New! RATCHETING Hi-Lift Jacks Info & GIVEAWAY!
Posted: Tue May 26, 2015 6:58 pm
At Last! I have not done anything for a bit, and these are why- Something I've wanted to do for several years, but could not afford to devote this much time to a single offering. The Ratcheting Poseable Hi-lLift Jack!
A LOT of work goes into these, many pieces, programs, fixtures and time: But now that I have one in hand it was ALL worth it! These are 6061-T6 Aluminum, fine glass-beaded for a satin 'Raw Steel' look. Precision tool steel pin, Titanium spring, SS hardware, 1st Class. You flip the small round button to point in the direction you want, and it clicks each hole until you get where ya want- That's it! Poseable handle with nylon washers for long life. I can not begin to explain how neat-O these are with words alone, so I have put a 1 min. video on my site that shows how these work- Turn your speakers UP to hear the ratchet mechanism!
CLICK HERE FOR VIDEO! https://www.youtube.com/watch?v=WI6otnUjrxc&feature=em-upload_owner
Price each shipped is $64.99 in USA, $8 S&H for Int'l. orders.
Want to pay less? SEE BELOW!
ORDERING NOW SIMPLIFIED- PLEASE READ
There are 2 ways to order (Details below) But the following is the same for both:
-BOTH need be done by the order cutoff date of June 7th to be guaranteed an item! Only SINGLE BATCHES are cut to order and after that I have NO inventory, so ACT NOW!
-All payments are now sent in USD directly to my Paypal address, [email protected] (Copy & paste to avoid misspellings.)
- International orders will be charged a flat $8 -This covers a whole order regardless of how many items
- Make SURE I have your mailing address, do not send as 'Gift'
-Estimated Ship date: July 15, 2015
Other than that, you have 2 choices to order- You may EITHER-
- Send a deposit of $5 for EACH item ordered, and I will then send you a 'Balance Due' to the SAME Paypal address the deposit came from, just before they're ready to ship! Easy!
-OR, to GET A $5 DISCOUNT, Pay Up Front! Simply send the total at the discounted rate of $59.99 per jack- Again, Easy! (Int'l. orders add S&H.)
Notes
We are a specialty manufacturer that does NOT maintain an inventory, and most items are never re-done again. Please submit your deposit/payment by midnight the 7th of June (12 days): I'll already be cutting, so if you're not on the cut list, you'll very likely miss out.
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
-------------------------------GIVEAWAY!!------------------------
As per usual practice, I am GIVING AWAY one of these gems to a lucky member! (Now I KNOW I'm heading straight to Heaven upon my demise!) All you need do is post here, and check back by June 5th (When the Winner is picked) to see if you've won: Easy 'nuff? This is important as there is ONE simple rule-it is up to the winner to claim their prize by sending me their shipping address within SEVEN DAYS or forfeit the prize, so don't snooze and Good Luck! Chris REC
A LOT of work goes into these, many pieces, programs, fixtures and time: But now that I have one in hand it was ALL worth it! These are 6061-T6 Aluminum, fine glass-beaded for a satin 'Raw Steel' look. Precision tool steel pin, Titanium spring, SS hardware, 1st Class. You flip the small round button to point in the direction you want, and it clicks each hole until you get where ya want- That's it! Poseable handle with nylon washers for long life. I can not begin to explain how neat-O these are with words alone, so I have put a 1 min. video on my site that shows how these work- Turn your speakers UP to hear the ratchet mechanism!
CLICK HERE FOR VIDEO! https://www.youtube.com/watch?v=WI6otnUjrxc&feature=em-upload_owner
Price each shipped is $64.99 in USA, $8 S&H for Int'l. orders.
Want to pay less? SEE BELOW!
ORDERING NOW SIMPLIFIED- PLEASE READ
There are 2 ways to order (Details below) But the following is the same for both:
-BOTH need be done by the order cutoff date of June 7th to be guaranteed an item! Only SINGLE BATCHES are cut to order and after that I have NO inventory, so ACT NOW!
-All payments are now sent in USD directly to my Paypal address, [email protected] (Copy & paste to avoid misspellings.)
- International orders will be charged a flat $8 -This covers a whole order regardless of how many items
- Make SURE I have your mailing address, do not send as 'Gift'
-Estimated Ship date: July 15, 2015
Other than that, you have 2 choices to order- You may EITHER-
- Send a deposit of $5 for EACH item ordered, and I will then send you a 'Balance Due' to the SAME Paypal address the deposit came from, just before they're ready to ship! Easy!
-OR, to GET A $5 DISCOUNT, Pay Up Front! Simply send the total at the discounted rate of $59.99 per jack- Again, Easy! (Int'l. orders add S&H.)
Notes
We are a specialty manufacturer that does NOT maintain an inventory, and most items are never re-done again. Please submit your deposit/payment by midnight the 7th of June (12 days): I'll already be cutting, so if you're not on the cut list, you'll very likely miss out.
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
-------------------------------GIVEAWAY!!------------------------
As per usual practice, I am GIVING AWAY one of these gems to a lucky member! (Now I KNOW I'm heading straight to Heaven upon my demise!) All you need do is post here, and check back by June 5th (When the Winner is picked) to see if you've won: Easy 'nuff? This is important as there is ONE simple rule-it is up to the winner to claim their prize by sending me their shipping address within SEVEN DAYS or forfeit the prize, so don't snooze and Good Luck! Chris REC
So, these are meant to hold up the corner of a 1/10 truck, or look fantastic on a vehicle, and they will totally do that. Chris REC
