RC10Talk - The Net's Largest Vintage R/C Community

Open Contest This Month! Any Manufacturer!

OK, this will be the thread for the June 2017 Build of the Month Contest.

Refresh yourself with the rules before entering - http://www.rc10talk.com/viewtopic.php?f=98&t=35923

Please remember, no chit chat until all of the entries are locked in so they can stay grouped together.

GOOD LUCK!!!

************************************************************************

** Place Holders **

If you would like to enter the contest, create a post as a "place holder". DO NOT POST ANY PICS. You have until the 5th of the month to lock in a spot (10 entries max). You will then have 2 days to edit your post and attach the pics of your entry. The poll will be started on the night of the 7th. If you have not submitted your pics by then you will be removed from the contest.

Modified lazer ZX
Fybrelite ZXR towers front an rear
AE B4 FT shocks
Alycon Rama custom trans shaft for AE B4 style slipper an spurs
Special uni crank setup
Full bearings incl belt tensioner's
AE turnbuckles
New kyosho rod ends an pivot balls
SS screws
TBG body/wing/undertray an gear cover
New universals
Polished various bit an bobs

did this one with a new rere worlds chassis.

-Raceco foam core chassis reshaped to match the lines of the Chenowth body
-MIP SP-1 transmission
-Litesink motor plate
-Race Prep Power Zone Hack Attack motor
-Race Prep "Superbones" dog bones
-Hot Trick rear arms
-Andy's front arms
-Lundsford Punisher turnbuckles
-Victor Engineering esc
-Integy Piggyback Reservoir Shocks (piggyback reservoirs are functional)
-Aluminum bellcranks
-Assorted carbon fiber and RPM parts
-Dyed any remaining parts black and replaced most of the fasteners with aluminum ones

My Turbo Optima

RC10B3 Team Buggy . Has a short chassis and a dejavu body .

My 93WCS runner in its first form

This is my Tamiya Fox with a Sand Scorcher body & Porsche 959 drivers cockpit. Aftermarket RC10 alloy wheels fitted to machined front Tamiya axles so I can use the RC10 bearings whilst the rear wheels were machined to fit the Tamiya axles
Raced in the Vintage class 'Plastic Fantastic' which is for plastic models with non adjustable suspension arms (camber caster etc).
I'm not much of a racer as such, I just like my models to look as scale as possible whilst on the track.

This is my recently finished Kyosho Scorpion 4x4 conversion project car , you can see the build thread here [urlhttp://www.rc10talk.com/viewtopic.php?f=30&t=41438][/url]

Losi xxt cr graphite plus, stripped and rebuild with some new parts took a while to find a nice one, plus a few hard to find trinity blue gold bits

Fresh out the box and one with grandpa...

Ok guys, get your pics uploaded.

quite the world representation here. Got a few from Australia, some from the UK, some from the US and even one from Sweden this time around.

Good luck guys.

Todd

Whoa! What a start!!!

Can't wait to see the other ones!

Nobody told me it was Kyosho month. Nice cars guys!