through my links on TC and see if it's mentioned there. I don't remember who it was I'm afraid. OTOH maybe ORB could draw and 3D print them?

Edit: Here it is! http://tamiyaclub.com/showroom_model.asp?cid=106011&id=22039

Quote: "It has a front suspension brace from SynchroCNC (ebay)"
Svein Harald Ytternes AKA SHY
The Nordic Vintage Challenge: http://www.ymr.no/nvc
Visit my showroom: http://tamiyaclub.com/showroom.asp?id=22039

User avatar
SHY
Approved Member
Posts: 62
Joined: Thu Mar 24, 2011 10:22 am
Location: Oslo, Norway
Has thanked: 7 times
Been thanked: 5 times

Evo V is in the works...

Post by SHY »

Sorry, just too little time With 3x small crazy kids... so here's the lazy version through Google Translate (kinda fun to see the result):

https://translate.google.com/translate?hl=en&sl=no&tl=en&u=http%3A%2F%2Frsb.se%2Farena%2Fshowthread.php%3F90521-SHYs-Re-re-B-A-R-Honda-Hotshot-gt-NVC-Warrior

Click on "Sista" = last page to see the latest development.

Image
Svein Harald Ytternes AKA SHY
The Nordic Vintage Challenge: http://www.ymr.no/nvc
Visit my showroom: http://tamiyaclub.com/showroom.asp?id=22039

User avatar
SHY
Approved Member
Posts: 62
Joined: Thu Mar 24, 2011 10:22 am
Location: Oslo, Norway
Has thanked: 7 times
Been thanked: 5 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by SHY »

Updated again... here's a couple of teasers:

Reinforced rear damper stay:

Image
-it now also gets support from the roll cage

Big Wig "air box" customized and mounted to the Hotshot:

Image

Image

Looks ok?
Svein Harald Ytternes AKA SHY
The Nordic Vintage Challenge: http://www.ymr.no/nvc
Visit my showroom: http://tamiyaclub.com/showroom.asp?id=22039

User avatar
civilguy
Approved Member
Posts: 1399
Joined: Thu Jun 12, 2008 9:43 pm
Location: Arizona
Has thanked: 3 times
Been thanked: 8 times

Re: SHY's Tamiya B.A.R. Honda Hotshot Evolution

Post by civilguy »

stuey wrote: Fri Jan 20, 2017 3:55 am Can I ask where you got the red front upper hinge pin brace from? I am just about to get hold of my 1st Tamiya 4wd after many years racing, and I am inspired by your work. I want to use the car to race occasionally, so it needs to be strong. Thanks :D
FWIW CRP 1650 was the original upper a-arm brace for the Hotshot series. You can still find them occasionally.

http://www.rcchopshop.com/crp/1650.html (Eric doesn't have any parts left... sadly.)

SHY- I couldn't find SynchroCNC on eBay. :?:
The preceding contained opinions, beliefs and thoughts that all may not agree with. No offense was intended at any point. Carry on.
Jeff

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “Tamiya Forum”

Who is online

Users browsing this forum: No User AvatarAmazon [Bot] and 21 guests