Page 1 of 1
xx cr chassis
Posted: Sun Jan 11, 2009 2:22 pm
by lowrydesign
does the xx cr graphite use a x long, long or standard chassis? its stamped on the rear batery area where the four holes are
i know the part #A-9902 Graphite/Composite Standard Chassis, but the hobby shop says that number doesnt exsist??
they say its A-9901 Graphite/Composite Short Chassis
any one got a clue as to whats right?
Re: xx cr chassis
Posted: Sun Jan 11, 2009 6:33 pm
by GJW
standard chassis is listed as the a-4100. there are 4 listed in graphite a-9901,02,03,04 short,standard,long,extra long. id say 9902 is the original length
Re: xx cr chassis
Posted: Sun Jan 11, 2009 6:41 pm
by bearrickster
I am pretty sure the have all been discontinued. but Bill Cline has some I am not sure what part numbers he has and Sheldon Hobbies on Ebay has some XX chassis to.
Re: xx cr chassis
Posted: Sun Jan 11, 2009 7:59 pm
by FasterLouder
I was always curious about the XXL-Was it a conversion kit sold by Losi?
What class of racing was it designed for?
Cool looking car-I bet there aren't too many around.
Re: xx cr chassis
Posted: Sun Jan 11, 2009 11:28 pm
by JK Racing
the x-long chassis was for the CR truck, you needed the extra length to stabilize it. I ran with a long chassis for a while, went to the XL and couldnt believe the difference it made. truck felt so much better with the longer chassis.
My understanding is they did the same thing when releasing the XXXT-CR, longer truck chassis.
Re: xx cr chassis
Posted: Mon Jan 12, 2009 12:13 am
by y2kgtp
JK Racing wrote:the x-long chassis was for the CR truck, you needed the extra length to stabilize it. I ran with a long chassis for a while, went to the XL and couldnt believe the difference it made. truck felt so much better with the longer chassis.
My understanding is they did the same thing when releasing the XXXT-CR, longer truck chassis.
Correct....the XXXT-CR has a longer chassis....I believe as well as the current Losi RTR's like the Desert Truck and Speed-T.
Re: xx cr chassis
Posted: Mon Jan 12, 2009 6:34 pm
by Mazdaj
I have a new-built XXCR Kinwald-it has "STD" stamped into the chassis at the rear near the battery box. Crossing that to the instruction manual showed A-9902 main chassis as the part number. Assuming the XXCR is the same?
Re: xx cr chassis
Posted: Mon Jan 12, 2009 6:57 pm
by bearrickster
My XX has std on it also
Re: xx cr chassis
Posted: Mon Jan 12, 2009 7:15 pm
by THUNDERSTRIKE1
my xx Graphite has STD also AND ITS BRAND NEW.
JUST NEED TO FIND A REAR plate the arms and tranny mount to to complete it;DON
Re: xx cr chassis
Posted: Mon Jan 12, 2009 7:37 pm
by y2kgtp
I'm glad nothing I have got marked as having a STD label
Re: xx cr chassis
Posted: Tue Jan 13, 2009 5:32 am
by lowrydesign
awsome info guys thanks!!
Re: xx cr chassis
Posted: Tue Jan 13, 2009 7:31 pm
by toykilla
I have a new XX with "STD" on it, and a new XXT with "L" marked on it.