Futaba mc10 FET might be the right looking esc you are after... I don't know how big they are, but do seem to be normal sized. i was thinking the same thing-- & I have one (well, it is atleast Futaba). I'd be happy to donate it, but am not sure if it's condition will meet this build's level of ...
those rear tires aren't going to do much for traction in grass-- get a pin spike or tractor tread or paddle tires (sand paws) Y}You should be able to crank the ground clearance up by moving the spring collars down so that the suspension does not settle at all with the car's weight on it. It may ride...
It's been a while since I did a build thread - Sooo-- I moved to South Carolina, just south of Charlotte. Been here 9 years now-- had no idea it was such an RC racing hotbed --particularly outdoor 1/8th scale. Well, one of the tracks just opened a indoor carpet offroad track. I have a TON of spare p...
More initial build pics. During the build, I was surfing RC10Talk and somehow got obsessed with blue shocks. I promptly spent a few hours scouring ebay buying up all I could find. Unfortunately, they never made them in the 0.71" front buggy shocks, so I settled for the shortest I could find (10...
so the carpet setup is going well, just trying to get it the correct width. 20221124_094331.jpg using RPM Rustler arms (pn 80495) and the Custom Works front hex conversion (pn- 7290). I am not crazy about the upper link mount on the c-hub, but we'll see how it goes. Also, the plastic looks to be shi...
sooo, while I was researching and head scratching, I wanted to improve the front hinge block to allow me to keep the 10T pin tie-bar. I ended up milling a rabbet out at the same thickness as the tie bar, to allow the RPM front arms to fit without modifying them (weaken them) 20221203_220323.jpg 2022...