RC10 Hinge pins
Posted: Tue Dec 20, 2016 10:10 pm
Are the hinge pins on an RC10 the same if you're using Andy's arms? Also, is the Lunsford NIX 91 STEALTH RC10 Titanium Hinge Pin Kit the same pieces for a classic RC10? These are the sizes listed for the NIX kit --
2 - .124" x 1.017" (Outer Front)
4 - .124" x 1.145" (Outer Rear and Kingpin)
2 - .124" x 1.560" (Inner Front)
2 - .124" x 1.980" (Inner Rear)
22 - 1/8" E Clips
Thx.
2 - .124" x 1.017" (Outer Front)
4 - .124" x 1.145" (Outer Rear and Kingpin)
2 - .124" x 1.560" (Inner Front)
2 - .124" x 1.980" (Inner Rear)
22 - 1/8" E Clips
Thx.