RC10Talk - The Net's Largest Vintage R/C Community

Gone for some test prints...


I'll put a comparison between the original parts and the printed parts later on after the printed/cleaned part are fully dry and cured...

As per my last post concerning the fitment of th re-re motor mount. I just got in all the parts to check for fitment of the re-re 870c slipper on an original 870c, works etc. As you can see from the photographs below it works and the fitment appears to be fine (not run it yet tho) although the rear ...

Personally I do both, depends on my mood and trust of cut lines. Tamiya or kyosho bodies no problem. I do not trust AE cut lines or holes. I would get it mounted first then paint. For the body mount holes I like to leave the posts off and get the body fitting properly, then add the rear post by look...

Speaking of personalized builds, one member on TC has built this beauty: https://i.ibb.co/dBTVcB9/IMG-3078.jpg I think the gold anno with the light blue color he selected looks amazing! You can read about the build and see more pics here: https://www.tamiyaclub.com/forum/index.php?/topic/106419-wtcc...

Time to make the donuts.

dang, I was hoping it was just temporary. The tires are just such an odd size. I found some killer paddles with the same styling, but they are way large :lol: I did draw up stock wheels as well as some to fit the DE racing mini outlaw tires, but those are kind of a last resort if the stock ones come...

The test print to check the last scans was done successfully... I rescan the head of the Super Wheelie differently, with a slightly better result again... https://i.imgur.com/nxUoTDU.jpeg The Big Bear driver figure scan is actually much better than what I thought it would be... I still wish to find ...

You should be able to move the rear arm mounts forward to shorten the wheelbase. Looks like you're in long wheelbase setup right now. I hadn't even noticed that was where I had the rear arm mounts. Thanks for spotting it. 👍 I'm also noticing the front is a bit narrow. A set of GT long front axles i...

Today was a very productive day (or maybe should I say yesterday, looking at my clock)... Frist, I put the white golden Eagle on a chassis... The chassis was already assembled (it arrived this way). This car is very unlikely to run... https://i.imgur.com/LcYC4AP.jpeg ... unlike the black golden eagl...

I can tell you exactly how that ends.

Buy 40th kit

Buy all the Fan parts and trans

Assemble

Realize you have 60% of a car leftover

Order the parts to finish that one

Now that AE is catching on, MIP needs to get with it too and rerelease what everyone wants... not just a new screwdriver

I'm sure they could have a ReRe section too.

MIP will never do it

But....

In addition to having springs that are too soft, the tiny front shocks are horrible leakers. A front shock upgrade is needed. I have a spare set that are the right length and seem like a natural fit. . 1000011051.jpg . However stiffer shocks = more shock tower deflection. The tweaked shock tower I p...

Rook's Tx from the movie. https://i.imgur.com/pKuYpsP.jpg Pretty sure I have those same gloves too :lol:. $10 from ebay. https://i.imgur.com/cDiddKQ.jpg Came with tiny little vintage G plug servos and another FP-R4H. https://i.imgur.com/srI9drV.jpg https://i.imgur.com/nN0BaY6.jpg Just found out that...

Those parts look fantastic! The slight shading from the sun just gives it character and let's everyone know this one's a legit, OG, Made in America RC10. :D Thanks! They did come out really clean. I was worried when I pulled the parts out of the peroxide at first, they were still brown and reddish ...